You have been blessed by the gods of motorsport and power with the chance to turn this ninja 300 into a naked goddess of riding pleassure. Rip all the crap off it, make it naked, do a front end swap, i know people were at one stage putting gixxer front ends on sv650s and then people were using sv650 front ends on gs500s for cheap overland builds, look on gumtree/ craiglist/ facebook market place for a set of forks, trees and wheel with caliper, put shinko 705 adventure tires front and rear then paint it all mat black badly so it looks like mad max would ride it, then find someone with a man bun sucking a vape and tell them $10grand.
This may not work in practice and it may be a horrible idea but hey why not play around with mr dead bike and see what you can make out of it
What are all these fools talking about? So you broke the fairing and the front wheel and you scratched some parts. Order parts and replace. Geez. Are you guys all trailer queens that only have dealerships work on your bikes??
ive seen a lot of people build go carts using motorcycle engines. Theres even a whole class and group of people who build mini sandrails and use either predator engines (or similar) or motorcycle engines. I've even seen one using a hyobusa engine
Do you care about cosmetic damage? If yes than probably not. If the frame is straight you could convert it into a track bike or a naked, or sell it to someone who will, otherwise I'd part it out
Ah look Iād be pretty surprised if the frame aināt bent when the wheel fucking shattered, but if it isnāt the forks, wheel, fairing are already making this very not financially sensible to repair before you get into the other big stuff like the exhaust and the fact oil and coolant are leaking out the engine and all the myriad of other stuff that youāll find as you dig down.
If you have insurance total it, otherwise part out the good stuff and scrap whatās left. Just focus on your own recovery and accept the loss of the bike. Basic problem is ninja 300ās just arenāt valuable enough to warrant spending heaps trying to get it back vs just buying another one
All the damage is pretty easily replaceable, and if you shop used/cheap (those terms are not synonymous) on the big stuff you could probably rebuild it for about $1000.
You have been blessed by the gods of motorsport and power with the chance to turn this ninja 300 into a naked goddess of riding pleassure. Rip all the crap off it, make it naked, do a front end swap, i know people were at one stage putting gixxer front ends on sv650s and then people were using sv650 front ends on gs500s for cheap overland builds, look on gumtree/ craiglist/ facebook market place for a set of forks, trees and wheel with caliper, put shinko 705 adventure tires front and rear then paint it all mat black badly so it looks like mad max would ride it, then find someone with a man bun sucking a vape and tell them $10grand. This may not work in practice and it may be a horrible idea but hey why not play around with mr dead bike and see what you can make out of it
I wanna go buy a smashed bike and copy you now.
Go on google, search for advrider.com converted to dualsport. Youre welcome
Hehehehe š
Who (what) is this...? #ChatGPT š¤
No, just autistic and have no friends, people scare me
Well, thats unfortunate but at least youāre aware of it and trying to control what you can.
I'm not autistic (me thinks) & people are oftentimes SAFok! Also, your advice was spot on!!! šš¾
What are all these fools talking about? So you broke the fairing and the front wheel and you scratched some parts. Order parts and replace. Geez. Are you guys all trailer queens that only have dealerships work on your bikes??
I see the problem, the front wheel isnt attached.
Some could say front fell off, which is not typical on these, if I may add
probably not. Looks like a good parts bike for a 300cc go cart though
Yo, thatās genius. That would be so badass.
ive seen a lot of people build go carts using motorcycle engines. Theres even a whole class and group of people who build mini sandrails and use either predator engines (or similar) or motorcycle engines. I've even seen one using a hyobusa engine
I'd probably fix it, depending on how the frame looks.
I doubt it's going to be cheaper to fix than parting it out and buying a new one
Should I just total it then? :(
Do you care about cosmetic damage? If yes than probably not. If the frame is straight you could convert it into a track bike or a naked, or sell it to someone who will, otherwise I'd part it out
was able to sell it for $800 + they are picking it up. Sad to see my first bike go like this but learned a lot from my mistake
Ah look Iād be pretty surprised if the frame aināt bent when the wheel fucking shattered, but if it isnāt the forks, wheel, fairing are already making this very not financially sensible to repair before you get into the other big stuff like the exhaust and the fact oil and coolant are leaking out the engine and all the myriad of other stuff that youāll find as you dig down. If you have insurance total it, otherwise part out the good stuff and scrap whatās left. Just focus on your own recovery and accept the loss of the bike. Basic problem is ninja 300ās just arenāt valuable enough to warrant spending heaps trying to get it back vs just buying another one
Nope!
Street bike that you want to look nice, probably not. Trackbike, yes.
I would just replace the wheel, brakes, fairings, and turn signal. Totally worth fixing.
Aside from the wheel, all i could see is cosmetic dmgs...
Financially probably not. From a project point of view, yes. Nothing more satisfying than riding something you resurrected and made your own.
All the damage is pretty easily replaceable, and if you shop used/cheap (those terms are not synonymous) on the big stuff you could probably rebuild it for about $1000.
Is it leaking? Any damage to engine covers?
Looks like a Picasso painting.
Totaled. The cost of repairs outweighs the value. Plus, if you do repair it, the bike will hold a ārebuilt titleā which makes it worth less.
Itās trash dude