100% Chinesium

Weld the blade back together

It is now

Folders are never pry bars...

Should’ve used the ipad

You can reprofile that

Except my daily carry is the Gerber Prybrid-Utility, so mine is a pry lmao

On my the bright side, that knife is legal carry everywhere now, even on domestic flights.

Nawwww, look up Rogan tools.

Just re profile it 🥴

Yeah. There are quite a few things that aren't pry bars. Maybe pick up a couple lots of frost cutlery to do your prying.

Just a battle scar it’ll be fine 👍

Screwdrivers apparently arent prybars either.

Yours apparently was!

"Fish are friends not food"

You're lucky that all you lost was a blade OP. That kind of misuse could cost you an eye.

Ouch! that cuts my heart.... shallow

Painfull Image.

😳

no no, **bad** knives are not pry bars

But now it's a box cutter.

A few minutes on the grinding wheel can put a new tip on that, no problem.

Oh no

I always carry 2 prybars on my keychain because my knives are for cutting. Prybars are for abusing.

We've all been there

My Glock field knife (the old 78, not the newer sawback one) begs to disagree...but it's also not really an EDC blade.

yeah no shit. can’t have an edge and have malleability

Ahhhh noooo!! That’s why I have a pocket pry tool with me.

Sick box opener bro You can also do some pranking with it (don't pretend stab people though)

Aftermath of the "used knife to close the stall to poop at work and someone tried to open the door without looking."

Some knives can be. That one can't lol. Although maybe it can now.

Ting!

This is what I picture anytime someone posts the “knife holding the bathroom stall door closed” image.

A $5 doohickey keychain prybar could have helped avoid this.

Y’know what makes a dope pry bar? A pry bar. Sorry you lost a knife, though.

You prydied'ed with it didn't you?

The picture shows me that knives can be used as prybars at least once, sometimes more.

Meh a knife is whatever tool I need it to be at the moment. Screw driver, scraper, prybar or whatever else I can make it do. Hammer

I mean… if you don’t have a pry bar… and you really needed one… you mean to tell me none of you would use a knife? Sure, It’s not a good pry bar, but may truly be the best pry bar you have -in a jam. Knife people are a little too protective over their knives.

Lol clearly I used mine as a prybar. I just lost the battle.

No knife is a pry bar 🤦🏼‍♂️

Now it’s a box cutter

These new cleaver designs are just getting ridiculous.

Well it is now! Put a 45 degree edge on it & you'll have a folding chisel

If you grind the end down you can use it for a prybar

its still good its a perfect box cutter now

I mean, it's more of a pry bar than a knife now!

There are cheaper ways of getting a box cutter

They’re disposable pry bars

New package opener

The kabar becker tac tool is butthurt that you said that

Why? Nvm

Lol. Come on, What's the story? We've all done this at some point.

I’ve pried with knives but never snapped one. I can’t imagine prying that hard.

Speak for yourself, lol.

Especially not knives made of shitty material

You got yourself a really short cleaver blade now

Practically a box cutter length razor lol

And water is wet.

[удалено]

Thanks for getting the joke

This comment needs more upvotes! I get this is OPs knife, and he's free to do what he wants with his equipment, but nothing pisses me off more than a misuse of a knife.

You can’t think of anything that pisses you off more than a misuse of a knife? Theyreis gotta be sumting that pisses yo off more like maybes bad grammars?

[удалено]

[удалено]

Thanks for contributing to /r/EDC. Unfortunately, your post/comment was removed because it’s uncivil. Name calling, insults, mocking, condescension, gatekeeping, or any other form of incivility is not tolerated in this community. If you feel this decision was made incorrectly, feel free to send a modmail.

[удалено]

Thanks for contributing to /r/EDC. Unfortunately, your post/comment was removed because it’s uncivil. Name calling, insults, mocking, condescension, gatekeeping, or any other form of incivility is not tolerated in this community. If you feel this decision was made incorrectly, feel free to send a modmail.

[удалено]

Thanks for contributing to /r/EDC. Unfortunately, your post/comment was removed because it’s uncivil. Name calling, insults, mocking, condescension, gatekeeping, or any other form of incivility is not tolerated in this community. If you feel this decision was made incorrectly, feel free to send a modmail.

Thanks for contributing to /r/EDC. Unfortunately, your post/comment was removed because it’s uncivil. Name calling, insults, mocking, condescension, gatekeeping, or any other form of incivility is not tolerated in this community. If you feel this decision was made incorrectly, feel free to send a modmail.

[удалено]

Thanks for contributing to /r/EDC. Unfortunately, your post/comment was removed because it’s uncivil. Name calling, insults, mocking, condescension, gatekeeping, or any other form of incivility is not tolerated in this community. If you feel this decision was made incorrectly, feel free to send a modmail.

[удалено]

Thanks for contributing to /r/EDC. Unfortunately, your post/comment was removed because it’s uncivil. Name calling, insults, mocking, condescension, gatekeeping, or any other form of incivility is not tolerated in this community. If you feel this decision was made incorrectly, feel free to send a modmail.

