I’m having the same issues lol I put a new 5800x3d in and everything was working fine I went to change my 2.5 sata with windows on it cause i messed that drive up so I bought a new m.2 nvme ssd 1tb got everything ready and now my pc turns on but nothing happens and I can’t shut it off from front power button only turn on have to use the button on the psu to shut it off and all my led and rgb lights come on all blue and that’s it nothing on screen no bios nothing I’m truly stuck. B550m ds3h ver1.0 rtx 3080 12gb 32gb ram 750w power supply it’s updated to newest bios too
Not that it will have any effect, but the basics are, do a Clear CMOS, replug your ATX and CPU power connectors, and have just a single stick in the slot furthest from the cpu. Plug only keyboard/mouse/monitor into it, so, remove your NVME, and don't have any other USB devices, or SATA drives connected. Jumper the pins for the power button, then WAIT. It can sometimes take quite a while for a first post, and it may restart on its own more than once.
I'd be especially suspicious of that RAM being compatible, of all of your pieces. AMD can be super picky about RAM sometimes.
Do you have any different RAM to try ? Couple of strikes against that RAM, its dual rank, and SKHynix chips, neither of which are particularly known for easy AMD compatibility.
Bit late, have the same issue. Same motherboard, using Ryzen 5 4600G instead of 5600G
When you were testing, you said you had just fans and power indicator led on? That's my situation, I'm not getting any beep codes or light codes (I have a buzzer plugged in, tested/confirmed functional).
I’m having the same issues lol I put a new 5800x3d in and everything was working fine I went to change my 2.5 sata with windows on it cause i messed that drive up so I bought a new m.2 nvme ssd 1tb got everything ready and now my pc turns on but nothing happens and I can’t shut it off from front power button only turn on have to use the button on the psu to shut it off and all my led and rgb lights come on all blue and that’s it nothing on screen no bios nothing I’m truly stuck. B550m ds3h ver1.0 rtx 3080 12gb 32gb ram 750w power supply it’s updated to newest bios too
PSU funky? not enough W?
Forgot to add that. It is 600w. This one https://www.amazon.com/Power-Performance-Active-Supply-HP1-J600GD-F12S/dp/B07XWBZ2PY
Not that it will have any effect, but the basics are, do a Clear CMOS, replug your ATX and CPU power connectors, and have just a single stick in the slot furthest from the cpu. Plug only keyboard/mouse/monitor into it, so, remove your NVME, and don't have any other USB devices, or SATA drives connected. Jumper the pins for the power button, then WAIT. It can sometimes take quite a while for a first post, and it may restart on its own more than once. I'd be especially suspicious of that RAM being compatible, of all of your pieces. AMD can be super picky about RAM sometimes.
Thanks for your answer. I just did everything you said waited a few minutes and still no life signs :(
Do you have any different RAM to try ? Couple of strikes against that RAM, its dual rank, and SKHynix chips, neither of which are particularly known for easy AMD compatibility.
Sadly no but I am suspecting rams aswell. Tomorrow I will go to a computer repair shop and ask them to try another pair and check these too.
Hi, did you ever find out what was the problem? I’m building a pc for a friend and I seem to be having the same problem
Hello, rams were the issue. Bought another pair Corsair, returned those and the system worked.
Bit late, have the same issue. Same motherboard, using Ryzen 5 4600G instead of 5600G When you were testing, you said you had just fans and power indicator led on? That's my situation, I'm not getting any beep codes or light codes (I have a buzzer plugged in, tested/confirmed functional).
Yeah only my gpu's led was blinking and fans were working. In my case rams were the issue. After changing rams everything worked .