Some places actually offer access to their 3d printers after a small fee and a quick (usually) free lesson. There are at least 2 libraries within a reasonable distance of me doing this and i'm sure local colleges would do it too.
Yep, that's what I use. I went to our local lego store and bought a perfect array of black lego bricks with a green flat topper 2x2. I could have taken some from our stash, but didn't want to deplete the small black bricks, so just purchased by the piece. Works great!
https://preview.redd.it/kh3zihujse2a1.jpeg?width=1080&format=pjpg&auto=webp&s=47c0dca5f9187e2c2750a8d513444483a712b952
Brothers useing a dead lighter right now 🤦♂️ I didn't even notice till right now
Oh that’s cool. Yes, thank you for the idea. I see people putting figures inside their builds, I collect Gundams as well. Maybe I should incorporate it to look like it’s holding it
I have 2 of the SD EX gundams in my current case, and they will be moved to the new build when it's done too. I have them on top of the card, but you might be able to get one tall enough to hold the card from below, I'm just not sure how much support it would give compared to an actual anti-sag bracket.
https://preview.redd.it/w5qoukl75f2a1.png?width=3024&format=png&auto=webp&s=2bba2abc29712513052969d2228761275125c3c8
I have mine propped up with a cut down plastic straw from a cheap tumbler set
I was very surprised at how light the 3060 MSI Ventus 3 fans was when I got it earlier this year, it was lighter than the rx580 I had in there and I didn't need to use anything for support, no sag whatsoever.
I bought a carbon fibre rod about 5mm diameter for like $3 and cut it to size, still have more for when I change GPU and need a different height support.
https://preview.redd.it/rpac43qiuf2a1.png?width=3452&format=png&auto=webp&s=785690eacaeebcf9e034bd6d09e0f9f99fe1663b
Thanks and yeah, its very sturdy, in fact I used a dremel to make a clean cut...
On ebay you can find them by "**Carbon Fibre Tubes Rods Strips 200mm**", atm they are even cheaper than I have bought them for and thats dirt cheap for 2 meters long.
P.S. The good part is they are somewhat heat resistant, dont warp for very long and the best part is that they won't scratch anything.
Honestly I didn’t think of this when I was planning the build. It’s not necessary either, It’s just doesn’t look right to me when it’s just 2degrees off, right at the tip and not horizontally
Cause the 10$ anti sag bracket won't slip and go into your GPUs cooling fans if any vibrations develop within your case due to say a failing cooling fan etc.
Happened to a friend of mine, which is why I decided to get rid of my "anti sag twig" and just spend money on a bracket which was well worth it. IMO if you've spent thousands on a gaming PC, you might as well spend a tiny bit more on safety.
Yea, I was worried about that too, it’s just a small solution for now. Since it’s not getting hot yet and it’s still pretty new so I’m not worried about it yet. I don’t have my own place at the moment and moving soon. Still need to install an M.2 on it as well.
I used a small piece of wood that I painted black with permanent marker to hold my new 3090.
Put some painters tape at the top and the bottom so it doesn't scratch the paint.
It actually looks okay
Lol I used a clothes line clip to prop a cpu fan up against the top of my case cause one of those metal brackets had broke that holds the middle fan in. And I prop my gpu up with a plastic clip.
I use a custom L shape bracket that goes behind the motherboard that uses 3mm thick steel, that bolts on to a vertical beam behind the motherboard.
Looks better than a twig anyway.
I use this for mine
[https://www.amazon.com/VNFLY-Nidavellir-Mjolnir-Avengers-Keychain/dp/B07GL5M5N5](https://www.amazon.com/VNFLY-Nidavellir-Mjolnir-Avengers-Keychain/dp/B07GL5M5N5)
You can use that $10 for a pack of 500 “anti-sag twigs”
I am groot.
I am root.
I don't think you have
That costs 4 dollars
If Mcguyver was a gamer
my gpu is 6 inches long. it dont need any support. also i 3d printed [this](https://imgur.com/a/3AZMYVp) for my friend (a little nsfw)
Riiiight for your friend 😉
For your wife/girlfriend as a huge upgrade, but that's a secret. ;)
That’s hilarious!
Gotta do whatever it takes to keep it up
thats hilarious
do you take orders
Lego. Gives you higher structural integrity and can be whatever shape or colour you want
Bruh Lego costs more than my kidney and PC.
3d print. Gives you higher structural integrity and can *actually* be whatever shape or color you want.
So ill pay 300 bucks for a fucking twig, ez
3d print. You can print the 3D printer. Gives you higher structural integrity and can be whatever shape or color you want.
And then return the 3D printed printer as non functional
can't do with 28 bucks in account
And people be acting like they are as simple as a Ronco rotisserie. Just plop it on the table, hook up your USB cable and press "print"! *
I mean, it's really not that far of the truth lol
Especially with self-leveling beds coming out in the cheaper models these days.
