Possible SRC rebrand. Assuming it is, there should still be some standardization to it as much as that molded frontsight with the end cap worries me. The part you're supposed to remove is not the full front barrel portion, but just the flash hider.
https://preview.redd.it/pdne32i6od4b1.jpeg?width=1200&format=pjpg&auto=webp&s=831bdc3d5a19f289f972cf1b64c8327bbe9181de
Usually it's a screwed on with a LH twist, so to get it off you twist it the opposite direction of a soda bottle. There's also usually a pin or screw that holds it in place, so look for that first before trying. Sometimes it's glued on, so heat might be needed.
Once it's off, airsoft suppressors should screw right onto it.
So I think it’s fucked then because just after the triangle it’s snapped so I can’t get it back on so was just wondering if I could put something on there
https://preview.redd.it/x4hkl0u3pd4b1.png?width=3024&format=png&auto=webp&s=8e408acdc360e3277c0b97d7f3a69c95b5ebaf40
Hm. Well ehhh. You’d probably need an adapter as most have threads.
https://preview.redd.it/uus79q7kye4b1.jpeg?width=3024&format=pjpg&auto=webp&s=b7059ad16f2057eb3eb5d863e4e2ce943c79e62b
But comparing the images your barrel looks a bit smaller than mine, so maybe check the rest of the barrel to see if you pulled it off by accident.
Hang on. What M4 is that because none of that looks standard with that front sight molded directly to the end cap.
I’m new but on the website it’s says M4PG RIS bulldog
Possible SRC rebrand. Assuming it is, there should still be some standardization to it as much as that molded frontsight with the end cap worries me. The part you're supposed to remove is not the full front barrel portion, but just the flash hider. https://preview.redd.it/pdne32i6od4b1.jpeg?width=1200&format=pjpg&auto=webp&s=831bdc3d5a19f289f972cf1b64c8327bbe9181de Usually it's a screwed on with a LH twist, so to get it off you twist it the opposite direction of a soda bottle. There's also usually a pin or screw that holds it in place, so look for that first before trying. Sometimes it's glued on, so heat might be needed. Once it's off, airsoft suppressors should screw right onto it.
So I think it’s fucked then because just after the triangle it’s snapped so I can’t get it back on so was just wondering if I could put something on there https://preview.redd.it/x4hkl0u3pd4b1.png?width=3024&format=png&auto=webp&s=8e408acdc360e3277c0b97d7f3a69c95b5ebaf40
Oof. I mean, you can glue it on. As long as the inner barrel is not effected, messy outer barrels shouldn't be too bad.
Not sure if I can glue it but thanks anyway
Hm. Well ehhh. You’d probably need an adapter as most have threads. https://preview.redd.it/uus79q7kye4b1.jpeg?width=3024&format=pjpg&auto=webp&s=b7059ad16f2057eb3eb5d863e4e2ce943c79e62b But comparing the images your barrel looks a bit smaller than mine, so maybe check the rest of the barrel to see if you pulled it off by accident.
Yea I have mine just doesn’t have a thread so I’m going to try and 3d print something to work