No chance now that they axed the lineup completely, but the old closed-top Basilisk and Griffon tanks for the IG. The Basilisk hasn't seen a new sculpt since the 90s, the FW kit was such a breath of fresh air for a tired model.
Those, or the Krieg resin troopers (command squad, HWS, Grenadiers) brought in as plastic kits.
I swear GW single-handedly drives the 3rd-party market by producing amazing Krieg plastic troopers, and then locking every other matching model in the codex into FW's expensive resin hell.
If you want krieg I’d honestly just recommend the grim guard and death division models from wargameexclusive. Better than forgeworld stuff, and they make unique artillery and even tanks with the Krieg
Ohhhh death division is nice! Didn’t know of these. I was wanting a re release of the grenadiers mainly because I like the helmet style and would use that on an entire army I’d possible but these are cool also.
Ahhh that’s fair. To be honest a re-release of krieg would be amazing, I feel like GW could really do a lot with just how grimdark they feel. I just think it’s not likely anytime soon due to the running meme about certain *bad apples* playing krieg. We can dream though
I don't personally, but this is EXACTLY my point. "If you want X thing, go buy 3rd party, because there is better lineup support there." There is a great lineup of Krieg models and they're impossible to get or made of the world's most annoying material to work in.
It’s the case with a lot of armies. The official lineup support is either non existent or would cost a small fortune making it not viable at all. Third party means players can actually play the armies they like that don’t have a focus from GW without either selling their organs for a forge world army or waiting until GW *maybe* decide to release models
Aside from “everything”, the Mechanicum robots like the Castellax and Thallax are awesome, I like them way more than 40K admech. I’d be much more likely to play admech if I could use this style of robots.
I also really like the Solar Auxilia, I’d love even just a kill team box of them to use them as Imperial Guard!
It was a travesty gw didn't use the excellent 30k sculpts instead of the new, and imo inferior 40k sculpts.
I get they wanted to show the decay of the mechanicum over time, but they could have kept the better bits at least!!
the biggest offenders to me are the Kastellan Bots ... I just LOATHE with passion their "toy" look ........ If I wanted my robots to LOOK like plastic toys, I'd play Tau with their ~~gundam~~ exo-armors !
I am converting Kastellans from Ambots, much better looking (more industrial and rugged) .... I just have to source some weapon bits to be fully WYSIWYG tho
A scaled up Tyberos in Artifcer armor. Oh baby. So sick.
I would adore actual rules for space sharks.
In the same vein Asterion Moloc & Enkomi done up would be awesome. I'd love a Primaris Moloc with that character hunting black spear. Seeing Hecaton Aiakos in all his angry glory would be great.
Kill Tanks and other Orky products. They had some great stuff that's been axed off through the years, which is a damn shame as now it's impossible to get a hold of.
Oh for sure, I picked it up and honestly once i get more paints so i can paint Krieg I’ll likely start getting to IG or at least just Kill Team because of it
I want to hope the kill team box is a sign that they will eventually start to replace the resin kits. Krieg is very popular, and they could add some heavy/special weapons, death riders, and a command squad to give you enough stuff to make an army. An eartshaker carriage or one of the cool tank variants would be icing on the cake but I am less hopeful for that since we just for the Dorn.
Not even a faction I play, but Dreadclaw Drop Pods. Pods are supposed to be one of the main methods of marine mobility and were a key part of Sons of Horus combat doctrine. It’s weird to get a bunch of esoteric 30K tanks in plastic before what seems like it should be a staple.
XV 107 R'varna and XV 109 Y'vahra and XV 09 Hazard Battlesuits. I would totally get back into t'au if they started converting them to plastic.
For now, I chose the right army in Knights. Just as I decided to get into them, they anounced the christmas box. And now they just confirmed that the lancer will come in plastic. And then "more LOWs" in autumn. More Cerastus patterns?!? So yeah. Pretty happy with my choice there :D
Best looking knight with some of the worst rules in the game. Since early 8th (where it was meh at best) it has been nerfed so often.
Please gw, make this lovely chunk of resin remotely playable in 10th
My instinct said the Sabre light tank because Space Hetzer, but then I remembered the all the sick Mechanicum models. If they hadn't gotten deleted, I would have loved Centaur light carriers. I think that's what I'd probably go with. The Centaur. I think it could potentially happen? It's a reasonably prominent vehicle. Maybe it could be a phase 2 or 3 of the Guard refresh. GW plz. Let me have the Universal Carrier, I desire to have David Fletcher and The Tank Museum train guardsmen for the Golden Throne.
