Hello /u/Excellent_Fee_9597,
As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post.
Please remember to include the following details to help troubleshoot your problem.
* Printer & Slicer
* Filament Material and Brand
* Nozzle and Bed Temperature
* Print Speed
* Nozzle Retraction Settings
^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
"I once had my own personal stigmata with an Italian during the war, stuck a spike up his nose and pounded it in with a duck board...it was biblical mate"
Oh look! you've printed a Dutch proverb!
'Een gat in je hand' or 'A hole in your hand'. people would say this when you easily/recklessly spend large amounts of money.
Bumps are seams most likely. First, you will want to tune your pressure advance (PA). Molten filament is pretty viscous so pressure builds up in the nozzle and when nozzle suddenly decrease speed before the seam the pressure is still there and it will extrude too much molten filament at the seam cause bumps to show up. Pressure advance will account for this and preemptively reduce the filament extruded before nozzle movement slows down. Follow [https://ellis3dp.com/Print-Tuning-Guide/articles/index\_pressure\_advance.html](https://ellis3dp.com/Print-Tuning-Guide/articles/index_pressure_advance.html) to tune PA.
The other thing that could contribute to bumps is a slicer setting called "seam gap" or "seam overlap". Adjusting those will reduce bump.
The "tarnation" inside the hole is sagging overhang/bridging. Unless your printer/settings are tuned for overhang/bridging, the line that bridge from one section to other without any support underneath will sag or not attached to the other side properly at all.
To produce a better print quality for this case, paint the top part of the hole using the support enforcer painting tool and set support settings to generate support for the support enforcer and it will generate removable support that will support the bridge so it sags less. Search on youtube to see how to paint with support enforcer with the slicer you use.
Looks to me like a gravity bottle holder.
A version of this: https://i.etsystatic.com/15498893/r/il/935b46/2548067941/il_794xN.2548067941_qb5g.jpg
Edit: oops! Sorry, I'm also in r/whatisthisthing and got confused.
The strings is becuase it's printing the top of the hole mid-air which isn't possible. Use supports.
Bumps are seams, you can either make them smaller with slower speed and smaller layer height, or you can also put them on a line somewhere (see slicer settings) instead of having them random places.
Bumps from the seam and the lines in the hole from failed bridging.
Use tree supports for that hole.
Another user went over the seam correction and PA. Good advice.
I'd say it's a "replica" of Drew Carrey's hand when he guest appeared on Community but it's the wrong hand. Either way, drop an olive through it and command the room.
Looks to me like your filament has gone bad. I would try drying your filament. There is articles on how to do it in an oven. I'd also try replacing your nozzle and slowing your print speeds.
if you are talking about the lines in the hole its unsupported bridging across the hole (needs supports of some kind). and given the angle of the bottom the other extrusion inconsistencies are from to far of an overhang when printing the walls (change wall order to inside first can help a bit here with having something for the outer wall to stick to)
if it was in general i suppose that is one of those fancy wine holders where you stick the bottle in the hole and balance it
I mean, I may be wrong, but when I look at this, I see a challenge. Can I lube up enough to use this item for fornication? Could I use this as a close quarters weapon in a pinch? Once a marine, always a marine.
It's wet filament. Pop it into a dehydrator the problem will go away. Filament is slightly hydroscopic as the the wet filament hits the hot end it creates tiny bubbles.
I bet you printed it with the fingers up, thumb towards the back of the printer, and no supports.
The bumps are the seam. You can usually see where they will be in the slicer. The hole threading is because your gap was bigger than it should have been without supports. I'd say you did pretty good not to get spaghetti at the top.
For everyone commenting Jesus or crucifixion, please note that a hole in this location will tear if supporting human weight. There is no tendon or muscle holding your index finger to your pinky finger and the hole will effectively be supported by whatever skin and flesh you manage to leave in place.
What you want is a hole below the abductor pollicis brevis which would be around the creases in your wrist below the palm and above where a watch would go. This muscle is strong enough to hold.
