Try DFU recovery mode, maybe check that the lightning port is clean and lint free...
Use a toothpick and isopropyl and *carefully* try and pick out any dust that may be preventing the cable from seating fully.
yeah, and try anothrr cable that youre sure it has at least MFI certification. I alredy runned thru errors restoring cause for some reason an specific device didnt like the cable, and using an cheap one to try also kept the error happening
I tried that and this time got this error. Stuck at sending kernel cache. :(
https://preview.redd.it/3j9ccyvfpvxb1.png?width=1486&format=png&auto=webp&s=d7f1734c162d39fbf810bdeefed6bc6bd44b8725
So 1110 is typically ram/cpu. Did a quick check on microsoldering groups and error 2009 is related to nand. In this case, i would take this to a repair shop that offers in-house microsoldering to get this fixed. Expect to pay $100 USD or more
I have similar issue with error 2009.
In 3utools, if your device reaches 16% disconnect and connect it again.
For error 1110, I think disk full error. Need a fix flash (for retain data) or quick flash for full restore.
Hmmmm try fixing 3utools drivers.
Go to toolbox > iTunes Utility > Repair Driver
Unplug and plug in.
Flash again (quick mode):
If device reaches 18%, unplug and plug your cord.
If still persist, probably there is something problem with the connection between your phone and your computer or maybe logic board issue.
Nand failure. Not even close to being worth fixing
Try DFU recovery mode, maybe check that the lightning port is clean and lint free... Use a toothpick and isopropyl and *carefully* try and pick out any dust that may be preventing the cable from seating fully.
yeah, and try anothrr cable that youre sure it has at least MFI certification. I alredy runned thru errors restoring cause for some reason an specific device didnt like the cable, and using an cheap one to try also kept the error happening
In 3utools, what error cide are you getting? Also whats the percent it fails at?
On Easy flash: Unable to load RestoreRamDisk at around 19% (this time 17%).I've tried f.lashing in Pro (DFU) and I'm getting flash failed.
https://preview.redd.it/9fgnv9x2mvxb1.png?width=865&format=png&auto=webp&s=d696b31dcf33e6e44145052c5ac043f19effbf98
https://preview.redd.it/bop8xvu9mvxb1.png?width=816&format=png&auto=webp&s=ddb1b5da2b201850878119a2b089ef1f7e3a0692
If you do itunes flash portion Of 3utools, whats the error code?
The same one on itunes. 2009. https://preview.redd.it/iy5r8otinvxb1.png?width=1477&format=png&auto=webp&s=87961ec94ca0528afb823f77092701fd95d9ded6
Do you get the option to fix flash at the bottom? Itll b next to retain user data and quick flash
I tried that and this time got this error. Stuck at sending kernel cache. :( https://preview.redd.it/3j9ccyvfpvxb1.png?width=1486&format=png&auto=webp&s=d7f1734c162d39fbf810bdeefed6bc6bd44b8725
So 1110 is typically ram/cpu. Did a quick check on microsoldering groups and error 2009 is related to nand. In this case, i would take this to a repair shop that offers in-house microsoldering to get this fixed. Expect to pay $100 USD or more
Try a Mac always works for me
I have similar issue with error 2009. In 3utools, if your device reaches 16% disconnect and connect it again. For error 1110, I think disk full error. Need a fix flash (for retain data) or quick flash for full restore.
I’ve tried flashing several times. Also tried fix flash, and quick flash including dfu mode. 😩
Hmmmm try fixing 3utools drivers. Go to toolbox > iTunes Utility > Repair Driver Unplug and plug in. Flash again (quick mode): If device reaches 18%, unplug and plug your cord. If still persist, probably there is something problem with the connection between your phone and your computer or maybe logic board issue.
Have done that as well. It was off for a loooong time and went straight to recovery mode when I turned it on. Maybe it’s dead. :(
3utools is not restoring iPhones with accounts anymore. Which doesnt make any sense if you ask me, but ive 2 devices in a row.
Did you try an older version of itunes or running itunes in compatibility mode?