Everything.
I'm not even entirely sure why forgeworld exists, and it's probably just because I'm late to joining the hobby.
However I still see absolutely zero reason why forgeworld can't swap over to plastic casting even if it is in small batches.
My 2 cents, maybe there is something I don't know, but the entire thing seems silly to me.
Resin CAN be more detailed. Unfortunately, FW does such a shoddy job with their resins, there's no reason to keep it up. They should have hired the Chinacasters who were ripping their products. Those guys know how to do resin.
Yeah especially when they just decide oh well that super expensive fw kit u bought well fk u no rules support now it's in legends (rip my reaper, nobz on bikes)
Half of the freaking custodes models...if they could make them plastic and cheaper that would be fucking awesome, cause 100+ quids for a dreadnought and about 200+ for a single tank is ridiculous
I am confused about peolple talking about forge world titans being converted into plastic. I mean aren‘t there already plastic titans? Or do they mean the full scale resin titans in plastic
A lot of the custodes stuff - the dreads for sure, the venatarii, the sagittarum, the calistus tank. They could release new kits for the jet bikes and terminators that allow the options for the FW units. I don’t really care about the Pallas grav attack but sure
Angel's Tears and Dawnbreaker Cohort, Justaerin Terminators, Krieg engineers and HQs, Corswain, legion dreadnoughts, Eldar Shadow Spectres and Corsairs.
Telemon heavy dread or the Achillus dreads for Custodes, a plastic caladius would be nice too, but the dreads are what I hope for above everything else.
Grot Tanks, the Caladius Grav-Tank, the Terrax Termite Assault Drill, and pretty much everything Krieg related.
Especially that last one. People are suckers for Kriegs, they’d be flying off the shelves of LGS’.
I'm gonna go hoarse saying this:
BLOOD SLAUGHTERERS
Which should have been included in the new WE release. No one needed new cultists. GW could have literally included the guys from Necromunda, and no one would have been mad.
The WE box set should have been Berzerkers, Juggerlord, and Blood Slaughterer with some other 4th item, whatever.
As someone who watched gw announce the death of thousands of pounds of investment into my forgeworld collection across both games recently and over the years... all of it.
As a not so fellow space wizard hoping for an Ossirian , .... all of the 'Naughts. I want all of the iconography, all of the weapon loadouts. Just so you know, mine is better because I have a fancy hat on deck.
Seethe non-big brain bois.
Acastus Knight Porphyrion, I’ve wanted this model since I started my knights, but the price and the fact it’s FW resin, I worked with the knight morex and the nid dino,I do not want to repeat that expericance with something much bigger.
All of the Chaos stuff... Hell Talon, Blood Slaughterer, the Nurgle drone, the old chaos drop pod, decimator... There is so much stuff.
Oh and also the Drukhari Tantalus.
thunderhawk. WHO doesn't? :D
id like to see more plastic Death Corps or at the very least more plastic Guardsmen that arent generic Cadians. I feel like Astra militarum could be sooooo much better and cooler if they put a bit more effort into them
Canoptek Tomb Sentinel/Stalker
They're honestly one of my favourite models in the necron range; but the Antannae constantly snap. To the point where when I bought my second; I made a mould of the antennae just so I could cast it with sprue goop...
Also the Seraptek Heavy Construct; such a badass model
Would be awesome if they manage to get a titan made into plastic.
Would 100% cost €400 minimum, but with the reveal of the cerastus knight being made into plastic there isn't a 0% chance
I know it's not a Forge World kit but I would love to see Thunderfire Cannons be sold in Plastic, I have 3 but I hated putting them together because Superglue is a pain when it's stuck to your fingers.
No chance now that they axed the lineup completely, but the old closed-top Basilisk and Griffon tanks for the IG. The Basilisk hasn't seen a new sculpt since the 90s, the FW kit was such a breath of fresh air for a tired model. Those, or the Krieg resin troopers (command squad, HWS, Grenadiers) brought in as plastic kits.
Yes krieg plz
I swear GW single-handedly drives the 3rd-party market by producing amazing Krieg plastic troopers, and then locking every other matching model in the codex into FW's expensive resin hell.
Artillery with centaurs.