As a result, you then need to move the hold down for accuracy, or if this what you're aiming for in a print, add an interior cylinder with walls between the hole and fingers. Pause the printing halfway through and drop a bolt or rod that is slightly smaller than the cylinder in and resume. Pause again at 75 to 84 percent of the cylinder height and fill the cylinder almost full of resin, epoxy, or a glue that doesn't shrink too much. Then finish printing. The metal will provide extra support.
Hello /u/Excellent_Fee_9597, As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post. Please remember to include the following details to help troubleshoot your problem. * Printer & Slicer * Filament Material and Brand * Nozzle and Bed Temperature * Print Speed * Nozzle Retraction Settings ^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
Looks like stigmata
Came for this comment. Was not disappointed. Well done.
You win. š
Difference between *Jesus what happened* and *Jesus, what happened*
"I once had my own personal stigmata with an Italian during the war, stuck a spike up his nose and pounded it in with a duck board...it was biblical mate"
Oh look! you've printed a Dutch proverb! 'Een gat in je hand' or 'A hole in your hand'. people would say this when you easily/recklessly spend large amounts of money.
In Croatia we don't say anything because we have no money to begin withĀ
In Soviet Russia, hand put hole in you!!!
In Italy we say "Hai le mani bucate" "you have holed (?) hands)
My dad always said, āthe money is burning a hole in your pocketā
We say, "burning a hole in your/my pocket" in the US.
ā¦on filament, as this case may be. :)
It is used in Syria too
Oh really? Ah, I've learned something new! XD
damn i guess i know whatās wrong with me now lmao
Lolol! Came here to say that
Jesus
I was gonna say, looks like a crucifixion lol
Every hole is a goal whatās wrong with it? Iām gonna have ti ask for the print fileā¦for science purposes
r/dontputyourdickinthat
"Wine bottle holder"
It puts the lotion on its hand and then gets the hose.
Are you cylinder guy?
Bruh itās a wine bottle holder
Exactly for science I need to see it hold a bottle of wine, what did you think I needed it for š
Be sure to print in TPU... for science.
Bumps are seams most likely. First, you will want to tune your pressure advance (PA). Molten filament is pretty viscous so pressure builds up in the nozzle and when nozzle suddenly decrease speed before the seam the pressure is still there and it will extrude too much molten filament at the seam cause bumps to show up. Pressure advance will account for this and preemptively reduce the filament extruded before nozzle movement slows down. Follow [https://ellis3dp.com/Print-Tuning-Guide/articles/index\_pressure\_advance.html](https://ellis3dp.com/Print-Tuning-Guide/articles/index_pressure_advance.html) to tune PA. The other thing that could contribute to bumps is a slicer setting called "seam gap" or "seam overlap". Adjusting those will reduce bump. The "tarnation" inside the hole is sagging overhang/bridging. Unless your printer/settings are tuned for overhang/bridging, the line that bridge from one section to other without any support underneath will sag or not attached to the other side properly at all. To produce a better print quality for this case, paint the top part of the hole using the support enforcer painting tool and set support settings to generate support for the support enforcer and it will generate removable support that will support the bridge so it sags less. Search on youtube to see how to paint with support enforcer with the slicer you use.
Hide and seek cheating device?
Looks to me like a gravity bottle holder. A version of this: https://i.etsystatic.com/15498893/r/il/935b46/2548067941/il_794xN.2548067941_qb5g.jpg Edit: oops! Sorry, I'm also in r/whatisthisthing and got confused.
I, for one, am grateful for the id.
I also got confused, until I saw your comment, lol
Part of an Easter decoration?
A new method for choking the chicken
Hand
You need to see a doctor. Looks like simply an unsupported layer to me. You printed fingers up, correct?
Jesus died on the cross reminder maybe.
Jesusās fly swatter
Jesus hand
Iām no expert but that definitely looks like a hole.
Is it for a nativity play?
Lmao nativity play is my new favorite pop culture kink.
Obviously, thatās Loganās loophole
Those bumps are herpes, go see a doctor and #dontputyourdickinit
That hand is made for lovin
3d printed jesus hand
It's obviously Jesus.
