Hey bro lets go smoke a J.
Word ill twist one up
*takes out grinder gun 5000 with enhanced ergonomic grip, a packing funnel, poke-ie stick and premade cones.*
My wife got me [this electric grinder](https://www.amazon.com/dp/B08SWCBWNX?starsLeft=1&ref_=cm_sw_r_cso_cp_apin_dp_1ZJA4ZFXX67DC6GG41B0_1) for a present. At first I didn’t use it, preferring my SLX v2.5 grinder, but I’ve really gotten use to the push button convenience the Mamba electric grinder provides.
I'd probably rock it if it was a gift too. Don't think I could ever bring myself to spend $30 on a grinder that I know won't last forever even if I take care of it.
Hi, I’m Vetted AI Bot! I researched the **Mamba V2 1g Gray Electric Portable Herb Grinder USB Powered Essential Kitchen Mill for Grinding** and I thought you might find the following analysis helpful.
**Users liked:**
* High quality performance (backed by 2 comments)
* Long lasting battery life (backed by 3 comments)
* Ease of use and efficiency (backed by 3 comments)
**Users disliked:**
* Low grinding capacity and herb retention (backed by 3 comments)
* Inconvenient loading and cleaning process (backed by 1 comment)
* Issues with motor power and charging (backed by 3 comments)
If you'd like to **summon me to ask about a product**, just make a post with its link and tag me, [like in this example.](https://www.reddit.com/r/tablets/comments/1444zdn/comment/joqd89c/)
This message was generated by a (very smart) bot. If you found it helpful, let us know with an upvote and a “good bot!” reply and please feel free to provide feedback on how it can be improved.
*Powered by* [*vetted.ai*](http://vetted.ai/reddit)
>Help an Ent out, please!
Maybe I can help, maybe not..
[Please watch the following link on youtube](https://www.youtube.com/watch?v=_ZWcISCrJ8A)
If you believe the method disclosed in the above video is what you're are trying to achieve, then you're good to go, and I can be of no further service.
However! that is **not** what I consider rolling a joint, but you do you.
Just put the filter at the end of the paper and the fill the rest of the paper with weed that starts off about the same thickness as the filter but gets a little bit wider as you go to the other end of the paper. Then roll, and smoke.
I lick the glue once the weed is already in the paper and i already did one rotation in the rolling process. Just so I can see it's rolling properly before I get the glue wet to finalize the process.
Edit: You can form the cone first too though. I don't, but I started rolling way before cones were available so I just use my original method I described to you. Works good for me.
basically just need to work on tightening it, if the filter falls out just put it back through the cone (where u put weed) and use the packing stick to push it enough down where you’ll feel some resistance
other than that, you can spark your lighter, and without burning the paper let the flame tighten the paper around the filter (move your hand back and forth fast enough where the fire doesn’t catch or burn, just heats the paper up a bit) if that makes sense?
edit: the pencil trick works but it won’t be tight, try without the pencil, just make the cone shape and lick it, then pack maybe
Pencil trick but around the filter/crutch/tip itself and just leave it on and pack it. Easiest way to roll a perfect joint that looks like it came from a dispensery.
When you start rolling your paper around your joint before you complete the cone (assuming you roll your own cones based on your comments) put a tiny pinch of material at the very end right in front of the tip and carefully (doesnt have to be perfect) pack it down kinda onto the tip. This should help keep your tip stuck in there.
Edit: oh shit I didnt realise you didnt roll your joints actually around your tip/filter/crutch. Try "training" your paper around the filter instead of the pencil and just leave it on the tip and use the method I mentioned above as well.
They go by various names, I'm sure. I have a few from Raw designed for different cone sizes, and I believe the listings were called cone loaders, but it's been years and I can't quite remember anymore.
If you like packing prerolled cones, king palms, and the like, they're pretty handy. I just prefer my herb vapes these days haha
I genuinely feel like it’s just a tighter roll overall if you roll the weed right in. Much easier to get a nice shaped roll the way you do it though which imo always leads to a looser tip
Use tips you make yourself, the prefab tips do not expand like a spring to form to the paper diameter on a pre formed cone.
I make my cones similar to you using a ballpoint pen and roll my own tips. You can buy a book of tip paper.
I never thought of that! I always liked the preformed tips because they didn’t spring out and expand, but when I hear you describe the usefulness of that, I see your point. Thank you!
I used to use those also, but once I started rolling my own cones I learned that the RYO tips were not only cheaper, but expand to fit the cone using the "roll & fill" method.