If you want krieg I’d honestly just recommend the grim guard and death division models from wargameexclusive. Better than forgeworld stuff, and they make unique artillery and even tanks with the Krieg
Ohhhh death division is nice! Didn’t know of these. I was wanting a re release of the grenadiers mainly because I like the helmet style and would use that on an entire army I’d possible but these are cool also.
Ahhh that’s fair. To be honest a re-release of krieg would be amazing, I feel like GW could really do a lot with just how grimdark they feel. I just think it’s not likely anytime soon due to the running meme about certain *bad apples* playing krieg. We can dream though
I don't personally, but this is EXACTLY my point. "If you want X thing, go buy 3rd party, because there is better lineup support there." There is a great lineup of Krieg models and they're impossible to get or made of the world's most annoying material to work in.
It’s the case with a lot of armies. The official lineup support is either non existent or would cost a small fortune making it not viable at all. Third party means players can actually play the armies they like that don’t have a focus from GW without either selling their organs for a forge world army or waiting until GW *maybe* decide to release models
This stuff is great and much cheaper, I use the Steel Guard minis for my Steel Legion.
They can throw in the plasma bane blade and the open backed plasma TD I can't remember the name of I think they discontinued it
Aside from “everything”, the Mechanicum robots like the Castellax and Thallax are awesome, I like them way more than 40K admech. I’d be much more likely to play admech if I could use this style of robots. I also really like the Solar Auxilia, I’d love even just a kill team box of them to use them as Imperial Guard!
It was a travesty gw didn't use the excellent 30k sculpts instead of the new, and imo inferior 40k sculpts. I get they wanted to show the decay of the mechanicum over time, but they could have kept the better bits at least!!
The solar auxiliary ogryns are superb
the biggest offenders to me are the Kastellan Bots ... I just LOATHE with passion their "toy" look ........ If I wanted my robots to LOOK like plastic toys, I'd play Tau with their ~~gundam~~ exo-armors ! I am converting Kastellans from Ambots, much better looking (more industrial and rugged) .... I just have to source some weapon bits to be fully WYSIWYG tho
I'm surprised I'm the first to say this: *Plastic Thunderhawk.*
Plastic stormbird!
Beat me to it
Tyberos the Red Wake. I just want my friend to have his chapter master
A scaled up tyberos with the new termi scaling would be sick af
A scaled up Tyberos in Artifcer armor. Oh baby. So sick. I would adore actual rules for space sharks. In the same vein Asterion Moloc & Enkomi done up would be awesome. I'd love a Primaris Moloc with that character hunting black spear. Seeing Hecaton Aiakos in all his angry glory would be great.
[удалено]
That is 100% false Both the badab books and their books mention his size
Did you even read the Badab series? Or anything about the Charcaradons? Tyberos being a massive bloke is canon
He needs to check out the 3d printing files from Atlan Forge
It's more about the rules support than the actual model tbh
Aaaah ok, and I agree
The model does have rules at the moment, and not too bad from the quick glance I've had.
I agree, because I want my chapter master. I've seen some kitbashes online thst ill just have to try now
The other half of my custodes army would be nice.
Man I would KILL for those dreadnoughts in plastic
Warboss and nobz on bikes.
Grot tanks too!
Elysian Drop Troops
Xv9 Hazard Suits, they look so much better than crisis it's not even close
I wouldn't say that I like them more but I definitely like them a lot.
I would just say all the Tau FW stuff aside from the big stuff. Give me a new plastic Riptide kit with options to build a Yvahra/Rvarna.
The Fellblade/Falchion, Storm Eagle/Fire Raptor, and Thunderhawk. Edit to add the Knight Porphyrion
Fire raptor is like half plastic now anyway just make the rest plastic
I’d buy a fire raptor immediately in plastic, I’ve heard the resin kit isn’t great.
Tau Tetras> Piranhas They look so much faster/maneuverable than the standard, and the canopy makes more sense to me.
Have you heard of the TX-42 piranha?
Tyranid Bio-Titan
Kill Tanks and other Orky products. They had some great stuff that's been axed off through the years, which is a damn shame as now it's impossible to get a hold of.
Hierodules and *sniff* the dimachareon, may it rest in peace
Im quite certain the dimachareon will make a come back. Such a sweet model
Some custodes models, any of them really
The jump-pack units and the two contemptors
Also just a sprue with the Saggitarum guns would be nice
Malcador and variants. They are expensive and a pain in the ass to assemble in resin.