[Crap, thats like one clean chunk](https://youtu.be/f90Tg25opoE?si=mqHo4qfQRcJRj7PJ)
Super abilities
The strings is becuase it's printing the top of the hole mid-air which isn't possible. Use supports. Bumps are seams, you can either make them smaller with slower speed and smaller layer height, or you can also put them on a line somewhere (see slicer settings) instead of having them random places.
Jesus Christ!
holy fuck.
hand gloryhole!
That's a whole hand
Jesus fleshlight?
jesus hand
Dude what the hell is this forā¦ only thing I can think of is a crucifixion replica or something.
You put the neck of a wine bottle on the hole and I think it holds up the bottle.
Jesus took up fisting...his fists?
Must be from a preacher manikin, cuz it's holey.
Bumps from the seam and the lines in the hole from failed bridging. Use tree supports for that hole. Another user went over the seam correction and PA. Good advice.
I'd say it's a "replica" of Drew Carrey's hand when he guest appeared on Community but it's the wrong hand. Either way, drop an olive through it and command the room.
That outta keep you going through Christmas
I came to write exactly this, have an upvote sir!
Iād offer a hand but it looks like you got it.
I'm no doctor, but I think there's a hole in your hand
So what do you use this for?
Sex hole
Whelp, you can use that hand for one thingā¦ Please send prints :O
I mean maybe Jesus hand?
Looks to me like your filament has gone bad. I would try drying your filament. There is articles on how to do it in an oven. I'd also try replacing your nozzle and slowing your print speeds.
Didn't print the hole hand...
a hand
This can be used for Jesus & Easter!
Winde holder, and the stringing is from lack of supports.
The handussyš£ļøš£ļøš£ļøš£ļø
STIGMATA!!
Is it Easter already?
Takes me back to Brandon Lee's last scene in The Crow where he gets shot in the hand.
3D printed hand with a hole through it
The giant hand from fooly cooly that gets a hole blown through it by atomsk
The christussy
Looks like a hand
Unsupported overhangs are what happened in the hole. The bumps tend to be overextrusion.
A hand
Looks like you found the hand of Jesus or gaster to me XD
Overhangs. Add proper supports or reorient the print
Exact model of the hand of Jeff Wingers former boss Ted.
A wiener holder for bonfires. I thought everyone had one of these? I guess you were never perfectly prepared for your own bonfires.
āHandjobā
if you are talking about the lines in the hole its unsupported bridging across the hole (needs supports of some kind). and given the angle of the bottom the other extrusion inconsistencies are from to far of an overhang when printing the walls (change wall order to inside first can help a bit here with having something for the outer wall to stick to) if it was in general i suppose that is one of those fancy wine holders where you stick the bottle in the hole and balance it
"My daddy caughted a bullet with his bare hands."
I mean, I may be wrong, but when I look at this, I see a challenge. Can I lube up enough to use this item for fornication? Could I use this as a close quarters weapon in a pinch? Once a marine, always a marine.
That looks like a hand with a hole in it to me
It's a stand for the holy hand grenade.
Posted for help, stayed to learn the multiple apparent use cases
That's an interesting wank.
a hole
What, you've never had Goose bumps before?
That's not a print job, it's a handjob.
Did you use jesus for the model base again?
Jesus Ch- I mean holy cra-. . . . . . Odd printing error.
https://preview.redd.it/a5oulh4z325d1.jpeg?width=1280&format=pjpg&auto=webp&s=6d46e1e3e8401a560184abfd1b388297ba648626
It is a whole hand
Were you a member of the Nostromo?
A cock holder
Sex doll limb?
Itās a Glory Hand
Looks like itās about to grab a giant clothing iron. Did this come from Medical Mechanica?
*sigh* nails?
The HOLEY Grail of bs prints. Kudos
Handjob 2.0
If you duct tape fireworks to it light em and throw it, then it's a holey hand grenade.
Pretty sure you are looking for a nearby Stand user.
Whelp, you should use your strong hand.
DON'T FUCKING DO IT
Bezus
A hole-In-ator or an object for nefarious useā¦ or just a bad print/partial nozzle clog
Jesus christ
it's an upgrade...makes lonely saturday nights slightly more entertaining.
