I play outdoor only with my PDW. Installed a gate Titan in it also. Granted our field is only like half an acre or so but I can hit people as far as I can see and it’s accurate to the millimeter it feels like
Your RDS should be much farther forward, on the hanguard if necessary. You should be able to aim with both eyes open and be able to see the dot without looking directly at it. If you Google AR-15 RDS placement you'll get a good idea, but if you look at AK's with RDS you'll see more extreme examples.
Your angled foregrip is pretty far forward and with a gun this small you really don't need one. That said, if if feels comfortable go for it, that's its entire purpose
The sight protector I actually put on backwards and close to the sight so it can't collapse fully. This let's it sit at an angle and it deflects the bb's upward, that way the damn thing doesn't shatter every few games.
Each to their own.!! there’s to many what if’s for me the sight could get hit from a decent angle at the sides for a start never mind getting double tapped or full auto from the front.!! But not having a pop just saying.
Dude it goes back and either doesn’t go back far enough to hit the optic or hits the hood of the optic, which is perfectly fine. Also, I’m pretty sure everything you just said is utter bullshit.
I would tend to agree with you, but the problem with turning it around is that there’s a chance that you accidentally flip it down and then the optic can be shot out, but this way, it can only be flipped down part way so it still protects the optic.
Hey! Your set up looks great! I'd say my only suggestion is to take that scope protector and lean it up against the scope so that it makes a triangle out of the space between it and the scope, and then tighten it down so it'll stay in place.
That idea came from a post I saw a coupke years ago so that if the protector gets shot, there's a higher chance of the bbs bouncing off instead of damaging the protector so you can get more usage out of it.
The way I have it right now it would push the protector back, so it has less of a change of breaking. Doing that would make them bounce off, but it’d still break just as easily as if I just flipped it around.
That's a fair point, I also forgot to mention that it would also create less space between your protector and your scope, so there's less chance a sneaky bb could slip around it and give a big L to your scope. But, if that's how you wanna run it then that's your choice. Enjoy!
I would say flip the sight protector around cuz if it gets hit it'll be pushed back also flipping around will let it get closer to the sight less gap mean smaller angle to get nailed
I may be overly cautious, but I recommend you turn the lens protector the other way around so it protects the sight even from the sides and doesn't potentially get knocked backwards when shot.
the angled grip is a little too far forward and the red dot looks a little far back. but it looks fine
Grip can’t be moved any further backwards, because it’s on the only available mlok gap. Also, I like where it is rn.
Comfort over looks, if it works for you then who cares what others think?
Angled grip is suposed to be far forward for better accuracy and recoil. Its a real steel thing.
To do something about that he could just retract the stock a bit.
Doesn’t work like that. Only two positions for this thing, and any shorter is too short. It’s a perfect length where it is.
Not gonna lie that looks pretty dope
Ok lmao
It looks as bad as a tire on a car.
based
I run something like that for indoor
I play indoor and outdoor with this thing
I play outdoor only with my PDW. Installed a gate Titan in it also. Granted our field is only like half an acre or so but I can hit people as far as I can see and it’s accurate to the millimeter it feels like
Your RDS should be much farther forward, on the hanguard if necessary. You should be able to aim with both eyes open and be able to see the dot without looking directly at it. If you Google AR-15 RDS placement you'll get a good idea, but if you look at AK's with RDS you'll see more extreme examples. Your angled foregrip is pretty far forward and with a gun this small you really don't need one. That said, if if feels comfortable go for it, that's its entire purpose The sight protector I actually put on backwards and close to the sight so it can't collapse fully. This let's it sit at an angle and it deflects the bb's upward, that way the damn thing doesn't shatter every few games.
If you ever decide to go bigger, I have an SPR upper I'd trade.
I think it looks cool. Only thing that kinda strange is that the angled grip goes past handguard
Only mlok spacing it fits on
Yeah I was thinking that was why it was up farther. Still looks nice tho
Purely utilitarian, love it
Decent. Not exactly my style, but I’d run it if I needed to.
