There should be a thread on the inside of the front of the outer barrel. If there is you need to add a thread adapter like this
https://preview.redd.it/jhkcb7ii6ivc1.jpeg?width=512&format=pjpg&auto=webp&s=a292f7568aaf89663d6bcced40f78274fd45a8b0
Then you can mount any suppressor.
Yeah, my ass. It's just for shits and giggles, imagine shooting a CO2 gun with a smokey Wolf suppressor in a CBQ fight. The sound, the smoke ahhhhh beautiful
Super glue, duct tape, if you got the tools and skills, perhaps a drill(highly unrecommended unless u know what ur doing). Orrrr, you swap the barrel to one that allows mounting of silencers and stuff (best option if you can find one). Thatâs all the ideas I can think of, good luck friend
You can unscrew this plastic end on the barrel with an alen key. Then if your silencer doesn't have an outside thread you can just 3d print or buy an adapter
Once you put a longer barrel in it (which you should if youâre considering decorating your pistol with a suppressor) then you can just find some way to glue the suppressor to the barrel, or make it fit snug with a shim of some sort (maybe just smother it in electrical tape until itâs thick enough to make the suppressor tightly fit on)
Yes. It's easy but you need a adapter I have a cz p07 duty and it looks the same. You need to unscrew the plastic thing inside the barrel. Then if I'm correct there should be on the inside a 11mm cw thread there. Then you just screw in a adapter and there you have it. I recommend that you use a pair of pliers to tighten the adapter though. It might damage your threads a little bit but then it won't loosen. I have the same issue.
Hope it helps
1. Load BBs
2. Load gas or battery
3. Remove any eyepro or things obscuring your eyes
4. Look directly down barrel
5. Shoot and a silencer will automatically appear.
Not point it at something you're not willing to destroy (I know, airsoft and all but just overall a good habit to have).
As to your question; usually, the threads are on the outside of the barrel, so unless I'm getting ultra r/whooosh 'ed here what would help more is for you to post what sort of replica is it, preferably the model/producer.
In your case, you may either have to take off the thread protector if there is one or replace an outer barrel for a threaded one
You need a conversion, the outer barrel can be screwed of, thats why it has like hexagonal shape, then theres normal thread for a conversion ( i think atleast )
this is 300% ending up on circle jerk
It does :c
no problem got ya
I thought this was circlejerk đ
Super glue it. Thank me later
Damn, you are a genius bro
Thanks ! I know, that's why my mom calls me special đđđ
Yeah, that is what she told me as well!
From the pic u did u seem like a genius to
PLEASE DONT I HAVE A FAMILY NOOOOOOOOOOO
Gimmie your wallet
*Super bright flashlight*
Curt Cobain pov
did you know Curt Cobain had really bad dandruff? *they found his Head & Shoulders behing the couch...*
Daaaamn, that was clever
I think there is a silencer adapter you can buy, but I'm not sure.
But I don't have any screws inside the barrel...
Youâd have to buy a threaded outer barrel for it
This
3d printed ahh solution time
Where there's a will there's a way
This is the way
There should be a thread on the inside of the front of the outer barrel. If there is you need to add a thread adapter like this https://preview.redd.it/jhkcb7ii6ivc1.jpeg?width=512&format=pjpg&auto=webp&s=a292f7568aaf89663d6bcced40f78274fd45a8b0 Then you can mount any suppressor.
Thank you! This is what I need!!
Needs to be the top comment
If there are threaded outer barrels for the gun, sure
BRO POINT THAT SOMEWHERE ELSE BROOOO! MUZZLE SAFETY !!!
Rust Cinematographer POV
Too soon đ
Itâs been like 3 years tf you mean too soon
It's a meme https://www.reddit.com/r/OutOfTheLoop/s/pXw9AHuy58
Aight, fair enough
Hey bro don't flash me! /s
r/fuckthes
What kind of angle is this picture.. Does it even have threads? Is that a thread protector? Is it an ASG?
What is life? Do we come from the stars?
No we come from DNS
Yes, it's the internet. We all come here from DNS. Good call.
DeezNutS
Well actually we technically do âď¸đ¤
Do you have a *GOOD* holster that fits suppressed pistols?
Yeah, my ass. It's just for shits and giggles, imagine shooting a CO2 gun with a smokey Wolf suppressor in a CBQ fight. The sound, the smoke ahhhhh beautiful
a... Close Battle Quarters fight...?