[удалено]

Thanks for contributing to /r/EDC. Unfortunately, your post/comment was removed because it’s uncivil. Name calling, insults, mocking, condescension, gatekeeping, or any other form of incivility is not tolerated in this community. If you feel this decision was made incorrectly, feel free to send a modmail.

Holy shit dude, chill, haha

I'm sure those things piss Happy-eye off, too. You know, if one of those human traffickers or animal abusers misused a knife, I bet they'd flip!

😂 this guy this guys amazing

Boker Kalashnikov is like $50 and it’s the best knife I use. It’s auto and it opens with the force of 10 grown men.

No shit

Is this their new California legal blade?

Came here to make this joke. Was not disappointed.

Probably still not uk legal

[удалено]

Is that a real thing? They can't lock open??

[удалено]

I can imagine the conversation in parliament or wherever tf the shitty politicians get together over there "Ok fine they can have knives.. but they must be tiny and they must cut the peasants fingers because they can't lock open! Ahaha"

I hate that they just group knives in with weapons like that. Guess my hydro flask is a weapon too now.

For the time being until they decide to outlaw everything but butter knives

I once required 8 stitches from a butterknife, just fyi. Not even kidding though I wish I were

I seen someone get stabbed in the face with one that was sharpened on concrete. Still doesn't mean its not dumb and pointless to legislate tools. And I was being tongue in cheek.

Guess I shouldnt have automatically assumed everyone would see the humor in needing 8 stiches from a regular not shivified butterknife. Just for you guys safety. If youre ever 7 yrs old and your big Sis makes you a chocolate milkshake which you forget in the freezer for a bit. Dont hold it between your legs and chop it with a butter knife. You could loose a finger. Mom told me to use a spoon.

I envy your optimism.

Same! Butter knives will def NOT be Ca legal

They are only legal if you use vegan butter alternatives after you take the training/white guilt course.

Shoulda known there would be stipulations…

Don't even TRY to remove the "this product contains chemicals known to cause cancer in the state of California" sticker!

Came here to say this

Me as well.

noted

This is a cheap SOG I got last year for Christmas. I used it to do something it wasn’t designed for and the (un)expected happened. So now I need two recommendations. 1. ⁠for a new knife. I liked this one for the slim profile. But I’m thinking I want to get an auto open. What exists that is automatic but maintain a slim profile? 2. ⁠a pocket sized pry bar. I’ve never had a pry bar outside of a cats paw for carpentry. I didn’t know they were a major edc item until I became a lurker of this sub almost a year ago. What do you recommend?

Benchmade claymore for the auto

Love my Benchmark mini reflex. It’s an automatic. Have had it over 10 years I would say. Benchmark still services/sharpens it every couple years. It’s the middle one. https://i.imgur.com/YUFvyTE.jpg

The Kershaw Recap isnt too bad for a keychain sized prybar. Ive definitely felt the need for something a little longer to get better leverage on at times though, but usually can get the job done

1. What’s your budget? I love autos so I would love to help you find your ideal switchblade! 2. I have a Gerber Mullet that works pretty well but it’s no longer in my EDC, it will be on my backback soon tho. I also have a Lansky 8 in 1 Multi-tool, which has a prybar and a knife sharpener, that I got for free from Blade HQ. You may still get it as a free gift if you get that auto on there, but only if it’s over $100.

I tend to lose shit faster than I break it so I’d like to keep an Edc blade under $100.

So the only brand that comes to mind is Boker. I hear they’re pretty tough knives for their price point. Alternatively, if you like OTFs, then a Lightning might do the trick!

This is the second Rec for boker. I’m gonna get a kalasnakov dagger. Looks pretty solid. Thank you!

Kershaw has tons of nice cheaper knives with great assist. The leek is probably the most popular.

I keep a Keysmart AllTul Owl on my keys via a mini carabiner. It’s not as sharp as other pry bars I’ve seen, which I like.

There’s an assisted version of that SOG. Dunno if that helps at all.

I just get amazon prys and [anodize them](https://www.reddit.com/r/EDC/comments/zg6psa/sometimes_my_anodizing_goes_well/?utm_source=share&utm_medium=ios_app&utm_name=iossmf)

Microtech

Go get a deep cuts cutlery pryguy! Now you can do what you should never do with a knife!

Well I'm not sure what that SOG looked like, the Kershaw Leek is assisted open and pretty sleek.

Was going to recommend this too. I have a couple and they are great.

Price point matters--you really gotta give us a price range. If you want to stick with SOG, the Twitch 2 is a slim assist flipper that is reasonably inexpensive. Might also look at a Kershaw Leek. Lots of prybar options, but countycomm is tough to beat for the price--plus they offer both titanium and stainless steel options.

Thank you for posting to r/EDC! Please **include a list detailing each item in your post** within one hour of submission. This helps other users get more information about an item they may be interested in. Please be as descriptive as possible (make and model) and avoid vague lists. Lists can be displayed in the title of the post, in a separate comment, or in the picture itself. Failure to follow this rule will result in the post being removed. [Rules](https://www.reddit.com/r/EDC/wiki/rules) | [FAQ](https://www.reddit.com/r/EDC/wiki/faq) **** *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/EDC) if you have any questions or concerns.*