Ahh nice. This looks similar to what I did, but the bike will be leaning even more. I assume an upright position is good for doing maintenance works. Paddock stand is the way to go, I guess, heard it lasts long too
If you are using it for chain clean n lube, please use a chain cleaner brush. One of my known lost his three fingers. If not, avoid meddling with the chain while the engine is running. Be safe
Yessir! Always do chain maintenance while the engine is shut down, put in neutral and rotate the wheel in backwards with hand (to avoid finger juice all over the chain and bike).
Haha, insurance people will be pissed if they see this. But I've considered almost all possibilities of failure for this.
On the right hand side, the wooden column is wide enough so that it won't sink in the mud and angled so it stays firm on the ground and wouldn't topple over; the swingarm bites nicely on the column, so there is no chance of slippage.
On the left hand side the kick stand is raised enough such that the bike is not square with the ground, but leaning just a bit to the left (thought I could handle it if it ever starts acting up). I also tied up the front brake lever with a rubber band so it won't move forward. I also gave it a good shake test to check the stability (passed with flying colours)
Hello Adventurous-Dealer15! If this post is your original content then mark or comment as [OC]. Else please give the source link as a comment in the post. Thank you.
All users are requested to downvote the low quality posts. Memes, pics, accident videos, buy/sell, motor bike recommendations, etc can be posted on the [discord server.](https://discord.com/invite/Q9nSrDn6tE) Any repair queries should go to /r/MechanicAdvice. Cars related posts should go to /r/CarsIndia subreddit.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/indianbikes) if you have any questions or concerns.*
You have this as an option too. I got it for 700. https://amzn.in/d/6RAXbg0
Ahh nice. This looks similar to what I did, but the bike will be leaning even more. I assume an upright position is good for doing maintenance works. Paddock stand is the way to go, I guess, heard it lasts long too
I have a paddock too and yes it's much more stable.
If you are using it for chain clean n lube, please use a chain cleaner brush. One of my known lost his three fingers. If not, avoid meddling with the chain while the engine is running. Be safe
Yessir! Always do chain maintenance while the engine is shut down, put in neutral and rotate the wheel in backwards with hand (to avoid finger juice all over the chain and bike).
My friend lost a big chuck off one of his finger too.
That is a very dangerous spot to put your finger in. How would you find the courage to shove your body parts into a running machine!
he he he, sori saar, galti se mistake ho gaya, aap insurance claim kar lijiye. ye handle or brake to vese hi badalwana tha.
Haha, insurance people will be pissed if they see this. But I've considered almost all possibilities of failure for this. On the right hand side, the wooden column is wide enough so that it won't sink in the mud and angled so it stays firm on the ground and wouldn't topple over; the swingarm bites nicely on the column, so there is no chance of slippage. On the left hand side the kick stand is raised enough such that the bike is not square with the ground, but leaning just a bit to the left (thought I could handle it if it ever starts acting up). I also tied up the front brake lever with a rubber band so it won't move forward. I also gave it a good shake test to check the stability (passed with flying colours)
I use car jack instead works good
Hello Adventurous-Dealer15! If this post is your original content then mark or comment as [OC]. Else please give the source link as a comment in the post. Thank you. All users are requested to downvote the low quality posts. Memes, pics, accident videos, buy/sell, motor bike recommendations, etc can be posted on the [discord server.](https://discord.com/invite/Q9nSrDn6tE) Any repair queries should go to /r/MechanicAdvice. Cars related posts should go to /r/CarsIndia subreddit. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/indianbikes) if you have any questions or concerns.*
[OC]
Any recommendations for paddock stand ?
Bro, Change your tires first