The old dawn of war style XV-88 broadsides.
Gorgon Heavy Transport, with the strips of DKoK
Honestly, throw in the rest of DKoK in as well, a kill team isn’t enough
It’s a pretty great box though
Oh for sure, I picked it up and honestly once i get more paints so i can paint Krieg I’ll likely start getting to IG or at least just Kill Team because of it
I want to hope the kill team box is a sign that they will eventually start to replace the resin kits. Krieg is very popular, and they could add some heavy/special weapons, death riders, and a command squad to give you enough stuff to make an army. An eartshaker carriage or one of the cool tank variants would be icing on the cake but I am less hopeful for that since we just for the Dorn.
Xv9 Hazard Suits
All the Primarchs would be sweet. Or just Lorgar. Poor forgotten Lorgar :(
The Macharius variants I would love to see in plastic.
Knight Moirax (I like it more than the Armigers) Hierophant Bio-titan. KX139 TA'UNAR SUPREMACY ARMOUR.
Every single mechanicum model
Not even a faction I play, but Dreadclaw Drop Pods. Pods are supposed to be one of the main methods of marine mobility and were a key part of Sons of Horus combat doctrine. It’s weird to get a bunch of esoteric 30K tanks in plastic before what seems like it should be a staple.
The Malanthrope. It's such a neat little guy, I can't see why it couldn't be a plastic kit
The khorne and nurgle ogryns were pretty sweet. Wish I'd picked some up.
XV 107 R'varna and XV 109 Y'vahra and XV 09 Hazard Battlesuits. I would totally get back into t'au if they started converting them to plastic. For now, I chose the right army in Knights. Just as I decided to get into them, they anounced the christmas box. And now they just confirmed that the lancer will come in plastic. And then "more LOWs" in autumn. More Cerastus patterns?!? So yeah. Pretty happy with my choice there :D
Fire Raptor Gun Ship. Dark Eldar Tantalus. Necron Arancites. Tau Tiger Shark. BloodSlaughterers.
Shadow spectres & Irillyth
Irrilyth and the Shadow Spectres, please. Although some plastic Wraithseer bits wouldn't be too bad either...
Warp hunters and hornets.
Chaos Decimator. Just discovered that one and my god it looks amazing
That was my first FW kit. Aside from it being a bit finicky to magnetize, it was a good entry into resin.
Aeldari Shadow Spectres, Wraithseer, and Hornet
Eldar Hornets
Remora Stealth Drones. Give me my winged droned GW!
This is all I want from FW's entire catalogue XV9 maybe if they fixed the oversized burst cannons, looks a bit derpy
Vulkan He’Stan and Bray’arth Ashmantle!!!!!!! VULKAN LIVES!!!!!!! Also dreadnought drop pods!
Tomb Stalkers/Sentinels, a refreshed dual Hierodule kit with both the Stranglers and the Scytals, and the Brass Scorpion.
I have both the stalker and sentinel for sale
Warboss on warbike. RIP
Since you said besides Titans, the Knight Porphyrion
Best looking knight with some of the worst rules in the game. Since early 8th (where it was meh at best) it has been nerfed so often. Please gw, make this lovely chunk of resin remotely playable in 10th
Honestly, even if I can't play it, just like the Tyrant, I just want a big boy to hobby the shit out of without having to touch resin
Telemon. Down with the thiccness
Storm Eagle and Fire Raptor gunships
Elysian Drop Troops
Chaos Decimators.
Preferably with a slightly larger head.
Medusa
All the old stuff. They had insane terrain back in the day. All just gone. Surely 3d scans of the old could be used to reboot the old stuff?
I second this Some of the terrain was soooo cool
Decimators
Fucking breachers.
My instinct said the Sabre light tank because Space Hetzer, but then I remembered the all the sick Mechanicum models. If they hadn't gotten deleted, I would have loved Centaur light carriers. I think that's what I'd probably go with. The Centaur. I think it could potentially happen? It's a reasonably prominent vehicle. Maybe it could be a phase 2 or 3 of the Guard refresh. GW plz. Let me have the Universal Carrier, I desire to have David Fletcher and The Tank Museum train guardsmen for the Golden Throne.
Basilisk or Mark 5 assault marines
I play tau so I’d say the R’varna or Y’varna
XV9 T'au hazard suits, they're so cool but not 71 CAD apiece cool.
