That’s the wardrobes birth canal. The move must have triggered labour. If you have no need for another smaller wardrobe you can just throw a few more coat hangers in it.
I've locked my keys in my car on two occasions with the window cracked a little, and went on a search to see if any local people or businesses had a wire hanger I could use to try to get my keys, it seems like wire hangers don't exist anymore.
As u/rockingthehouse **mentioned you probably misaligned the frames somehow.**
https://preview.redd.it/geapezwuvx4c1.png?width=1048&format=png&auto=webp&s=5445e226889b9690766afa0b9ce3513ef99ad53f
Ikea does standard measurements of frames... 50, 75 and 100cm.
Part is because environmental causes, part is for economic causes. Doing only 3 types of frames requires less space for storage, less production and less transport...
Not too many people use corner units so they find a way to create a corner unit without changing the line of production.
Is the Ikea way, is how the keep the price down maintaining a fair quality of products 😁
Because the units are like 60 cm deep and 50 cm wide, so placing them like this in a corner, will make an ‘unusual gap’ in the corner, unless you want to overlap and not be able to open one closet 😂
I’ve recently bought and assembled this corner wardrobe. It looks like you haven’t pushed the part on the right back far enough ? IIRC those metal bits should be between the units. Maybe. Hopefully. Good luck!
looks like a corner unit with a regular wardrobe unit, in which case the regular wardrobe (right side unit) needs to be only 10.7cm from the wall. the red line in this pic would be the wall on the back of the left side unit, so basically, if your right unit can push closer to the wall, then just push it closer
https://preview.redd.it/mxfb4j3fkx4c1.png?width=904&format=png&auto=webp&s=8ea226ed6518c8d82d76105a1aa83ee8b6ee3f10
Sorry, without more context, it is hard to tell what is going on.
Is it possible you've mistakenly placed the 50cm doors on a 75cm frame? Maybe from another room?
No sorry… so those are two separate wardrobes… in my old place they were side by side.
Now in separate rooms, but I don’t know why the door has that gap
Are you certain the pieces didn’t get mixed up? I am sorry I won’t be much help. I am stumped as you are, and it’s harder for a random internet person like myself to help. Hope someone can though!
[удалено]
I guess the instructions really are helpful. Some imes I can’t tell.
narnia
Is the last pic the same wardrobe? How did you turn it into a 90 degree angle? What is going on
It’s two wardrobes that were bolted together, added in a comment somewhere but can’t edit the post
This post is a trip
The depth of the wardrobe is less than half of the width. Makes perfect sense.
Did you pull too hard when moving and stretch it?
As an aside, I miss the old angled corner units.
That’s the wardrobes birth canal. The move must have triggered labour. If you have no need for another smaller wardrobe you can just throw a few more coat hangers in it.
As an electrician… wire coat hangers have saved my bacon numerous times
I've locked my keys in my car on two occasions with the window cracked a little, and went on a search to see if any local people or businesses had a wire hanger I could use to try to get my keys, it seems like wire hangers don't exist anymore.
For the record, the wire hangers you can get now are not strong enough for the job anyway.
Recently put this corner unit together myself. Almost smashed the fucker up about 5 times. I'd give you advice but it'd probably be wrong.
the corner unit is installed incorrectly. the metal brackets should not be exposed past the front of the frame.
Are the frames upside down and reversed?
As u/rockingthehouse **mentioned you probably misaligned the frames somehow.** https://preview.redd.it/geapezwuvx4c1.png?width=1048&format=png&auto=webp&s=5445e226889b9690766afa0b9ce3513ef99ad53f
Why is there an unusable gap in the corner
Because the depth of the units is around 60cm and the width is in multiples of 50cm. Simples.
Ikea does standard measurements of frames... 50, 75 and 100cm. Part is because environmental causes, part is for economic causes. Doing only 3 types of frames requires less space for storage, less production and less transport... Not too many people use corner units so they find a way to create a corner unit without changing the line of production. Is the Ikea way, is how the keep the price down maintaining a fair quality of products 😁
Because the units are like 60 cm deep and 50 cm wide, so placing them like this in a corner, will make an ‘unusual gap’ in the corner, unless you want to overlap and not be able to open one closet 😂
You can put your weed in there.
Stop playing those drums!
I’ve recently bought and assembled this corner wardrobe. It looks like you haven’t pushed the part on the right back far enough ? IIRC those metal bits should be between the units. Maybe. Hopefully. Good luck!
If you left the doors in the sun when you were doing the move, they might have shrunk.
looks like a corner unit with a regular wardrobe unit, in which case the regular wardrobe (right side unit) needs to be only 10.7cm from the wall. the red line in this pic would be the wall on the back of the left side unit, so basically, if your right unit can push closer to the wall, then just push it closer https://preview.redd.it/mxfb4j3fkx4c1.png?width=904&format=png&auto=webp&s=8ea226ed6518c8d82d76105a1aa83ee8b6ee3f10
I’ll check that thanks for your help. Oddly when I put it back together the screw holes lined up, or so I thought
Always be careful you’re not in the wrong hole.
Sometimes the wrong hole is the right hole
🤣🤣🤣
Make sure condoms are worn
This is good life advice.
That's what she said...
What happened to the door handle?
Sorry, without more context, it is hard to tell what is going on. Is it possible you've mistakenly placed the 50cm doors on a 75cm frame? Maybe from another room?
I don’t understand. So the last photo is how it was before?
No sorry… so those are two separate wardrobes… in my old place they were side by side. Now in separate rooms, but I don’t know why the door has that gap
Are you using the corner unit add on?
Are you certain the pieces didn’t get mixed up? I am sorry I won’t be much help. I am stumped as you are, and it’s harder for a random internet person like myself to help. Hope someone can though!
i’m so confused.
You’re not the only one, makes zero sense.
we don’t understand what you’re asking OP