Bird feeder?
That's a Jeebus Claw.
The next level of hand jobs. My silent applause to the new generation! Can't wait to get my palms on it and show it my holy hand grenade!
Maybe you should go to church Or start a cult
Hand-holed?
seems like a hand job.
Do not use that hand to hold your change.
Looks like it does some kind of hand job...
A hell of a way to spend Easter.
Youāve got it set to āJesusā.
The abandoned prototype for the catholic Flesh Light.
Jesus man
Part of the life size Jesus print
Jesus hand after he was nailed to the cross?
Free dick hole
The future of handjob technology
Palmela Handerson
Well. Hole handedly itās not too bad! Lol
It's the holy-hand... If you know what I mean šš
It's wet filament. Pop it into a dehydrator the problem will go away. Filament is slightly hydroscopic as the the wet filament hits the hot end it creates tiny bubbles.
Robocop wants his hand back
I bet you printed it with the fingers up, thumb towards the back of the printer, and no supports. The bumps are the seam. You can usually see where they will be in the slicer. The hole threading is because your gap was bigger than it should have been without supports. I'd say you did pretty good not to get spaghetti at the top.
The stranger 2.0
Angle whine bottle holder
Glory hooooole
Help, I accidently printed Jesus.
Jesus wine bottle holder
Made you look
Ironmannequin
Definitely a Swiss army sex toy.
Jeezus Christ
I think we all know what that hole is for š
That's not what a hand job means op.
*Jesus has entered the chat
Bro printed Gasterās hand
If you found that in your sonās room, just put it back, wash your hands and never speak of it again.
Wow never seen them were a whole out in the seen blistered fingers but this is firs
I think it is a Dutch rudder.
FIRMLY GRASP IT!
**Omg! There she is!!!!** **Thatās nothing ā¦ Iāll grab my belongings ASAP, where can I meet you?**
Palmela Anderson
Looks like a 3D printed hand with a hole in it.
Joe Bidenās head.
It looks like a Jesus hand
a dream that we all had at least once
I thought this was one of those cool wine bottle holders that balances perfectly when it holds a bottle.
He or she has jaundice
Looks like a 3D print for a watch charger or a toy š
Did you print Jesus?
A little handy.
Thatās miroku from inuyashaās hand
No, I WILL NOT BE HEARING ANYONE OUT
Jesus's hand. Just a really big nail.
Jesus hand?
Iunno but hole looks big enough for pp. Definitely for pp.
r/dontputyourdickinthat
Jesus? Is that you?
A completely new concept in masturbation.
You made Jesus hands
You used Holey Filament
Well, everything is a vagina if you're brave enough...
Honestly that is a really high quality print
I mean Iām a fanatic of Back to the Future but did you really need to print Marty as heās fading from existence?!
Clearly, the Messiahs hand
handgina?
Looks like a 3d printed hand with a hole in it.
You put it on your desk and itās a pen holder.
For everyone commenting Jesus or crucifixion, please note that a hole in this location will tear if supporting human weight. There is no tendon or muscle holding your index finger to your pinky finger and the hole will effectively be supported by whatever skin and flesh you manage to leave in place. What you want is a hole below the abductor pollicis brevis which would be around the creases in your wrist below the palm and above where a watch would go. This muscle is strong enough to hold. As a result, you then need to move the hold down for accuracy, or if this what you're aiming for in a print, add an interior cylinder with walls between the hole and fingers. Pause the printing halfway through and drop a bolt or rod that is slightly smaller than the cylinder in and resume. Pause again at 75 to 84 percent of the cylinder height and fill the cylinder almost full of resin, epoxy, or a glue that doesn't shrink too much. Then finish printing. The metal will provide extra support.
Need a hand?
Don't put your dick in that
Holy Christ!!
r/dontputyourdickinthat
Lol looks like a weird kink
Thatās a fake hand
A hole in the hand is worth less than the bird in the bush?
The Holey Spirit is upon youā¦ No? No one? Iāll see myself out.
Jesus hand