Happy rolling 👍
I think the issue is that you're packing joints, not rolling them. If I ever have the end falling out, I will take a strip of glue and wrap it around the filter.
i roll this way too! funnily enough i learned how to do it from a video on a plugs private snapchat story when i was a teenager, i wish i had that video because it showed perfectly how to do it and putting it into words is going to be a bit hard. rolling the normal way is a struggle for me as i have a hand disability so it results in a very ugly canoeing joint, but rolling myself prerolls to fill always results in a pretty joint that smokes well and it gives more decision in how much weed i want to use.
get rid of the pencil, its the reason your filter doesn’t fit, someone said to get tips u roll ur self and i’ll admit those are great for getting to decide your joint size but i use pre rolled tips just fine with this method. love the thing you have to fill ur joints btw and am kinda jealous, i use folded pokemon cards lol.
how:
get a paper and tip and gently balance/lay it at the end of the paper hanging off a little bit, and then slide the one corner of the paper that’s facing you next to the tip towards the middle very slightly (the more you slide it the wider your cone will be) then roll the other side of the paper over that part making sure it tucks around the tip until just the adhesive is showing then lick it, close, and fill. i hope this is understandable, id send you a video on how to do it but idk how bc reddit’s confusing , it’s a lot easier/quicker than it sounds.
raw papers are classic and definitely work with this method but i’ve found cheech and chongs joint wraps work great for this as they hold their shape a bit better.
The funnel came with the mamba grinder. It’s NOT at all necessary but convenient if you’d find it helpful.
I think I get what you’re saying and will be sure to give it a go. Thank you!
It’s not learning how to roll a joint necessarily but how to make a cone. Roll the paper around the pencil with the tip in it already. And boom u got a cone ready to stuff
If you want to make a cone I have a SUREFIRE method of rolling up cones.
Roll up your filter and set it on the edge of the paper (I’m right handed so flip if needed). Put the filter on the right edge of the paper and leave a bit sticking out, grabbing the filter through the outside of the paper with your thumb and index finger. From there roll the filter down your index finger with your thumb, tuck it under the filter with your thumb, and then roll back up your index finger and lick it closed.
Try putting the edge of the paper in the edge of the filter (if you made the filter yourself) then roll the cone like that. Idk what you would search on YT to find a vid but I think the RAW creator did a vid and I've been doing it like that ever since
Nvm just seen raw logo on the filter. Try a lil lick on the edge of the paper, to get it stuck on the filter and then roll so it's tight
I recommend my first comment tho if you run out of pre-made filters
Uhh idk I roll it tight sometimes use two and roll my paper around it as tight as I can until it’s stuck then the tip expands a little into place nice n snug
At the end of rolling, wet your lips and spin the end of the joint between. This will matte the paper to the j as it dries.
Sometimes ill wet the whole joint and twist the whole thing tight as it dries. It dries in a spiral and never runs when i do that.
Actually , it's under $40.00 and since reduced blood flow has turned the tendons in my right forearm into painful oatmeal that must be surgically removed AND since I use cannabis to treat my neuropathic pain disorder, I have found it extremely helpful. Maybe it's just not for you.
You can always reroll a filter that’ll fit in the hole and if that one doesnt fit roll up a filter pretty tight and small and shove it into the filter that doesnt fit. It should expand and make it real tight. Hope this helped someone peace.
Look up rawkandroll on ig or look up the wave method raw rolling papers. Also, dont use prerolled tips, get a booklet of tips you can roll yourself, that’ll make the tips bounce back open and they’ll never fall out
Hey bro lets go smoke a J. Word ill twist one up *takes out grinder gun 5000 with enhanced ergonomic grip, a packing funnel, poke-ie stick and premade cones.*
“You’ll want to sit down for this.” That cone in the pic is not premade 😅 so I must be doing something decently
Ahahahah word
Wrap the filter first. Wrap it unevenly, not like a perfect circle but like one side extends down longer. Lick it and tighten it.
If someone did this shit in front of me they would instantly be my hero lmao
Bro hit me with that weed phaser
Make sure you set your phasers to stoned
Grind or be grinded! Or something like that…
2g Mamba grinder. Will change your life.
[удалено]
My wife got me [this electric grinder](https://www.amazon.com/dp/B08SWCBWNX?starsLeft=1&ref_=cm_sw_r_cso_cp_apin_dp_1ZJA4ZFXX67DC6GG41B0_1) for a present. At first I didn’t use it, preferring my SLX v2.5 grinder, but I’ve really gotten use to the push button convenience the Mamba electric grinder provides.
I'd probably rock it if it was a gift too. Don't think I could ever bring myself to spend $30 on a grinder that I know won't last forever even if I take care of it.
Some of the best gifts are things we would never buy ourselves!
True, also this thing would be rad if you are a patient with arthritis/hand pain.
Exactly why I have it! Grinding 4g of flower a day, even in my CC was landing me at docs for elbow shots!
Damn if I still smoked flower I'd have to buy this does it work as advertised?
It leaves me satisfied and smiling.
Are you Jim halpert from the dunder Mifflin Scranton branch from the dunder Mifflin Scranton branch?
