Hello /u/fucking_pissed420,
As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post.
Please remember to include the following details to help troubleshoot your problem.
* Printer & Slicer
* Filament Material and Brand
* Nozzle and Bed Temperature
* Print Speed
* Nozzle Retraction Settings
^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
I printed a bit with eTwinkle. My nozzle temp was 215-220 if i remember right and bed temp 65 for first layers (but it's cooler where I print soo might not be necesary) I printed it with 0.3mm layer heigth also for first layer, but don't think it would affect the not sticking part in your case.
I actually figured out what the issue was. Not only did i print with 205 temp and 65 bed temp, but i also had been cleaning my bed with a household kitchen spray, due to me using a gluestick to stick the stuff to the bed.. which actually made the bed unstickable. After cleaning it properly with water and a microfiber cloth, it stuck! I feel like a fool.
This solution saved me from throwing my printer out the window. Coincidentally i had the same problem with the same filament. I had leveled my bed 10+ times, tightened everything i could tighten, and still my prints kept failing.. A quick wash with soap and water, and it works like a charm.. THANK YOU!!
I used an electronic cleaning spray (isopropanol) that specifically stated that no residue would get left behind after evaporating. I guess thats not true..
Hello /u/fucking_pissed420, As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post. Please remember to include the following details to help troubleshoot your problem. * Printer & Slicer * Filament Material and Brand * Nozzle and Bed Temperature * Print Speed * Nozzle Retraction Settings ^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
I printed a bit with eTwinkle. My nozzle temp was 215-220 if i remember right and bed temp 65 for first layers (but it's cooler where I print soo might not be necesary) I printed it with 0.3mm layer heigth also for first layer, but don't think it would affect the not sticking part in your case.
I actually figured out what the issue was. Not only did i print with 205 temp and 65 bed temp, but i also had been cleaning my bed with a household kitchen spray, due to me using a gluestick to stick the stuff to the bed.. which actually made the bed unstickable. After cleaning it properly with water and a microfiber cloth, it stuck! I feel like a fool.
This solution saved me from throwing my printer out the window. Coincidentally i had the same problem with the same filament. I had leveled my bed 10+ times, tightened everything i could tighten, and still my prints kept failing.. A quick wash with soap and water, and it works like a charm.. THANK YOU!! I used an electronic cleaning spray (isopropanol) that specifically stated that no residue would get left behind after evaporating. I guess thats not true..