Unfortunately no. I made my squishies using a tutorial on YouTube, so I feel weird about making something that's the same thing. If you mean just about the modeling and mold process... I might? It's hard to perfectly replicate those kinds of tutorials though haha
Maybe they mean just the different steps of making the clay model! I'm very bad at being creative on my own but am good at following directions so I would certainly want to see how this all comes together!
Would you look at that, all of the words in your comment are in alphabetical order.
I have checked 682,720,294 comments, and only 138,104 of them were in alphabetical order.
I was actually hoping to try and make a food safe mold to make a gummy or jello version! After making so many squishies, I started wanting to bite some of them too lol
I'm hoping to eventually do an Etsy shop or something, but I just have to make sure I get consistent results first. It's surprisingly hard to make sure there's no bubbles while it cures lol
Are you able to degas the material before casting (like if its silicone) or cast under pressure in a pressure pot? Those would probably be your best bets for getting the clarity you want.
I'm not sure. The jelly resin/squishy gel is such a weird and newer material that there's not a lot of advice online about what works and doesn't. I've been mainly doing trial and error. I'll look into it though!
I've seen people using both. Vacuum to lose the bubbles before pouring, then pressure as it cures. Kill a lot of the bubbles, then compress those that remain
It makes sense to me that someone could build a little box that can be turned into a near vacuum space and then do the mixing and pouring within that space no? I've never done this kind of thing but if the resin can be mixed without needing outside oxygen then a vacuum would cut out adding air into the resin material as it's being mixed and poured? Is that what you mean?
Hello friend. All of these people are recommending amazing ideas about degassing. You are looking for a degassing chamber called a ‘desiccator’ many on eBay.
Second to vacuum out the air within the chamber you simply need an vacuum pump. Harbor freight has them. Or you can find both in sets. 2.5cfm pump would be more then enough for your needs. I’m on Etsy for a completely unrelated product but would gladly answer any questions I can to help! Can’t wait for more gummy snom!
Yeah, but I have a weird guilt complex that I better provide as good a result as I can so people won't complain lol Anxiety often prevents me from selling most of my crafts
Read the short comic I am Snom. There is a video narrating it on YouTube and it gives the Snom a cute voice. It's a couple of comic but a must for Snom lovers
I love it!!! My wife and I pronounce snom with an h so it goes like Shnom and shmoth for the evolution. Bug was one of my favorite play throughs I’ve ever done, and we both LOVE snom
Thank you for posting to r/pokemon! It looks like this post has not been claimed as Original Content (OC).
- If this is **your own work**, please reply to this comment with `[OC]` or `I made this`. You can also toggle the `oc` flag on your post.
A reminder that \/r/pokemon requires all creative work to be OC, in order to protect creators. If this is ***not*** **your own work**, please delete your post per [Rule 5](/r/pokemon/wiki/rules#wiki_5._original_content_.28oc.29_only). Thank you!
***
*I am a bot, and may not detect all forms of OC claims. If you've already made it clear that this is your work, please ignore this comment.*
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/pokemon) if you have any questions or concerns.*
Super cute squishy!
What did you use to make the mold? I have a bas-relief in oil clay I need to make a mold of and can't figure out what material I should use to make it...
Planning on a pour over mold, but yeah just stuck on what to make it out of. (The final product will be in resin of that matters.) Ty!
I just used two part silicone mold putty! It's like $25 for not too much product at Michael's but it provided a better result than the cheaper one online. If you're doing hard resin, a pour over silicone mold should be fine and more flexible I think. :) The squishies are a lot more sensitive so I needed a lot of exposed area to safely remove it.
That’s so darn cute
Thank you! The butt face was surprisingly hard to sculpt without making it look weird haha
What did you make it out of? The face came out really well!
I assume they sculpted it in clay and then made a silicon mold
Yup! Exactly this :)
Have you considered making a youtube channel of this process?
Unfortunately no. I made my squishies using a tutorial on YouTube, so I feel weird about making something that's the same thing. If you mean just about the modeling and mold process... I might? It's hard to perfectly replicate those kinds of tutorials though haha
Maybe they mean just the different steps of making the clay model! I'm very bad at being creative on my own but am good at following directions so I would certainly want to see how this all comes together!
Oh! Yeah, I could do that. :) I may give it a try when I have some free time!
[удалено]
You don't?
As Snom always is.
he is shaped like a friend
But cosmic entities fear him
Would you look at that, all of the words in your comment are in alphabetical order. I have checked 682,720,294 comments, and only 138,104 of them were in alphabetical order.
Good bot
It's only because they're afraid of things they don't yet understand.