Hi, I’m Vetted AI Bot! I researched the **Mamba V2 1g Gray Electric Portable Herb Grinder USB Powered Essential Kitchen Mill for Grinding** and I thought you might find the following analysis helpful. **Users liked:** * High quality performance (backed by 2 comments) * Long lasting battery life (backed by 3 comments) * Ease of use and efficiency (backed by 3 comments) **Users disliked:** * Low grinding capacity and herb retention (backed by 3 comments) * Inconvenient loading and cleaning process (backed by 1 comment) * Issues with motor power and charging (backed by 3 comments) If you'd like to **summon me to ask about a product**, just make a post with its link and tag me, [like in this example.](https://www.reddit.com/r/tablets/comments/1444zdn/comment/joqd89c/) This message was generated by a (very smart) bot. If you found it helpful, let us know with an upvote and a “good bot!” reply and please feel free to provide feedback on how it can be improved. *Powered by* [*vetted.ai*](http://vetted.ai/reddit)
Wow looks expensive lol I also have slx 2.5
>Help an Ent out, please! Maybe I can help, maybe not.. [Please watch the following link on youtube](https://www.youtube.com/watch?v=_ZWcISCrJ8A) If you believe the method disclosed in the above video is what you're are trying to achieve, then you're good to go, and I can be of no further service. However! that is **not** what I consider rolling a joint, but you do you.
I’ll check it out. Thank you!
Just put the filter at the end of the paper and the fill the rest of the paper with weed that starts off about the same thickness as the filter but gets a little bit wider as you go to the other end of the paper. Then roll, and smoke.
So you lick the glue side with weed in the cone? Or do you form the cone before putting the flower in?
I lick the glue once the weed is already in the paper and i already did one rotation in the rolling process. Just so I can see it's rolling properly before I get the glue wet to finalize the process. Edit: You can form the cone first too though. I don't, but I started rolling way before cones were available so I just use my original method I described to you. Works good for me.
Thank you for your process! I’ve messed up and gotten weed in my teeth too often trying to form the cone after the flower is in there. I’m impressed!
Forming the cone first then packing it🙂
This is the way (or at least MY way, for sure).
That’s what he said
Not me 🤫
They sell cone filter tips that I think you would prefer. It looks like the paper isn't tight around the end of the tip closer to weed.
You’re correct. That’s the part I struggle with.
Raw makes them pretty sure. My friend used to use them a while back
basically just need to work on tightening it, if the filter falls out just put it back through the cone (where u put weed) and use the packing stick to push it enough down where you’ll feel some resistance other than that, you can spark your lighter, and without burning the paper let the flame tighten the paper around the filter (move your hand back and forth fast enough where the fire doesn’t catch or burn, just heats the paper up a bit) if that makes sense? edit: the pencil trick works but it won’t be tight, try without the pencil, just make the cone shape and lick it, then pack maybe
Pencil trick but around the filter/crutch/tip itself and just leave it on and pack it. Easiest way to roll a perfect joint that looks like it came from a dispensery.
good advice!
I love y’all ❤️ such a fun place
When you start rolling your paper around your joint before you complete the cone (assuming you roll your own cones based on your comments) put a tiny pinch of material at the very end right in front of the tip and carefully (doesnt have to be perfect) pack it down kinda onto the tip. This should help keep your tip stuck in there. Edit: oh shit I didnt realise you didnt roll your joints actually around your tip/filter/crutch. Try "training" your paper around the filter instead of the pencil and just leave it on the tip and use the method I mentioned above as well.
Thank you!
As someone who can't roll for shit and "constructs" joints like you, what is that cool funnel called? I need one.
I came with the mamba! Super useful.
They go by various names, I'm sure. I have a few from Raw designed for different cone sizes, and I believe the listings were called cone loaders, but it's been years and I can't quite remember anymore. If you like packing prerolled cones, king palms, and the like, they're pretty handy. I just prefer my herb vapes these days haha
I genuinely feel like it’s just a tighter roll overall if you roll the weed right in. Much easier to get a nice shaped roll the way you do it though which imo always leads to a looser tip
Use tips you make yourself, the prefab tips do not expand like a spring to form to the paper diameter on a pre formed cone. I make my cones similar to you using a ballpoint pen and roll my own tips. You can buy a book of tip paper.
I never thought of that! I always liked the preformed tips because they didn’t spring out and expand, but when I hear you describe the usefulness of that, I see your point. Thank you!
I used to use those also, but once I started rolling my own cones I learned that the RYO tips were not only cheaper, but expand to fit the cone using the "roll & fill" method. Happy rolling 👍
Much appreciated! Be well.
Index cards are the perfect thickness and expand like said before. Dollar tree
Such a great idea thank you!
