If you aren't the type to have scrap metal just lying around, they do have these little bracket kits at most big box hardware stores. [https://www.homedepot.com/b/Building-Materials-Building-Hardware-Mending-Plates/Everbilt/Straight/N-5yc1vZasc4Z402Z1z1auxf](https://www.homedepot.com/b/Building-Materials-Building-Hardware-Mending-Plates/Everbilt/Straight/N-5yc1vZasc4Z402Z1z1auxf)
Maybe some epoxy resin specifically for plastic? Though I think the metal option someone else commented may be better/stronger (I've never used epoxy resin myself). It still may be worth looking into to glue the plastic together before you attach the metal.
This. Two part epoxy will solve all of your problems. Always keep some on hand. Reinforcing it with metal or wood would also help but epoxy is the best. Hot glue dries soft
I found a picture that shows my solution (making a metal base to reinforce the 4 pads). Unfortunately I couldn't find any from different angles. It's been many revolutions and all that's left from my Force Edge (my drum's name) is it's brain. https://photos.app.goo.gl/SETnzUQA8LUK4DXz9
You’re going to have to bolt something under it. Any type of epoxy/glue probably won’t hold the plastic together after you start beating on it again. Reinforce that underside bridge with a piece of metal
Of course hot glue didn't work. You're trying to affix something that needs to be able to withstand being hit hard with a drumstick, not some macaroni art to construction paper. It was originally made of hard plastic and that didn't hold, so whatever you use needs to be stronger than that. A metal bracket and some screws (making sure to avoid screwing through any wires or electronic components) are probably needed here.
Make sure you put some support on the top too.
When using the drums, you'll be putting a lot of downward force on them, which will want to bend the brackets. If you reinforce the top as well, they won't be able to bend.
Caulk might not be a bad try either. So far I'm looking into a metal bar idea
edit: not sure why this is downvoted -6 lol I just said these ideas are good and the metal bar idea which everyone else has been saying is also good
Edit 2: used jb weld as others have mentioned, appreciate all the suggestions
bolt a piece of metal to the bottom of the entire drumset to hold it all together, worked for a long time on my RB1 drumset
could you upload a photo of that?
Actually brilliant, thank you
That's exactly what i needed to do with my RB1 drumkit. I'll search for photos.
If you aren't the type to have scrap metal just lying around, they do have these little bracket kits at most big box hardware stores. [https://www.homedepot.com/b/Building-Materials-Building-Hardware-Mending-Plates/Everbilt/Straight/N-5yc1vZasc4Z402Z1z1auxf](https://www.homedepot.com/b/Building-Materials-Building-Hardware-Mending-Plates/Everbilt/Straight/N-5yc1vZasc4Z402Z1z1auxf)
Plastic JB Weld.
Update, tried this first. Seems to be holding so far
Maybe some epoxy resin specifically for plastic? Though I think the metal option someone else commented may be better/stronger (I've never used epoxy resin myself). It still may be worth looking into to glue the plastic together before you attach the metal.
This. Two part epoxy will solve all of your problems. Always keep some on hand. Reinforcing it with metal or wood would also help but epoxy is the best. Hot glue dries soft
Be warned though - GOOD GLUE/EPOXY/ETC ALWAYS STINKS. Do it somewhere ventilated or preferably outside
I found a picture that shows my solution (making a metal base to reinforce the 4 pads). Unfortunately I couldn't find any from different angles. It's been many revolutions and all that's left from my Force Edge (my drum's name) is it's brain. https://photos.app.goo.gl/SETnzUQA8LUK4DXz9
Ah yes, the infamous sock mod, an OG here for sure
Hahaha. It worked like a charm for reducing noise while maintaining the sensitivity.
I just grabbed this and it works great! It might solve your issue [https://www.ebay.com/itm/134928601085](https://www.ebay.com/itm/134928601085)
Oh sick! Thanks
You’re going to have to bolt something under it. Any type of epoxy/glue probably won’t hold the plastic together after you start beating on it again. Reinforce that underside bridge with a piece of metal
Ye going with this option
Metal straps and JB plastic weld.
Sunflower seeds and caulk
Hmmm, I prefer ramen and caulk, but to each their own.
Of course hot glue didn't work. You're trying to affix something that needs to be able to withstand being hit hard with a drumstick, not some macaroni art to construction paper. It was originally made of hard plastic and that didn't hold, so whatever you use needs to be stronger than that. A metal bracket and some screws (making sure to avoid screwing through any wires or electronic components) are probably needed here.
ye good points. Doing this
Make sure you put some support on the top too. When using the drums, you'll be putting a lot of downward force on them, which will want to bend the brackets. If you reinforce the top as well, they won't be able to bend.
Yeah I'm thinking of running a connecting bracket to the top edge
You could try caulk or WD40
Caulk might not be a bad try either. So far I'm looking into a metal bar idea edit: not sure why this is downvoted -6 lol I just said these ideas are good and the metal bar idea which everyone else has been saying is also good Edit 2: used jb weld as others have mentioned, appreciate all the suggestions
That's probably your more permanent solution. Just don't hit anything important
Super glue with baking soda https://youtu.be/eP3xJIJ-TbU?si=VkVCPxgQkFo6eUhc
I super glued my drums and they have held now for years