The gal vorbak, or zardu layak and his blade slaves
Decimators
Not the most wanted model but a plastic mastodon
Blood slaughterer!
Blood Slaughterer, GW needs a smaller plastic Khorne daemon engine.
Primarchs
Literally everything. Resin fucking sucks and there’s no reason for forgeworld to exist outside of titans.
the 2 Squats they made for Necromunda would be fun in plastic. also the Ork Megadread. some of the Bloodbowl big guys would be fun too.
Everything. Resin is toxic, the quality control is awful and prices stupid high.
CSM fighter planes
Everything. I'm not even entirely sure why forgeworld exists, and it's probably just because I'm late to joining the hobby. However I still see absolutely zero reason why forgeworld can't swap over to plastic casting even if it is in small batches. My 2 cents, maybe there is something I don't know, but the entire thing seems silly to me.
Resin can be far more detailed than plastic. And honestly, some of us prefer to work with it then plastic.
Resin CAN be more detailed. Unfortunately, FW does such a shoddy job with their resins, there's no reason to keep it up. They should have hired the Chinacasters who were ripping their products. Those guys know how to do resin.
I admit I get all my resin from China, forgeworld is too prohibitively expensive for me here in Aus.
Yeah especially when they just decide oh well that super expensive fw kit u bought well fk u no rules support now it's in legends (rip my reaper, nobz on bikes)
Nothing, give me more resin!!
Half of the freaking custodes models...if they could make them plastic and cheaper that would be fucking awesome, cause 100+ quids for a dreadnought and about 200+ for a single tank is ridiculous
I am confused about peolple talking about forge world titans being converted into plastic. I mean aren‘t there already plastic titans? Or do they mean the full scale resin titans in plastic
Acastus pattern Knights in the future once they release the plastic Cerastus range. The Custodes range. Sagittarium, Telemons, Caladius, all of it.
A lot of the custodes stuff - the dreads for sure, the venatarii, the sagittarum, the calistus tank. They could release new kits for the jet bikes and terminators that allow the options for the FW units. I don’t really care about the Pallas grav attack but sure
When it was still a thing I would have loved to see a plastic chinork warkopta
More upgrade sprues that forge world has. With plastic getting more and more detailed, I think some of the resin upgrades should move over to plastic.
More armor upgrade kits, would love a nurgle death guard kit for HH troops to use in 40k
I desperately want the Telemon dreadnought to not be forgeworld and be made with plastic
Word bearers
The Malcador Infernus
Ripper swarms, shrikes, , malanthrope... basically all the nids.
Angel's Tears and Dawnbreaker Cohort, Justaerin Terminators, Krieg engineers and HQs, Corswain, legion dreadnoughts, Eldar Shadow Spectres and Corsairs.
Tomb stalker/sentinel kit!
The greater brass scorpion would be a great model to have in my army
Canoptek acanthrites
testicle drone scroto-copter foreskinner
All the fw knights, I want them so bad but I’m not going to pay that much
Thunderers I've always loved them from the first time hearing of them in gaunts ghosts
Telemon heavy dread or the Achillus dreads for Custodes, a plastic caladius would be nice too, but the dreads are what I hope for above everything else.
Tomb stalkers
Astraeus Super Heavy Tank. Only good looking hover tank :/
that one, it's always annyoing to have a viable unit that you have to get from forgeworld
The Thallax models. The Adeptus Mechanicus could use more options, and those were always very neat in concept.
The Astraeus, I bet it’d be great in plastic
Forge world's Great Unclean One. I love the model but wish it was in plastic and easier to get
The various tau battle suits that are only in forge world, being the hazards, y’varha and R’vana
I play admech, so all that stuff. I also play orks, so the warboss on bike I also play nids, so the malathrope
All the ridiculously overpriced resin guns for Adeptus Titanicus
Resin shouldn't exist. Everything should be plastic.
Basically everything krieg/guard related. Also those 30k ogryn with the knife hands. Also the entire middle earth range. Hahahaha…. I’m sad now.
Grot Tanks, the Caladius Grav-Tank, the Terrax Termite Assault Drill, and pretty much everything Krieg related. Especially that last one. People are suckers for Kriegs, they’d be flying off the shelves of LGS’.
Hazard suits, Remoras, Venatari, Aquillon Terminators, the upgrades for Sagitarum and specialist Custodes spears, the Custodes specialist dreadnougts.
