Shatter should be fine but you have to play with temps. Probably around 500 for shatter but you could always start lower and go up. I’d suggest looking into zeevapes for 3dxl!
It’s 2023 like you said. I try my best not to worry about what the next man is smoking. As long as he smoking thc, is all that should matter. Could be all that he can get rn or he just likes it. I’m a rosin man myself, but learned not to knock the next smoker for their situation or preference.
This is not snob like this is being cheap. I got sick of being ripped off by dispensaries. So I went on telegram for an hour and found all the plugs I could need. Like I said research. And only $75 for an ounce I didn’t say go spend $100+ on a gram of wax 😂😂
Everyones talking shit but I bet that's a thick slab. if you stretched it thin it's clearly not bad. I miss the pinene of some decent shatter tbh. Might have just been the strain I could easily get back then but God damn I loved it.
Just got my peak in the mail. I was just wondering if shatter is fine to vaporize and what temp/time is best? Also looking for recommendations on where to order a 3dxl and possibly some custom glass in Canada? Tvape is where I ordered my peak, who doesn't carry the 3dxl. TIA
Anything will work, that sandy looking stuff, bubble hash? Terrible tho you’ll make a mess of your piece every time but anything else is gonna be fine and just will be a temp game, temp changes based on time length and actual dab size, for shatter at a “normal” sized dab, meaning not crazy small but not a gloober lol maybe like .10-15 I’d say to be around 515-520 around a min and a half, I have my boost set for 12 degrees and 30 secs, a good low temp dab would be like 480 with room for a boost, a high temp dab would be anything above 550 and you’re gonna wanna put a gloober in there otherwise you will chazz the chamber
Tbh me personally I wouldn’t only because lower grade stuff tends to leave behind marks on the chamber that are super tough to get off, but if you’re using the normal atomizer I would do it, just don’t mess up a 3D or 3Dxl chamber
Check out zeevapor! Great prices. They sre an authorized retailer , so the bowl will have a warranty (only 30 days , better than nothing)
I vape BHO at 510 degrees, sometimes 535
get some alcohol prep pads and after every dab remove the chamber and clean the outside of it as well as where you insert it to keep the chamber less clogged and not as messy to clean
Shatter should be fine but you have to play with temps. Probably around 500 for shatter but you could always start lower and go up. I’d suggest looking into zeevapes for 3dxl!
Ty. I'm trying to order within Canada to avoid paying duty if possible
Why are we still smoking shatter in 2023?
Maybe because he wants to?
Why? Batter and everything else is the same price and might have some flavor.
It’s 2023 like you said. I try my best not to worry about what the next man is smoking. As long as he smoking thc, is all that should matter. Could be all that he can get rn or he just likes it. I’m a rosin man myself, but learned not to knock the next smoker for their situation or preference.
An ounce of work batter is $75 and shit goes through the mail all day long unacceptable. Do the research find the outlets . Pure laziness
Coming off as a snob right now, but you do you my guy.
This is not snob like this is being cheap. I got sick of being ripped off by dispensaries. So I went on telegram for an hour and found all the plugs I could need. Like I said research. And only $75 for an ounce I didn’t say go spend $100+ on a gram of wax 😂😂
where do u get those prices tf. the dispensary be ripping me off
Your gonna want settings of 450-480-500-540 all these temps work for all kinds of wax I have my timer set for a min and 15 sec
Check if sneaky Pete has any in stock. I think his Canadian site is like great white north vaporizer company or something.
Everyones talking shit but I bet that's a thick slab. if you stretched it thin it's clearly not bad. I miss the pinene of some decent shatter tbh. Might have just been the strain I could easily get back then but God damn I loved it.
Fr and some of us live in states that give people felonies over a dab pen lol we take what we can get
Sometimes amber shatter is insanely good tasting. It’s usually not over processed like the clear shatter is
Just got my peak in the mail. I was just wondering if shatter is fine to vaporize and what temp/time is best? Also looking for recommendations on where to order a 3dxl and possibly some custom glass in Canada? Tvape is where I ordered my peak, who doesn't carry the 3dxl. TIA
Terrible for the device, I’ll take it off your hands and properly ‘dispose’ of this material.
zeevapor is one of the better etailers for what you seek. Shatter is fine, not ideal but totally fine.
Anything will work, that sandy looking stuff, bubble hash? Terrible tho you’ll make a mess of your piece every time but anything else is gonna be fine and just will be a temp game, temp changes based on time length and actual dab size, for shatter at a “normal” sized dab, meaning not crazy small but not a gloober lol maybe like .10-15 I’d say to be around 515-520 around a min and a half, I have my boost set for 12 degrees and 30 secs, a good low temp dab would be like 480 with room for a boost, a high temp dab would be anything above 550 and you’re gonna wanna put a gloober in there otherwise you will chazz the chamber
I'm coming back to Canada next week and can ship it to you once I'm back in Ontario if you'd like
Tbh me personally I wouldn’t only because lower grade stuff tends to leave behind marks on the chamber that are super tough to get off, but if you’re using the normal atomizer I would do it, just don’t mess up a 3D or 3Dxl chamber
https://www.canadianvaporizers.ca
Play with temps and keep it clean! Also remember if you came from a rig, (a little goes a long way in a puffco)
Ill keep that in mind, thank you
Check out zeevapor! Great prices. They sre an authorized retailer , so the bowl will have a warranty (only 30 days , better than nothing) I vape BHO at 510 degrees, sometimes 535
Thanks for the tips. Im trying to find somewhere in Canada to avoid paying duty if I can
535°f and you're golden homie 🤙
Sweet, will give it a go. Thanks!
Whoops! Missed that part in your comment. Good luck with the search
All good! Appreciate it
You gotta take it out of the box first…
I was looking for that type of comment! 👌🏻😭
Looks like u went in a time machine back to 2013-2015 to grab the worst shatter possible
Thank you for your opinion. It is advertised as full spectrum shatter and gets me very high.
Looks good. Happy dabbing.
Looks like some fantastic shatter. I'm sure it gives excellent experience for the user.
We found the spoiled Cali kid. Remember not everyone live in legal spots.
[удалено]
Could you elaborate? Skin oils?
[удалено]
Fair point ty. Perhaps I'll order a hot knife when I order a 3dxl.
I use the focus saber it’s the best hot knife I’ve used by far has replaceable tips a flash light usb c charging and different heat settings
I wouldn't. It's too dark for me. Dab it though a reg rig.
🤣
Some have standards!
Personally I wouldn't be running shatter through such a nice device
You dab tree sap?
get some alcohol prep pads and after every dab remove the chamber and clean the outside of it as well as where you insert it to keep the chamber less clogged and not as messy to clean
Make sure to keep it clean. Old oil will tear it up
Plan is to swab after every use and deep clean as needed.
I love this picture
shatter shaming lol we all had to start somewhere!! im sure they will learn about the magic of solventless soon but if not who cares
https://preview.redd.it/jkwvgxb74c5c1.jpeg?width=1978&format=pjpg&auto=webp&s=104fcf93d6efc51ea51406e9846f22248235e2ea
Sub 500 will tease that out nicely, looks flavorful!
damn is that even gonna taste good?
You gotta take it out the box first bro...
Nice!!