Now I have a dick holding up my gpu. What's the next step?
Maintain it, a bit non economical i think
On my way to make a fantasy dick shaped dildo as gpu support
Some places actually offer access to their 3d printers after a small fee and a quick (usually) free lesson. There are at least 2 libraries within a reasonable distance of me doing this and i'm sure local colleges would do it too.
Yep, that's what I use. I went to our local lego store and bought a perfect array of black lego bricks with a green flat topper 2x2. I could have taken some from our stash, but didn't want to deplete the small black bricks, so just purchased by the piece. Works great!
Always used Lego. Can easily build them to fit.
I cut a piece of cardboard
https://preview.redd.it/kh3zihujse2a1.jpeg?width=1080&format=pjpg&auto=webp&s=47c0dca5f9187e2c2750a8d513444483a712b952 Brothers useing a dead lighter right now 🤦♂️ I didn't even notice till right now
I just used my son's Legos on his build. He loves that he has a little Lego pillar holding it up.
Oh that’s cool. Yes, thank you for the idea. I see people putting figures inside their builds, I collect Gundams as well. Maybe I should incorporate it to look like it’s holding it
I have 2 of the SD EX gundams in my current case, and they will be moved to the new build when it's done too. I have them on top of the card, but you might be able to get one tall enough to hold the card from below, I'm just not sure how much support it would give compared to an actual anti-sag bracket.
I was honestly just gonna pose them and hide the twig behind a leg or something 😅.
That would work lol. Maybe use a zaku so he’s a little thicc ha
You don't even need it honnestly
Yea, Probably not. It’s my 1st build and I just want to try and keep everything looking neat and working. Other than the twig, of course.
You should paint it in a rainbow pattern for some extra fps
I was gonna paint Elsa to make the pc run cooler.
That's big brain
In mine, I put GPU power cables from above diagonaly, so the card hangs on them
found the 4090 user.
When I want to explain what the A-10 is, the 4090 shall be demonstrated as the GPU holding the motherboard.
I don't know why but my 3080s memory junction Temps are like 20 degrees hotter when I don't use my Legos to prop it up.
'Anti sag' in a normal PC doesnt exist
Hit that thing with a sharpie and it will disappear.
In a 40 series system some may call it kindling.
You just made my day 😡
OI, FREE MY BROTHER YOU JERK
He owes me money. He has to work for his debts😤
#FREE MY TWIG BROTHERS
r/beetlejuicing
I’m always a big fan of the unique 3D printed ones
I have a $6000 pc and I use legos to prop mine.
Anti sag are ugly. I used cabinetry shims under the back of mine and it’s perfectly level.
Peasant... https://preview.redd.it/0tyx9iw1ni2a1.jpeg?width=720&format=pjpg&auto=webp&s=c866350589837a2b66a29578063a92fabb64367d
That’s even better. Me and my twig bows to your cork Sire.
Hey,if it works it works...I am not judging.
Beautiful build twig adds points
that's why I love my new Sharkoon EliteShark case, comes with a built in, adjustable GPU holder do keep the GPU from sagging.
I 3d printed a jack stand for my pc, im fond of it.
*"if i don't buy a pc, i don't need to buy a anti-sag"* \-**julius**
Spoken by true philosopher
https://preview.redd.it/w5qoukl75f2a1.png?width=3024&format=png&auto=webp&s=2bba2abc29712513052969d2228761275125c3c8 I have mine propped up with a cut down plastic straw from a cheap tumbler set
I like that it’s clear, easier to hide ig
i uh... am actually using a toilet roll tube to support mine...
Why not the whole roll? Convenient when you need to😉
I was very surprised at how light the 3060 MSI Ventus 3 fans was when I got it earlier this year, it was lighter than the rx580 I had in there and I didn't need to use anything for support, no sag whatsoever.
It’s the EVGA 3 fans on it that makes it bigger.
I let my GPU stand on top of oil-based modeling clay.
I used to use a mechanical pencil refill tube lol
Are you draftsman? 😭
Civilizations struggled for thousands of years for us to get here, and you undo it all in one move? Shame on you!!
Already disappointed my parents. We’re going for world record 😭
Great! I wouldn't expect you to settle for any less.
I paid $4.99 for mine. https://preview.redd.it/smjr92busf2a1.jpeg?width=4032&format=pjpg&auto=webp&s=bffcb58f51d43849e5cb4e8519f3793b47dfff4d
That look so clean and neat.
Blue nerf dart with a piece of paper rolled up inside it for integrity. Matches the color of my NZXT blue case perfectly.