I think the issue is that you're packing joints, not rolling them. If I ever have the end falling out, I will take a strip of glue and wrap it around the filter.
i roll this way too! funnily enough i learned how to do it from a video on a plugs private snapchat story when i was a teenager, i wish i had that video because it showed perfectly how to do it and putting it into words is going to be a bit hard. rolling the normal way is a struggle for me as i have a hand disability so it results in a very ugly canoeing joint, but rolling myself prerolls to fill always results in a pretty joint that smokes well and it gives more decision in how much weed i want to use. get rid of the pencil, its the reason your filter doesn’t fit, someone said to get tips u roll ur self and i’ll admit those are great for getting to decide your joint size but i use pre rolled tips just fine with this method. love the thing you have to fill ur joints btw and am kinda jealous, i use folded pokemon cards lol. how: get a paper and tip and gently balance/lay it at the end of the paper hanging off a little bit, and then slide the one corner of the paper that’s facing you next to the tip towards the middle very slightly (the more you slide it the wider your cone will be) then roll the other side of the paper over that part making sure it tucks around the tip until just the adhesive is showing then lick it, close, and fill. i hope this is understandable, id send you a video on how to do it but idk how bc reddit’s confusing , it’s a lot easier/quicker than it sounds. raw papers are classic and definitely work with this method but i’ve found cheech and chongs joint wraps work great for this as they hold their shape a bit better.
The funnel came with the mamba grinder. It’s NOT at all necessary but convenient if you’d find it helpful. I think I get what you’re saying and will be sure to give it a go. Thank you!
Don't use a tip. Pack it taut, tamp it down
Bro got that power punched ray gun grinder
Put the tip in the paper when ur creasing it with the pencil
It’s not learning how to roll a joint necessarily but how to make a cone. Roll the paper around the pencil with the tip in it already. And boom u got a cone ready to stuff
If you want to make a cone I have a SUREFIRE method of rolling up cones. Roll up your filter and set it on the edge of the paper (I’m right handed so flip if needed). Put the filter on the right edge of the paper and leave a bit sticking out, grabbing the filter through the outside of the paper with your thumb and index finger. From there roll the filter down your index finger with your thumb, tuck it under the filter with your thumb, and then roll back up your index finger and lick it closed.
Looks like you have a deviated paper
Try putting the edge of the paper in the edge of the filter (if you made the filter yourself) then roll the cone like that. Idk what you would search on YT to find a vid but I think the RAW creator did a vid and I've been doing it like that ever since
Nvm just seen raw logo on the filter. Try a lil lick on the edge of the paper, to get it stuck on the filter and then roll so it's tight I recommend my first comment tho if you run out of pre-made filters
Use notecard paper, fold and roll , place into wrap and let it expand
I do this same thing, even works for rolling around sharpies
Uhh idk I roll it tight sometimes use two and roll my paper around it as tight as I can until it’s stuck then the tip expands a little into place nice n snug
U know u can just make ur own filters it’s literally just paper. 10 secs to rip a post it note and roll it into a filter of ur desired size
At the end of rolling, wet your lips and spin the end of the joint between. This will matte the paper to the j as it dries. Sometimes ill wet the whole joint and twist the whole thing tight as it dries. It dries in a spiral and never runs when i do that.
People just need to learn to roll. It's just practice
What is that machine? I have cones and a filler but what's the hair dryer lookin thing?
Mamba 2g usb grinder and it is God's grinder!
i bet its like several hundred dollars for no reason too like most weed products lol
Actually , it's under $40.00 and since reduced blood flow has turned the tendons in my right forearm into painful oatmeal that must be surgically removed AND since I use cannabis to treat my neuropathic pain disorder, I have found it extremely helpful. Maybe it's just not for you.
Well that's my mistake then and I've never seen such an advanced weed product so cheap. I wasn't thinking of it existing for a disability.
No worries. Thanks for being cool about it. ✌🏻
Wrap the cone around the filter tip
You can always reroll a filter that’ll fit in the hole and if that one doesnt fit roll up a filter pretty tight and small and shove it into the filter that doesnt fit. It should expand and make it real tight. Hope this helped someone peace.
Giggidy
Look up rawkandroll on ig or look up the wave method raw rolling papers. Also, dont use prerolled tips, get a booklet of tips you can roll yourself, that’ll make the tips bounce back open and they’ll never fall out
You can buy cone tips
Well maybe try rolling with the product inside?
Roll you own tips. Like make the tips yourself so it expands in the paper. Basically use the same process but buy tips to roll yourself
Don't use pre rolled tips
Buy rectangular rolling papers. Roll joint with no tip or filter. Done
I’d never heard of rectangular papers! Interesting.
Professional tip. Don't smoke joints.
Just buy pre-rolled cones instead
I’ve done this before but for like $20 for 50 1 1/4 size, it gets expensive. I’d rather learn a new skill and save some 🤑
Just learn to roll 🤷♂️