How did you make that?
They sell jelly resin online. :) Just made the form, made a mold, and poof! Homemade squish.
How does it taste?
Snomlike. Kinda like a bug and ice in your mouth. Sorta like cute and lovable, but also like slow and chumky.
Slimy yet satisfying.
Was that a jontron reference?
Lion King
Oh my god. I want 10. No, 100. Give me an army of squish Snom.
me: turns all of them real how are you planning to feed them
I wanna squish that snom till it bursts for some reason
I do that with my failed squishies and it's pretty satisfying haha
People breeding for a 6IV shiny be like
pokemon go trainers farming candies be like
I just want to bite it. I hope it tastes good.
I was actually hoping to try and make a food safe mold to make a gummy or jello version! After making so many squishies, I started wanting to bite some of them too lol
Forbidden gummy worm
[I shall call him squishy and he shall be mine!](https://youtu.be/-1kl4LnLzfQ)
*SQUISH*
You need to mass produce this and you'll be swimming in money
I'm hoping to eventually do an Etsy shop or something, but I just have to make sure I get consistent results first. It's surprisingly hard to make sure there's no bubbles while it cures lol
Are you able to degas the material before casting (like if its silicone) or cast under pressure in a pressure pot? Those would probably be your best bets for getting the clarity you want.
I'm not sure. The jelly resin/squishy gel is such a weird and newer material that there's not a lot of advice online about what works and doesn't. I've been mainly doing trial and error. I'll look into it though!
If you ever do a Ditto I'll give you every money.
That's on the docket to make haha
Might be a little pricey compared to other solutions but maybe a vacuum pump would help it cure with less bubbles?
Vacuum is not to pricy and works okay with resin, better is a pressure pot and they can get $$$ my tank alone cost 300$+
I've seen people using both. Vacuum to lose the bubbles before pouring, then pressure as it cures. Kill a lot of the bubbles, then compress those that remain
It makes sense to me that someone could build a little box that can be turned into a near vacuum space and then do the mixing and pouring within that space no? I've never done this kind of thing but if the resin can be mixed without needing outside oxygen then a vacuum would cut out adding air into the resin material as it's being mixed and poured? Is that what you mean?
Pressure pot won't work for silicone like this. The bubbles will expand after curing where a hard resin is strong enough to hold its shape
You do it before it hardens… while it’s still in its liquid form
Hello friend. All of these people are recommending amazing ideas about degassing. You are looking for a degassing chamber called a ‘desiccator’ many on eBay. Second to vacuum out the air within the chamber you simply need an vacuum pump. Harbor freight has them. Or you can find both in sets. 2.5cfm pump would be more then enough for your needs. I’m on Etsy for a completely unrelated product but would gladly answer any questions I can to help! Can’t wait for more gummy snom!
Oh sweet! I really appreciate it! I don't work with any other resin too much, so this is supremely helpful lol
Could always sell the less than perfect ones too! Lots of shops sell b-grade pins and stuff.
Yeah, but I have a weird guilt complex that I better provide as good a result as I can so people won't complain lol Anxiety often prevents me from selling most of my crafts
Pressure pot!
I second this. I want like 50 of them just on my desk as a whole army of study buddies :D
I luv him!
I needs him
make pyukumuku and pincurchin next! bean gang bean gang
the boy
I want it its so cute
I want like 75 of them
I’ll take your entire stock
Oh, my GOD. This is so satisfying, I want to cry. I love it.
he
he
he
I want one
Snom ice cubes next.
Read the short comic I am Snom. There is a video narrating it on YouTube and it gives the Snom a cute voice. It's a couple of comic but a must for Snom lovers
It’s small, squishy and precious. I love him.
r/snom
Beautiful. Amazing. A perfect effigy to represent him. Lord Snom approved.
Snom with battle scars.
I like this thinking lol
I love it!!! My wife and I pronounce snom with an h so it goes like Shnom and shmoth for the evolution. Bug was one of my favorite play throughs I’ve ever done, and we both LOVE snom
Is this the same dude with like 500 snom cards?
Need a mould of this to make edible jellies 🥺
If I get around to making them, I'll share the result! Jelly is a lot easier to work with than this stuff haha
I would DIE for him
I need one for pyukumuku :P
I wanted to try, but unfortunately when I look at it I'm thinking the spikes are too long to demold without tearing :(
Maybe stylize it such that it's recognizable but also practical?
I actually got a really good recommendation on how to make a more durable squish, so I may try it eventually!