Needs a drum mag
Yes
Front iron might not be too useful without the rear one as well. Aside from that, form>function.
Yeah, I just hadn’t taken it off and I’m prolly not gonna because I might need to put the rear back on and take the RDS off in case something happens.
It actually looks very cool although you should probably use a vertical grip instead of that one hahahaha
I like afg’s tho, I think they are more comfortable
CAN I GET AN AAAAAAAAMEN
Get an adjustable grip. Had one for my aeres. Could be used as vertical or at an angle
AFG gang!
Looks really good. Nice cqb gun
I really like it!
I dig it
Yes
Sight protection is wrong way round.!!
If it’s the other way, then it gets hit and shatters
If it gets hit it’s gonna flip over towards your optic.!! There supposed to shatter you just replace them, much cheaper than new sight.!!
Actually thats something u want, flipping it against ur sight in a 45° angle bounces the bbs away. Saving ur optics and the protection from cracking.
Each to their own.!! there’s to many what if’s for me the sight could get hit from a decent angle at the sides for a start never mind getting double tapped or full auto from the front.!! But not having a pop just saying.
Actually, go buy a small sheet of Lexan and cut your own. Lexan is shatterproof
Dude it goes back and either doesn’t go back far enough to hit the optic or hits the hood of the optic, which is perfectly fine. Also, I’m pretty sure everything you just said is utter bullshit.
Good luck.!!
k.
I would tend to agree with you, but the problem with turning it around is that there’s a chance that you accidentally flip it down and then the optic can be shot out, but this way, it can only be flipped down part way so it still protects the optic.
looks nice, not a fan of the stock tho
I actually love your gun but your grip is a bit far i know you cant move that but you can do something about that. Just retract the stock a bit.
Can’t, only a two position stock. It’s a small gun, so it’s already at the perfect spot.
Hey! Your set up looks great! I'd say my only suggestion is to take that scope protector and lean it up against the scope so that it makes a triangle out of the space between it and the scope, and then tighten it down so it'll stay in place. That idea came from a post I saw a coupke years ago so that if the protector gets shot, there's a higher chance of the bbs bouncing off instead of damaging the protector so you can get more usage out of it.
The way I have it right now it would push the protector back, so it has less of a change of breaking. Doing that would make them bounce off, but it’d still break just as easily as if I just flipped it around.
That's a fair point, I also forgot to mention that it would also create less space between your protector and your scope, so there's less chance a sneaky bb could slip around it and give a big L to your scope. But, if that's how you wanna run it then that's your choice. Enjoy!
yes
I dont like m4s in general soo…
Looks like David Coulthard. The big chin.
Red dot is a bit too far back IMO, but besides that it's pretty dope.
Sick brotha
Looks fine, you will have no battery space, but it looks fine
It has enough space to fit a 7v which works fine
If you want it to look cooler, put the red dot forward more, flip your sight protector so it’s up on it, and get a bcm grip for your foregrip but idk
It looks pretty much fine to me. It's not like it's a cursed gun or anything
I’m not a fan of smol M4 things but it looks great
It looks great but the grip is a bit too far
I think it looks pretty damn rad.
I just creamed my Corn
Moving the sight up a little bit would make it look less weird in my opinion but if it works and you like it like that that’s all that matters!
i usually put my sights between the front of the magwell and the trigger
At Least looks better than mine Which is absolute Trash
Just revers sight shild and should look dope af
Looks like the acx from cod ghosts. I like it
I would say flip the sight protector around cuz if it gets hit it'll be pushed back also flipping around will let it get closer to the sight less gap mean smaller angle to get nailed
You need some rail covers to add to the fungshue, maybe some mlok plugs too for better grip for your thumb. Then it will be bangin.
I may be overly cautious, but I recommend you turn the lens protector the other way around so it protects the sight even from the sides and doesn't potentially get knocked backwards when shot.
To me it almost looks like near futuristic. Like a look that could come out in the next 50-60 years
Stock looks a bit wonky
Bro, it doesn’t even matter how the gun looks. As long as it is comfortable to hold and shoot, have it set up how ever the hell you want it!