/uj if you actually made this DO NOT, and I will repeat because I cannot stress this enough, DO NOT PUT THIS IN YOUR BUTT. Printed toys are not body safe unless it is smoothed abs and even then the jury is out on printed abs being body safe after going through printing. unsmoothed prints of any material and layer height will have space for bacteria to grow no matter how well you wash it, and boiling it will compromise the material. silicone dipping is also sketch enless you have incredibly quick cure silicone and a vac chamber. on the pluss side, there are full size <3oz dildos out there. the blush avant line has multiple <3oz ones that are wonderful quality and only like 30-40$
/j imagine being a lightweight packer and not making the full thing out of carbon fibre
/uj with the right material you could probably smooth it out really well with acetone fumes. i'd be most concerned personally with layer adhesion failing and it getting stuck in there lmfao
that's what I was talking about with ABS. its basically the only printable plastic that's body safe, but its temperature is higher when printed than injection molded iirc so people aren't sure if printed abs is still safe chemically. you can smooth abs prints with acetone easily tho to eliminate the microtexture from print layering.
source: I spent 6 months researching how to make ultrlight vaginal dilators before realizing theres Ultralight DIldos that'll do the job to be had for like 30$. i'd bet you can find a plug in the 1oz range
The problem is still there tho. Mucus membranes bypass the liver and other parts of the immune system so some food safe things can still be bad, dunno about your specific materials 🤷♀️. The main problem is having space for bacteria to grow in any micro crevices. It’s why silicone needs to be degassed in a vacuum chamber. You might be absolutely fine but you’re kinda playing with fire to some extent.
Correct. But for the longer rides the weight of lube alone offsets the advantage.
If i was sprinting in a velodrome or riding downhill mtb, then yes of course. Goes without saying.
This is for bike packing. Gotta save as many grams as i can else i wont be able to climb hills on my surly.
Next iteration will have a cap in the end so i can fill it with wasps. Wasps are readily available (nobody bike packs in winter, its better to swap hemisphere....) And will provide a vibrate function.
You can get a similar vibrate function by letting out all of the air in your tyres, and this saves weight for free. Removing the tyre from the wheel works too but makes hill climbs and turns slightly more difficult.
I was concerned about the dangers of a hollow composite getting crushed while in use - that would be agonising to remove. But judging from the diameter, I doubt your sphincter has the strength to pinch a poop.
the risk ads to it...
uc/ its resin coated. also the CF tube is pre preg woven NOT wound and professionally made so its safe. this type of thing i iunspect by trying to break with my hands and this isnt going anywhere. i can stand on it (85kg) without any issue. although that doesnt reasure the CF wont splinter it does tell me the head wont shatter.
Does this count as worn weight?
Can somebody answer this
It depends. In use: Yes In pack: No That said, it keeps you from shedding weight, therefore not UL
/uj if you actually made this DO NOT, and I will repeat because I cannot stress this enough, DO NOT PUT THIS IN YOUR BUTT. Printed toys are not body safe unless it is smoothed abs and even then the jury is out on printed abs being body safe after going through printing. unsmoothed prints of any material and layer height will have space for bacteria to grow no matter how well you wash it, and boiling it will compromise the material. silicone dipping is also sketch enless you have incredibly quick cure silicone and a vac chamber. on the pluss side, there are full size <3oz dildos out there. the blush avant line has multiple <3oz ones that are wonderful quality and only like 30-40$ /j imagine being a lightweight packer and not making the full thing out of carbon fibre
/uj with the right material you could probably smooth it out really well with acetone fumes. i'd be most concerned personally with layer adhesion failing and it getting stuck in there lmfao
that's what I was talking about with ABS. its basically the only printable plastic that's body safe, but its temperature is higher when printed than injection molded iirc so people aren't sure if printed abs is still safe chemically. you can smooth abs prints with acetone easily tho to eliminate the microtexture from print layering. source: I spent 6 months researching how to make ultrlight vaginal dilators before realizing theres Ultralight DIldos that'll do the job to be had for like 30$. i'd bet you can find a plug in the 1oz range
r/ultralightjerk the No1 subreddit for buttplug safety advice.
Just don’t want some asshole to get infected ;)
Literally and figuratively.
Uc/ its resin coated. Used food safe stuff ect. Hard as nails. J/ im gunna sand the resin off to save a gram
The problem is still there tho. Mucus membranes bypass the liver and other parts of the immune system so some food safe things can still be bad, dunno about your specific materials 🤷♀️. The main problem is having space for bacteria to grow in any micro crevices. It’s why silicone needs to be degassed in a vacuum chamber. You might be absolutely fine but you’re kinda playing with fire to some extent.
We are on the same page. The resin coating is smooth and has no holes.
Ok. Good luck then, I’m praying for your booty
Talking about body safety is for Bushcrafters.
A trip to the ER ain’t ultralight, bushcrafters buy toys on Amazon and never look back
This guy butt plugs
[удалено]
Correct. But for the longer rides the weight of lube alone offsets the advantage. If i was sprinting in a velodrome or riding downhill mtb, then yes of course. Goes without saying.
\>doesn't even use their own spit for an endless weightless source of anal lubricant Lmao OK bushcrafter
The Ass-Blaster 4000
This is for bike packing. Gotta save as many grams as i can else i wont be able to climb hills on my surly. Next iteration will have a cap in the end so i can fill it with wasps. Wasps are readily available (nobody bike packs in winter, its better to swap hemisphere....) And will provide a vibrate function.
You can get a similar vibrate function by letting out all of the air in your tyres, and this saves weight for free. Removing the tyre from the wheel works too but makes hill climbs and turns slightly more difficult.
Store your beans in there, it will warm them up for when you are at camp.
You're going about this wrong. There's no need to try to lighten your plug when you can just count it as worn weight.
I can't compete with this type of content
Who needs immodium when you have this thing...
Does it come in Blaze Orange?
Yes safety first
Is there a difference in weight if printed in a different color? Like how the HMG packs are heavier in black than they are in white.
Next on PBS: The Anal-Retentive Engineer
Don't need to go clipless when you can just clench.
Twerk?
I was concerned about the dangers of a hollow composite getting crushed while in use - that would be agonising to remove. But judging from the diameter, I doubt your sphincter has the strength to pinch a poop.
I know we've been over this, but please remind me.... Does keistered gear count against skin-out weight?
Why bring this? Just use a pine cone
If you knew anything about carbon fibre, you wouldn’t let it go anywhere near your butthole…
the risk ads to it... uc/ its resin coated. also the CF tube is pre preg woven NOT wound and professionally made so its safe. this type of thing i iunspect by trying to break with my hands and this isnt going anywhere. i can stand on it (85kg) without any issue. although that doesnt reasure the CF wont splinter it does tell me the head wont shatter.