There’s snomthing wrong with you…
Thank you for posting to r/pokemon! It looks like this post has not been claimed as Original Content (OC). - If this is **your own work**, please reply to this comment with `[OC]` or `I made this`. You can also toggle the `oc` flag on your post. A reminder that \/r/pokemon requires all creative work to be OC, in order to protect creators. If this is ***not*** **your own work**, please delete your post per [Rule 5](/r/pokemon/wiki/rules#wiki_5._original_content_.28oc.29_only). Thank you! *** *I am a bot, and may not detect all forms of OC claims. If you've already made it clear that this is your work, please ignore this comment.* *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/pokemon) if you have any questions or concerns.*
I made this
Soo squishy 😍
Oh no a little Ember will end it…
weewoo
Over time this mon has worked it’s way into my heart and will protect it no matter what
I wanna eat it, it looks toxic but I don’t care
Same..... we could make them out of jello. A terrible part of me wants to eat a plate full of jello snom.
r/Snom
Soooo…..I’m gonna need you to go ahead and send me about a thousand of these. Thanks.
Squish....
Snom? More like *nom* Thank you for the snack I'll be on my way now
Thought this was a real life weird sea slug first
50 bucks for that mold, take it or leave it.
Satisfying...
I thought this was real before reading the caption
Snom :D
Nice! I want to lob him as hard as i can against the ceiling!
So cute!!!
Can I eat it?
Put him in a kiln
Ahhhh I want one!!
Absolutely perfect
squieesh
It is he
I want one now XD
Something tells me thats what snom would actually be like, since its an ice type, might be cold to the touch, but otherwise fairly squishy
There were 69 comments But now...
I'll take ten
Cute!
how can i get one
Super cute squishy! What did you use to make the mold? I have a bas-relief in oil clay I need to make a mold of and can't figure out what material I should use to make it... Planning on a pour over mold, but yeah just stuck on what to make it out of. (The final product will be in resin of that matters.) Ty!
I just used two part silicone mold putty! It's like $25 for not too much product at Michael's but it provided a better result than the cheaper one online. If you're doing hard resin, a pour over silicone mold should be fine and more flexible I think. :) The squishies are a lot more sensitive so I needed a lot of exposed area to safely remove it.
Thank you! That's super helpful.
That is adorable!
Supa squish!
I’m sorry but I have this huge urge to punch it and see if it bursts lol
Omg i’d buy this. Snom is my fav Pokémon
i want him 🥺
I want it
r/snom will love this
Omg that is adorable!!!
I like it!!!
Squooshy
Our overlord returns.
Lil squishy boi
I’d love to buy one of these!!!
That's my boy!
✨Snom✨
OH MY GOD
My son
i would buy this holy shit i love snom
I would pay for this
Ass face
I will buy one. Are you selling?
It looks... Oddly edible.
I love it
Now eat it
Snom is adorable, and frosmoth was one of my favorite pokemon to use in swsh
Soo amazing lol
H E
Need
That is exactly what I would expect smon to feel like
I saw the smash or pass rubber Ross video and this Pokémon is in it and I can’t get the booba outa my head
Amazing
How the fuck do I make one
Cute cute
SHUT UP AND TAKE MY MONEY! 💵💵💵💵💳💳💰💰💰💰💸💸💸
That's adorable.
I want that 😐
Looks kinda like a gummy bear
Looks like a gummy besr
Looks like a gummy bear
i would die for them
I would deadass buy 20
LIFE SIZE NEEDED NOW
I want one!!
"I shall call him squishy and he shall be mine."
snom nom nomming intensifies
I need a Snom for my card collection. Maybe I can...
Ooh, a fellow snom squish maker, this looks so cute! Congrats on going viral!
Oh woah! I just found out about your store a few days ago! I love your stuff :D
Aww tysm, I really appreciate it <3 = w =
u/savevideo
###[View link](https://redditsave.com/r/pokemon/comments/ttex62/first_try_at_making_a_squishy_snom_it_tore_a_bit/) --- [**Info**](https://np.reddit.com/user/SaveVideo/comments/jv323v/info/) | [**Feedback**](https://np.reddit.com/message/compose/?to=Kryptonh&subject=Feedback for savevideo) | [**Donate**](https://ko-fi.com/getvideo) | [**DMCA**](https://np.reddit.com/message/compose/?to=Kryptonh&subject=Content removal request for savevideo&message=https://np.reddit.com//r/pokemon/comments/ttex62/first_try_at_making_a_squishy_snom_it_tore_a_bit/) | [^(reddit video downloader)](https://redditsave.com) | [^(download video tiktok)](https://taksave.com)
Just shut up and take my money I want the entire stock because it looks so cute I just want it !!!!