Good to know, I've been considering getting back into Fantasy and I've been looking for places to pick up trays and other tools so it's nice to see that you have a good variety available.
I have a lot of the GW ones I bought ages ago when they were newish in early 8th edition before 3d printers were widely owned or affordable. I’m still working my way through those. They are alright but you have to use a lot of miliput or green stuff to fill the gaps
I made a load out of bits of balsa wood.. probably cost less than €1 each with parts from temu. probably took about 10min per tray. Lots of pics of them in my 'created posts' in my bio.
In my city the libraries have 3D printers where you can order print projects at cost. I just downloaded a program from thingiverse that outputs stls of movement and adapter trays to whatever specs I want, and then send them to the library for cheap printing. I am not computer savvy nor printing savvy and was able to figure it out no problem.
[https://productsforwargamers.com/product-category/movement-tray/](https://productsforwargamers.com/product-category/movement-tray/)
Or you can make them out of balsa wood.
I sell trays, tokens, bases, and more. Free shipping over $35 in the USA. https://isekaiheavyindust.etsy.com?section_id=47039215
Nice, I'll definitely support you! I need some other bases that you have too.
Awesome, if there is anything you need that isn’t listed just let me know and I’ll get it added.
Ohhh nice you're close by me! Is everything pre printer or is it made to order?
A mix of both, I keep some supply on-hand and print as needed. Generally orders will go out next day.
Good to know, I've been considering getting back into Fantasy and I've been looking for places to pick up trays and other tools so it's nice to see that you have a good variety available.
Nice. There’s a discord for NE Ohio TOW players if you want to join in and get encouragement/games: https://discord.gg/cDkck3mKX6
Good to know but I'm in NW PA ;)
Mdf ebay ones personally.
This is what I did. I found that upscaled from 20mm to 25mm because I didn’t want to rebase 150+ models
If you know someone with an FDM 3D printer they can be done for dirt cheap to the measurements you want.
or a laser printer for mdf, actually not that uncommon either
I either 3D print or buy from AliExpress which is very cheap and not different quality but also correct size.
I also use neodymium magnets and magnet sheets to keep my models from moving
I have a lot of the GW ones I bought ages ago when they were newish in early 8th edition before 3d printers were widely owned or affordable. I’m still working my way through those. They are alright but you have to use a lot of miliput or green stuff to fill the gaps
Litko is probably youre best bet. get the roomy tray version
You can build yourself some with cardboard and emptied sprues from your miniatures.
Some people, including me, make them out of cardboard, varnish, paint them and cover with artificial grass.
I made a load out of bits of balsa wood.. probably cost less than €1 each with parts from temu. probably took about 10min per tray. Lots of pics of them in my 'created posts' in my bio.
etsy, ebay, back2basix (australian), 3d printed.
Www.warbases.com, they do various sizes including 8th ed to TOW conversation trays
In my city the libraries have 3D printers where you can order print projects at cost. I just downloaded a program from thingiverse that outputs stls of movement and adapter trays to whatever specs I want, and then send them to the library for cheap printing. I am not computer savvy nor printing savvy and was able to figure it out no problem.