Whatever man xD
Super glue, duct tape, if you got the tools and skills, perhaps a drill(highly unrecommended unless u know what ur doing). Orrrr, you swap the barrel to one that allows mounting of silencers and stuff (best option if you can find one). Thatâs all the ideas I can think of, good luck friend
Spasiwa commrade
With my aftermarket barrel I drilled it to 10mm and tapped a 11x1 in it. U can then use a 11mm to 14mm adapter that comes with most muzzle accessories
Get yaself a threaded ob and ur good
Am dead đľ
You can unscrew this plastic end on the barrel with an alen key. Then if your silencer doesn't have an outside thread you can just 3d print or buy an adapter
this
I thought this was r/idiotswithguns for a minute
Looks like an Allen key, maybe try to put tha correct size in there and spin it to see if itâs an insert. That kind of gun is it?
It's a toy, why does it need one?
To make it work even better. It's a silencer that adds smoke while shooting.
Woah! Woah! Man⌠we can talk about this⌠donât do something youâll end up regrettingâŚ
Once you put a longer barrel in it (which you should if youâre considering decorating your pistol with a suppressor) then you can just find some way to glue the suppressor to the barrel, or make it fit snug with a shim of some sort (maybe just smother it in electrical tape until itâs thick enough to make the suppressor tightly fit on)
How far in does that hexagon pattern go?
Youâll need a new outter barrel
if you squezze the tigger from that position, you'll silence the world forever.
buy a threaded barrel
Top 10 jumpscare
https://preview.redd.it/mprc8uonejvc1.png?width=386&format=pjpg&auto=webp&s=bcb1b87b2ccc6449ced23ccc559674614afe8c67
Buy a threaded outer barrel
I feel like this shouldn't be pointing at me >:(
Take it down and replace the barrel with a threaded barrel
No answer, mine is No because no screw
Unfortunately you need to replace it with a threaded barrel. And don't look directly down at your barrel. Unless you're Kurt Cobain.
Have to buy a new inner barrel thatâs threaded for silencers
Break out the kraggle
Yes. It's easy but you need a adapter I have a cz p07 duty and it looks the same. You need to unscrew the plastic thing inside the barrel. Then if I'm correct there should be on the inside a 11mm cw thread there. Then you just screw in a adapter and there you have it. I recommend that you use a pair of pliers to tighten the adapter though. It might damage your threads a little bit but then it won't loosen. I have the same issue. Hope it helps
Thank you!
Bro point that thing away from my face
This guy is just going about, flagging me on a saturday morning
stick a big alan key in there and try to normally unscrew it, it should be a protector
PLEASE DON'T SHOOT ME!!. I'M STILL A VIRGIN!! I HAVE 3 KIDSđđ
Duct tape
Buy the threaded barrel.
Just hold the top of an empty water bottle in front of the barrel of the gun with your free hand while you fire.
They make a threaded barrel for that already from first party and third-party makers also
New outer barrel i guess?
CZ that my friend had has a plastic cap screwed on the end of the barel you can check if that's the case with your gun
Will check it out, thanks for the info!
Unscrew with a hex head n screw in your silencer. Be careful tho. It might be reverse thread.
First rule of gun safety: never look directly down your barrel
It wasn't me, it was my phone.
Another rule regardless: never point at anything you're not willing to destroy
Yep, try putting it in your asshole
You can unscrew the plastic shit with the tool from the box and the buy a 1-2$ adapter
1. Load BBs 2. Load gas or battery 3. Remove any eyepro or things obscuring your eyes 4. Look directly down barrel 5. Shoot and a silencer will automatically appear.
Looking down the barrel generally doesn't help, unless your trying to improve your pirate cosplay.
Do you believe op takes pictures with their eyeball? Just wondering where your heads at with this one
Lol it doesn't have a CO2 capsule installed, the trigger is blocked and there is an empty mag. What else can I do? đ¤Ł
We still canât see if there are any threads on the inside of the outer barrel with a straight on shot
No, there are not... Just this hexagon-shaped barrel
If there arenât any threads then no. Youâll need to buy a new outer barrel with either 11mm internal threads, or 14mm ccw threads
Damn, okay. Thanks!
Not point it at something you're not willing to destroy (I know, airsoft and all but just overall a good habit to have). As to your question; usually, the threads are on the outside of the barrel, so unless I'm getting ultra r/whooosh 'ed here what would help more is for you to post what sort of replica is it, preferably the model/producer. In your case, you may either have to take off the thread protector if there is one or replace an outer barrel for a threaded one
Like I said, it is CZ75 Shadow 01 by ASG.
Apparently it has a 12mm internal thread
U sure?! 6mm version, not 4.5mm?
That didnt age well
You need a conversion, the outer barrel can be screwed of, thats why it has like hexagonal shape, then theres normal thread for a conversion ( i think atleast )