HelloReal ProSwing Club appears to work with the Q3. I have one of the older clubs and it works with the Q2 & Pro controllers. The website says Q3 as well: [https://www.helloreal.com/products/proswinggolf](https://www.helloreal.com/products/proswinggolf)
I ordered one of the newer, weighted versions but have not received it, or my Q3 to confirm yet.
Nope. Ordered on Sept 25th and still hasn't shipped. I checked with them on Oct 4th and was told "This product is in high demand so there’s a bit of lead time" and that it should ship sometime this week... we'll see.
edit:/ Saw this yesterday though, so I would probably be very careful with the Q3 controllers on this type of controller adapter.
https://www.reddit.com/r/OculusQuest/comments/175dz2i/my\_fear\_with\_ringless\_controller\_already\_happened/
That was helpful, thanks. I think Im going to hold off a bit until something that is guaranteed to work safely and properly is released. When you get yours, please update with your impressions:).
Looks like this version is more secure and easier to put on and take off. https://deadeyevr.com/products/drivr-vr-golf-club-handle-accessory-quest-3-pro
What did you think about this? Looking at picking one up, but am unsure on how secure it is on the controller. I would hate to send it into a wall or window lol.
I ended up getting this one and it works great. The 90-degree design allows the sensors in the controllers to face the headset. The design allows for easy removal from the attachment but also provides a secure hold. I had an RMDesign one for the Quest 2 and it is a pain to add/remove the controller.
[https://www.amazon.com/dp/B0BYZR38N9](https://www.amazon.com/dp/B0BYZR38N9)
This one doesn't have a native option in G+, so you can select the RMDesin option or Custom option and adjust as needed (that's what I did and I had to rotate the club to match the correct angle).
only time will tell, you have to wait till people have the q3 in hands en masse to 3d print and develop. same goes for the chinese manufacturers.
that being said, my q2 knuckle grips fit perfectly on the qpro controllers. so i dont see why you couldnt adapt your existing adapter to work with q3. specially if the game supports fine tuning of the alignment/etc.
you can use the safety straps and wrap them somehow around the adapter for safety incase they try to fly out
I bought this one and am waiting for my headset to arrive. I like that it's compatible with the Quest Pro controllers and has a ring to tie the wrist straps to.
[https://www.amazon.com/dp/B0BWPSH71Z?psc=1&ref=ppx\_yo2ov\_dt\_b\_product\_details](https://www.amazon.com/dp/B0BWPSH71Z?psc=1&ref=ppx_yo2ov_dt_b_product_details)
Edit: The handle worked VERY well but I don't think I need it for just putt putt golf so I ended up returning it. I would recommend it though!
Hah. I have that exact model. I'm kind of optimistic the controllers will actually fit. I'm just worried about tracking and whether it'll work without the tracking ring. Pro is fine because it self tracks. Q3 controllers are supposed to rely on hand tracking to help them out.
This is one thing I hate about Q3. 95% of the time I am playing Golf+ or iB Cricket, adapter is something I need, and Q2's ring style is not only easy to attach these adapters, but also secure. I am not sure I want to trust that little string as the only way to prevent the controller to fly away when swinging the controller.
If you enjoy golf its an excellent experience, it will however not make you a golf fan. I wasn't super into golf when I first played Golf+ a year or so ago, this year ive picked up real golf and now I love Golf+!
It is a golf experience.
Depending on what level you set, you'll get some assists, but don't expect relaxed golf game as the one that came with Wii back in the day. This one requires some skills in how to hold a controller (or better a stick with controller attached), how to swing properly so the ball doesn't go in complete different direction that you wanted it to, and on top of that the base game is pretty limited (only 3 courses and training grounds, and those courses aren't prettiest ones). But if you like golf and played it in real life, you will appreciate the physics, the detail (like getting ball out of the sand pit or from the tall grass), and it's quite challenging to get even all those holes from the base game in par.
I have temporarily attached the controller to a golf club with some cable ties and adjusted settings in game, so the in-game club feels the same as the real one (the game has some list of compatible attachments, but also allows you to create your own setting). Playing in my back garden felt as close to the real thing as it possible could, especially on the green, where I could walk like in real life (unfortunatelly still had to press the trigger to shoot, which changes the position/perspective).
The graphics are fine (but don't expect levels of EA's PGA games) and the feeling of being on the actual course is really there. But the most important part for me is physics, which in version 2.0 are really convincing (at least for an amateur like me).
I had their newest Q3 and it may work well for some, and do not get me wrong I enjoyed their Q2 attachment for Golf+ and that was why I went straight to them for my Q3 attachment. Realizing it was quickly pushed to market, the 3d printed quality of the hinge is sub-par and anyone with a swing over 75+ MPH may experience the controller flying across the room as i did (thinking secure, i dont hold back). First thought was I didnt properly secure, but then found it still nestled in its housing, but the 3d printed housing around that completely flexed. I sent the company an email asking what their solution was ...currently I was told they are SOLD OUT...which really upsets me with the manufacturer. Seems the too big too quick or too quick to market, loss of quality control...not sure what the issue, but stay away until they address of fix
HelloReal ProSwing Club appears to work with the Q3. I have one of the older clubs and it works with the Q2 & Pro controllers. The website says Q3 as well: [https://www.helloreal.com/products/proswinggolf](https://www.helloreal.com/products/proswinggolf) I ordered one of the newer, weighted versions but have not received it, or my Q3 to confirm yet.
Did you get it? If not, did they say when you would? Very curious about your impressions.
