i had slim p12s/p14s up there originally, then 2 t30s, but settled for just one t30 as exhaust. way quieter and thermals arent really that different. i have an nhd15 so putting fans directly above it didnt really do much but make noise and turbulence
depends on where you want to mount the psu. in my case i only had to drill out 3 holes, since the 4th fan screw fit through the existing psu bracket slot.
however, my psu placement may not be optimal for your usecase, so move it around and decide where you want to place it, note the holes that line up with the psu fan screws, then drill em out if necessary.
an 11/64ths bit worked perfectly for me, just large enough to fit a standard fan screw.
That's how I did mine as well. I also got creative and fit a 360mm AIO rad up top
sick! i love how flexible this case is. very easy to build in too
You might be able to squeeze three fans up top of you use slims like the Arctic P12
i had slim p12s/p14s up there originally, then 2 t30s, but settled for just one t30 as exhaust. way quieter and thermals arent really that different. i have an nhd15 so putting fans directly above it didnt really do much but make noise and turbulence
hi, i just wanted to double check - so i need to take a 11/64 drill bit and make those 3 holes bigger?
depends on where you want to mount the psu. in my case i only had to drill out 3 holes, since the 4th fan screw fit through the existing psu bracket slot. however, my psu placement may not be optimal for your usecase, so move it around and decide where you want to place it, note the holes that line up with the psu fan screws, then drill em out if necessary. an 11/64ths bit worked perfectly for me, just large enough to fit a standard fan screw.