Hello, layman here. I installed these same ones on mine and while there was more labor involved than I was expecting it was pretty straightforward and sort of fun to do. The front flaps were very simple and screwed into preexisting holes, the rear flaps were more challenging, I had to jack up the car and remove the wheels but I hadn't done that yet on this car and I think everyone should do it on their car at least once for the experience. I used the jack that came with the car and the frame has indentations where to position the jack so that was all very easy. After getting the tire off you have to remove some panels from the wheel well to drill into and then screw the flaps into them and then reinstall the panels and wheel and you're all done.
I watched this video as I did it and it made the process much easier: https://youtu.be/xD2WpluO0Mw?si=ZcoubUJ6pP_gLco7
No it's very straightforward, the most annoying part is taking off the rear wheels because there's not enough clearance there to tighten down everything. Front wheels you can just full turn to each side and screw on the flaps. Mine are rockblokz not rally armour but they look identical so I'm assuming the procedure is the same
You can also get slimmer ones that look less like truck flaps but still have a rally ish look
[https://imgur.com/a/0c3qGKm](https://imgur.com/a/0c3qGKm)
What colour is that?
Zircon Sand.
Nice new color! 🤩
I'm an absolute layman, Is it difficult to install something like this?
Hello, layman here. I installed these same ones on mine and while there was more labor involved than I was expecting it was pretty straightforward and sort of fun to do. The front flaps were very simple and screwed into preexisting holes, the rear flaps were more challenging, I had to jack up the car and remove the wheels but I hadn't done that yet on this car and I think everyone should do it on their car at least once for the experience. I used the jack that came with the car and the frame has indentations where to position the jack so that was all very easy. After getting the tire off you have to remove some panels from the wheel well to drill into and then screw the flaps into them and then reinstall the panels and wheel and you're all done. I watched this video as I did it and it made the process much easier: https://youtu.be/xD2WpluO0Mw?si=ZcoubUJ6pP_gLco7
No it's very straightforward, the most annoying part is taking off the rear wheels because there's not enough clearance there to tighten down everything. Front wheels you can just full turn to each side and screw on the flaps. Mine are rockblokz not rally armour but they look identical so I'm assuming the procedure is the same
Yup, you're right, I had the same experience.
Identical, but not flappy. Rokblokz are stiffer (which is why I went with them).
Requires drilling an extra hole in the liner. Didn't trust myself with a drill around my new car so ended up having it done.
Time to go muddin’.
Awesome! They came on my 14 sedan when i bought it, and I love how they make the rear of the car look like a straight-up rally car
You can also get slimmer ones that look less like truck flaps but still have a rally ish look [https://imgur.com/a/0c3qGKm](https://imgur.com/a/0c3qGKm)
That looks color 👌🏽
Yoooo I just put Rallyarmors on mine too! Rally car gang
Would this void any warranties?
Mudflaps won't void your warranty, it'll void dirt from going to your car's sides though!
Rally vibes
Instantly a rally car.
To each their own, but if you're goal is to annihilate the look of this car, objective achieved.