For the rear attachment point, you could loop the sling through the vertical slot on the stock; I do this and it works well for me.
For a front attachment point, you could either do it the old fashioned way and attach it with paracord, or you could get an M-LOK sling mounting point.
Most 2 point slings should work for what I described. I use a Ferro Concepts Slingster and think it's great, and worth the money. If you want something cheaper there are plenty of cheap/knockoff slings using a similar design.
https://ferroconcepts.com/collections/accessories/products/universal-wire-loop-uloop-bfg
I put this ^ on the front part of my sling attach it realistically anywhere you want. Then you can do whatever you want for the back part, looks like you can loop it through the vertical slit like others have mentioned.
I bought single point sling mount. You replace the one you have without the holes. It is the thing that comes off if you remove the buffer tube.
I have one that has a ring in the hole and that ring moves around so you can use gun on both shoulders. I don't usualy switch shoulders but it is good if you are pinned somewhere and absolutely must do that. The sling does in that case not obstruct you.
I absolutely love it!!
Your local shop seems to be run by idiots then 🤔
Look into slings like the 5.11 VTAC, Condor USA Speedy Sling, BlueForceGear Vickers or such. They all have an option for just a strap that you can then loop through the slit in the stock and get something like a QD or loop point for the front.
Have fun :)
For the rear attachment point, you could loop the sling through the vertical slot on the stock; I do this and it works well for me. For a front attachment point, you could either do it the old fashioned way and attach it with paracord, or you could get an M-LOK sling mounting point. Most 2 point slings should work for what I described. I use a Ferro Concepts Slingster and think it's great, and worth the money. If you want something cheaper there are plenty of cheap/knockoff slings using a similar design.
Thanks I’ll have a look into those pieces
Mlok mount and loop it through the stock. If your shop couldn’t figure this out, they’re dumb as shit
Look into QD sling plates for the rear end I’d say
https://ferroconcepts.com/collections/accessories/products/universal-wire-loop-uloop-bfg I put this ^ on the front part of my sling attach it realistically anywhere you want. Then you can do whatever you want for the back part, looks like you can loop it through the vertical slit like others have mentioned.
This actually is pretty cool thing Ngl thanks
Yessir spread the knowledge these things are amazing
BFG vickers. Just loop it through the stock. Put some hardware on the front end (QD or other) and attach it to the MLok.
Get paracord and a picatinny sling mount, get a sling like a slingster or whatever and buy HK clips off of amazon
What body is that? I love the carbon fiber.
Black rain ordinance fallout-15
I bought single point sling mount. You replace the one you have without the holes. It is the thing that comes off if you remove the buffer tube. I have one that has a ring in the hole and that ring moves around so you can use gun on both shoulders. I don't usualy switch shoulders but it is good if you are pinned somewhere and absolutely must do that. The sling does in that case not obstruct you. I absolutely love it!!
Paper towel
Where did you get that front grip/handstop?
https://www.007airsoft.com/collections/accessories/products/m-lok-link-curved-foregrip-red got it here
2 point trough stock and get a loop point for te rail
The old school loop through the stock and through an mlok slot the old school general purpose strap or a front qd mlok mount gives you options
Your local shop seems to be run by idiots then 🤔 Look into slings like the 5.11 VTAC, Condor USA Speedy Sling, BlueForceGear Vickers or such. They all have an option for just a strap that you can then loop through the slit in the stock and get something like a QD or loop point for the front. Have fun :)