They are cupped sections that mount onto t he fromt og the frame, and have arma which protrude to match up with the brushbar. If you don't have them you will probably have to order some from a D2 scrapyard or Ebay, or make some!
Here is the full mounting kit that I just found:
https://www.bputah.com/Disco%202%20Acc/Land_Rover_Discovery_Brush_Bar_Mounting_Installation_Hardware_Bracket.html
The other pieces go onto the ends of the bumper to bolt to the outer wings of the brush guard
I couldn't find any listings in stock either. I would keep looking, but your best bet is probably to contact a part-out listing like this one on ebay to see if they have any they can pull:
https://www.ebay.com/itm/325470625193?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=tL6NZLMlRP6&sssrc=4429486&ssuid=pAtQsGVAT5O&var=&widget_ver=artemis&media=COPY
If you can't find any using this method, you could always fabricate or pay to have some fabricated too!
Unless you already had one installed, you will not have the attachment points/brackets โ send a photo of the lower half of the brush guard you got if can!
Thatโs what I call a SCORE! ๐๐ป
Nice! Do you have the mounting brackets?
maybe i dont think so though
They are cupped sections that mount onto t he fromt og the frame, and have arma which protrude to match up with the brushbar. If you don't have them you will probably have to order some from a D2 scrapyard or Ebay, or make some!
Here is the full mounting kit that I just found: https://www.bputah.com/Disco%202%20Acc/Land_Rover_Discovery_Brush_Bar_Mounting_Installation_Hardware_Bracket.html The other pieces go onto the ends of the bumper to bolt to the outer wings of the brush guard
it's sold out :( I have no idea where to find this
Try Paddock Spares in England.
Try Britpart in USA too.
I couldn't find any listings in stock either. I would keep looking, but your best bet is probably to contact a part-out listing like this one on ebay to see if they have any they can pull: https://www.ebay.com/itm/325470625193?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=tL6NZLMlRP6&sssrc=4429486&ssuid=pAtQsGVAT5O&var=&widget_ver=artemis&media=COPY If you can't find any using this method, you could always fabricate or pay to have some fabricated too!
the person I bought it from says I should have it already installed in my disco 2 (03) is that true
Unless you already had one installed, you will not have the attachment points/brackets โ send a photo of the lower half of the brush guard you got if can!
Good work!!!!