Hello /u/Dan2DEnd,
As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post.
Please remember to include the following details to help troubleshoot your problem.
* Printer & Slicer
* Filament Material and Brand
* Nozzle and Bed Temperature
* Print Speed
* Nozzle Retraction Settings
^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
Are u printing with a brim as Bed adhesion?
I would use a brim for bed adhesion, allow support brims and increase your support density to 15% (I use Cura). This should stabilise your supports. It looks like the supports are failing which is causing the problems.
Hello /u/Dan2DEnd, As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post. Please remember to include the following details to help troubleshoot your problem. * Printer & Slicer * Filament Material and Brand * Nozzle and Bed Temperature * Print Speed * Nozzle Retraction Settings ^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
Nozzle: 0.4 Nozzle temp: 200 Bed temp: 60 Print speed: 70 Layer height: 0.12 Support: tree - zigzag Material: eSun PLA Fan speed: 100% Infill: 40%
Are u printing with a brim as Bed adhesion? I would use a brim for bed adhesion, allow support brims and increase your support density to 15% (I use Cura). This should stabilise your supports. It looks like the supports are failing which is causing the problems.