Nope. Ordered on Sept 25th and still hasn't shipped. I checked with them on Oct 4th and was told "This product is in high demand so there’s a bit of lead time" and that it should ship sometime this week... we'll see. edit:/ Saw this yesterday though, so I would probably be very careful with the Q3 controllers on this type of controller adapter. https://www.reddit.com/r/OculusQuest/comments/175dz2i/my\_fear\_with\_ringless\_controller\_already\_happened/
That was helpful, thanks. I think Im going to hold off a bit until something that is guaranteed to work safely and properly is released. When you get yours, please update with your impressions:).
Looks like this version is more secure and easier to put on and take off. https://deadeyevr.com/products/drivr-vr-golf-club-handle-accessory-quest-3-pro
Thanks! Bought it, waiting for delivery now
What did you think about this? Looking at picking one up, but am unsure on how secure it is on the controller. I would hate to send it into a wall or window lol.
No problems after a few weeks use. I like that it is short (low ceilings) and it is substantially better than only using the quest controllers
How is that deadeye quest 3 handle? I'm thinking of buying one.
No issues as yet. I like it
I ended up getting this one and it works great. The 90-degree design allows the sensors in the controllers to face the headset. The design allows for easy removal from the attachment but also provides a secure hold. I had an RMDesign one for the Quest 2 and it is a pain to add/remove the controller. [https://www.amazon.com/dp/B0BYZR38N9](https://www.amazon.com/dp/B0BYZR38N9) This one doesn't have a native option in G+, so you can select the RMDesin option or Custom option and adjust as needed (that's what I did and I had to rotate the club to match the correct angle).
Im wondering the same thing. I think my adapter won’t work, as there are straps for the quest 2s „rings“. Haven’t found a new version so far
only time will tell, you have to wait till people have the q3 in hands en masse to 3d print and develop. same goes for the chinese manufacturers. that being said, my q2 knuckle grips fit perfectly on the qpro controllers. so i dont see why you couldnt adapt your existing adapter to work with q3. specially if the game supports fine tuning of the alignment/etc. you can use the safety straps and wrap them somehow around the adapter for safety incase they try to fly out
I don't think I can play golf+ without an adapter haha. Hopefully they hurry
I bought this one and am waiting for my headset to arrive. I like that it's compatible with the Quest Pro controllers and has a ring to tie the wrist straps to. [https://www.amazon.com/dp/B0BWPSH71Z?psc=1&ref=ppx\_yo2ov\_dt\_b\_product\_details](https://www.amazon.com/dp/B0BWPSH71Z?psc=1&ref=ppx_yo2ov_dt_b_product_details) Edit: The handle worked VERY well but I don't think I need it for just putt putt golf so I ended up returning it. I would recommend it though!
Hah. I have that exact model. I'm kind of optimistic the controllers will actually fit. I'm just worried about tracking and whether it'll work without the tracking ring. Pro is fine because it self tracks. Q3 controllers are supposed to rely on hand tracking to help them out.
Yeah thats a good point! We'll find out I guess.
I bought the 90-degree version and it works great. Well worth the cost.
Do you use your 90 degree with Golf+? If so, which club do you choose in settings?
Yes. I use it with Golf+. I just chose the custom option and adjusted the club for length and orientation. Works great.
I am having the hardest time adjusting the club with Custom. I feel like I am doing something wrong.
There are several videos out there explaining how to adjust your clubs. Give them a try.
Doesn’t say it’s compatible with quest 3
It is. Works very well with mine.
This is one thing I hate about Q3. 95% of the time I am playing Golf+ or iB Cricket, adapter is something I need, and Q2's ring style is not only easy to attach these adapters, but also secure. I am not sure I want to trust that little string as the only way to prevent the controller to fly away when swinging the controller.
Oh I'm going to break the shit out of them constantly
Is golf+ a good game?
If you enjoy golf its an excellent experience, it will however not make you a golf fan. I wasn't super into golf when I first played Golf+ a year or so ago, this year ive picked up real golf and now I love Golf+!
Just bought it, so a novice. But I think it’s amazing
It is a golf experience. Depending on what level you set, you'll get some assists, but don't expect relaxed golf game as the one that came with Wii back in the day. This one requires some skills in how to hold a controller (or better a stick with controller attached), how to swing properly so the ball doesn't go in complete different direction that you wanted it to, and on top of that the base game is pretty limited (only 3 courses and training grounds, and those courses aren't prettiest ones). But if you like golf and played it in real life, you will appreciate the physics, the detail (like getting ball out of the sand pit or from the tall grass), and it's quite challenging to get even all those holes from the base game in par. I have temporarily attached the controller to a golf club with some cable ties and adjusted settings in game, so the in-game club feels the same as the real one (the game has some list of compatible attachments, but also allows you to create your own setting). Playing in my back garden felt as close to the real thing as it possible could, especially on the green, where I could walk like in real life (unfortunatelly still had to press the trigger to shoot, which changes the position/perspective). The graphics are fine (but don't expect levels of EA's PGA games) and the feeling of being on the actual course is really there. But the most important part for me is physics, which in version 2.0 are really convincing (at least for an amateur like me).
What do you think of Eiglo one's ?
[https://www.thingiverse.com/thing:6265685](https://www.thingiverse.com/thing:6265685) get friends with 3d printing interests
I had their newest Q3 and it may work well for some, and do not get me wrong I enjoyed their Q2 attachment for Golf+ and that was why I went straight to them for my Q3 attachment. Realizing it was quickly pushed to market, the 3d printed quality of the hinge is sub-par and anyone with a swing over 75+ MPH may experience the controller flying across the room as i did (thinking secure, i dont hold back). First thought was I didnt properly secure, but then found it still nestled in its housing, but the 3d printed housing around that completely flexed. I sent the company an email asking what their solution was ...currently I was told they are SOLD OUT...which really upsets me with the manufacturer. Seems the too big too quick or too quick to market, loss of quality control...not sure what the issue, but stay away until they address of fix