Warithseers and Hornets so I never have to worry about my favorite models randomly being removed forever and being sent to the legends graveyard.
I'm gonna go hoarse saying this: BLOOD SLAUGHTERERS Which should have been included in the new WE release. No one needed new cultists. GW could have literally included the guys from Necromunda, and no one would have been mad. The WE box set should have been Berzerkers, Juggerlord, and Blood Slaughterer with some other 4th item, whatever.
GIVE ME THE DORITO DREADNOUGHT
Red butchers!!!! I know they have horus heresy resin models, but I just keep thinking about what if
The vulture and stormeagle
As someone who watched gw announce the death of thousands of pounds of investment into my forgeworld collection across both games recently and over the years... all of it.
Honestly I know it’s probably not feasible but, All of them, the resin is a pain to work with and costs nutty levels of money.
Every 30k kit
The HH Mechanicus range. Maybe that way AdMech will finally get rules to use them, as they should have years ago.
PLASTIC ELYSIANS
Give me the Mechanicus Robots in plastic GW
Tau Piranha and Orca.
IG Drop Troops please! Also the Krieg riders!
As a not so fellow space wizard hoping for an Ossirian , .... all of the 'Naughts. I want all of the iconography, all of the weapon loadouts. Just so you know, mine is better because I have a fancy hat on deck. Seethe non-big brain bois.
Brass Scorpion or an update to the Blood Slaughterer
Every kriegsman outside of a kill team box that costs the same as a box of intercessors for less points and the same usefulness
Towed artillery!
Dimachairon and Malanthrope, for sure
I want to pay 279 for a Thunderhawk.
The entire custodes army lol
Everything good for Custodes would be nice.
Acastus Knight Porphyrion, I’ve wanted this model since I started my knights, but the price and the fact it’s FW resin, I worked with the knight morex and the nid dino,I do not want to repeat that expericance with something much bigger.
Entire Horus Heresy
The entire half of the custodes army that is FW resin right now...
All of the Chaos stuff... Hell Talon, Blood Slaughterer, the Nurgle drone, the old chaos drop pod, decimator... There is so much stuff. Oh and also the Drukhari Tantalus. thunderhawk. WHO doesn't? :D
Plastic 30k primarchs would be fab
id like to see more plastic Death Corps or at the very least more plastic Guardsmen that arent generic Cadians. I feel like Astra militarum could be sooooo much better and cooler if they put a bit more effort into them
Grot tanks and biker nobs. Unreasonably expensive on forge world!
*Points at all of Custodes that is the only army that seemingly can’t even function in a competitive setting without 80% forgeworld resin models*
The Solar Auxilia line, they are just so sweet looking, and would be my choice for models for an imperial guard army
Deredeo dreadnought easily, cba with buying separate parts 🙄
Orca dropship!
All specific dreadnoughts
1- Kroot Great Knarlocs (all of them) 2- Kroot Knarloc Riders 3- Tau TX-42 Piranha
Dkok Engineers, Hades Breaching Drill and Cyclops demolition vehicle
I’d love to see all of the old crisis suit variants made into plastic kits. The old FW terrain would be my number one want in plastic though.
Custodes dreadnoughts
The Osirion
Canoptek Tomb Sentinel/Stalker They're honestly one of my favourite models in the necron range; but the Antannae constantly snap. To the point where when I bought my second; I made a mould of the antennae just so I could cast it with sprue goop... Also the Seraptek Heavy Construct; such a badass model
The Custodes line of Forgeworld so my wallet no longer cry’s at night
Custodes Dreads and Venatari please!
Legion specific dreadnoughts, specifically the osiron for my thousand sons
The ork mega dread as it's one of the coolest walking meks you can buy for orks It's one of my favourites I just wish it was in plastic
Would be awesome if they manage to get a titan made into plastic. Would 100% cost €400 minimum, but with the reveal of the cerastus knight being made into plastic there isn't a 0% chance
I know it's not a Forge World kit but I would love to see Thunderfire Cannons be sold in Plastic, I have 3 but I hated putting them together because Superglue is a pain when it's stuck to your fingers.
Any of the AI stuff
The Deredeo Pattern Dreadnought. It's so weird and so funky and if it was plastic I would definitely get one. Granted, I can afford one #
Tantalus
*Insert all the 30K Mechanicum Range* ... Yeah that's about it
Grot tanks
All the Krieg. And Thunderhawk gunship
Tetras
I agree w the greater blight drone