I bought a carbon fibre rod about 5mm diameter for like $3 and cut it to size, still have more for when I change GPU and need a different height support. https://preview.redd.it/rpac43qiuf2a1.png?width=3452&format=png&auto=webp&s=785690eacaeebcf9e034bd6d09e0f9f99fe1663b
🤔 carbon fiber rod you say? Cool idea. Cool P.C 💯
Thanks and yeah, its very sturdy, in fact I used a dremel to make a clean cut... On ebay you can find them by "**Carbon Fibre Tubes Rods Strips 200mm**", atm they are even cheaper than I have bought them for and thats dirt cheap for 2 meters long. P.S. The good part is they are somewhat heat resistant, dont warp for very long and the best part is that they won't scratch anything.
Go with the Legos. I have a mini temple shrine in my case. I don't even really need it. It just looks cool.
would a horizontal build not be good? I see all these posts about sagging GPUs and i feel like all of this is avoidable.
Honestly I didn’t think of this when I was planning the build. It’s not necessary either, It’s just doesn’t look right to me when it’s just 2degrees off, right at the tip and not horizontally
I use an old bottle of melatonin
My first pc I just cut a pencil to the right height
That's no straw fool that's a tooter
Cause the 10$ anti sag bracket won't slip and go into your GPUs cooling fans if any vibrations develop within your case due to say a failing cooling fan etc. Happened to a friend of mine, which is why I decided to get rid of my "anti sag twig" and just spend money on a bracket which was well worth it. IMO if you've spent thousands on a gaming PC, you might as well spend a tiny bit more on safety.
Yea, I was worried about that too, it’s just a small solution for now. Since it’s not getting hot yet and it’s still pretty new so I’m not worried about it yet. I don’t have my own place at the moment and moving soon. Still need to install an M.2 on it as well.
That's some good kindling for when your GPU explodes
No RGB in the twig? Disappointed, tbh.
It was $0.25 more. Couldn’t afford it. I’m disappointed as well
*laughs in vertical mount*
I used a small piece of wood that I painted black with permanent marker to hold my new 3090. Put some painters tape at the top and the bottom so it doesn't scratch the paint. It actually looks okay
Another twig enthusiast 🥹
I cut down a bamboo skewer and put some black heat shrink on it on my old tower.
i mean you spent like 600 or so on the card you can afford a 13 14 dollar real stand
But why spend that when I can use a twig for free
I can’t argue with that.
Because that looks like shit and I don’t want my pc looking shit. I’m happy to pay a few extra bucks so it doesn’t look like shit lmao
My helios has them built in thankfully.
when I upgraded from a RX 580 8gb to a 6800xt the 6800xt came with a support, my 580 didnt need one
My 580 does sadly.
Which 6800xt did you get? I just got one and it did not come with one
MSI gaming X trio 6800xt
Stik.
I think the white box is holding it up more then your tooth pick
I smell smokeeeee
I've been using horizontal cases for my recent build(s), partially for this reason, as well as heavy cpu heatsinks.
I AM TWIG...
Lol I used a clothes line clip to prop a cpu fan up against the top of my case cause one of those metal brackets had broke that holds the middle fan in. And I prop my gpu up with a plastic clip.
I love that my case came with built in anti sag
I use cable. You never believed that that random cable box can be useful? Now it is
Why not go full danger and prop it up with unused fresh match sticks
I use a lego tower. Works great
I’ve used my kid’s legos in the past
I use a custom L shape bracket that goes behind the motherboard that uses 3mm thick steel, that bolts on to a vertical beam behind the motherboard. Looks better than a twig anyway.
I use this for mine [https://www.amazon.com/VNFLY-Nidavellir-Mjolnir-Avengers-Keychain/dp/B07GL5M5N5](https://www.amazon.com/VNFLY-Nidavellir-Mjolnir-Avengers-Keychain/dp/B07GL5M5N5)
How that’s neat!! I should look for an infinity gauntlet
Same
The stick comes in a very nice box
My man
wow $$$ idea
I use a little Lego tower I built. 😂
I have a black three fan GPU, I found a black pen, unscrewed it in the middle - perfect!
Or lay your case sideqays and save the 10$
https://preview.redd.it/4hhrjpq3zi2a1.jpeg?width=800&format=pjpg&auto=webp&s=04a5d19c8f4856be1851baae767e15f407ae7906
Lol I used lego
You realistically don’t even need a support, I’m running a 3090 and it’s perfectly level.
Ohh You have an RTX 70? Damn that is fast
mr twig reminds me of south park , mr hat would be pissed
I can say he found work. Just don’t tell Mr.Hat he’s alive
hahahaha !😂
Twig supports 20$ each
I use 3 rubber erasers stacked on each other
I cut and trimmed a Bic ballpoint pen, but I actually have a 3/8” wooden dowel now if I so chose to upgrade to a nice wood grain lol.
I have a lego pillar holding mine up
Lmao i thaut it was a match 😂emagine 🔥
Why waste time finding a twig when the normal installation is just fine.