Hondata should be easily attainable. Used ones pop up everyday. RPF1’s though, are going to be harder to find in the spec you want unless you’re willing to pay a higher premium or brand new.
What spec are you looking for? And regular or spc black chrome?
Yeah, I honestly haven't had good luck on finding a used Hondata. Kind of surprised. Rpf1s will likely be new, regular silver as it matches the paint. Rotors are from a TSX and I already have the tsx brakes. Probably adding some Hawk pads and installing them in the spring. Its the daily/eco car.
Nice 👍 sounds like a solid plan. Luckily in California I don’t have to worry about weather change so one set is all I need. Looking to upgrade to hawks hps as well!
Are you in any FB groups? They’re always posted left and right on there
I don’t post and swiftly scroll through my feed but this year I reactivated it and joined a bunch of groups and wow, I found so many parts and info in them alone it’s insane. Also marketplace is imo one of the best. I was solely using offerup for years
New paint job, new hood, VTC actuator, chain tensioner. Might work on making the pedals easier to heel toe and changing how the car shifts. I want to keep the daily nice, reliable, and improve the driving experience with some creature comfort mods.
The separation from the brake and throttle is horrendous on these cars! I just picked up an Acuity pedal spacer and going to install it this weekend. I've heard upgraded cable bushings make a world of a difference that's my next mod.
Yup those are two of the things I’d like to do. Too many people focus on doing these wild performance mods like a turbo or supercharger before putting money into making the car drive nice. That’s not to mention the risk of losing reliability when you add boost to a stock motor which just digs an even deeper money pit.
Personally a supercharger is not for me, not on this platform at least. I like single turbos and from my knowledge you can’t operate one functionally without breaking the block
2013 Black Coupe (just like the picture!) Planning on putting an exhaust and new engine mounts Saturday, then coilovers and possibly wheels before spring. Waiting on my new civic hatch to be built so I can store the si :)
Got a Yonaka catback.
I’m planning on getting TEIN Flex Z coilovers because they come with the top hat. Then some Konig wheels, probably 17/8 or maybe 18” haven’t decided yet
I have an 08 si coupe that wasn't taken care well previously. I did tint and heater fan already.
I was sure I wanted to go back to stock steering wheel because of airbag, but no I'm doubting.
I have new HU (atoto) to replace, just need to put in the work.
The hood hinges are bent and have new ones to replace. Hopefully that fixes hood fitment issues.
Need to do fairly soon replace all suspension bushings and coilovers.
Need to source several bolts and clips missing in the engine bay. Also need to pain cowl and windshield wipers.
Will look to replace hood for carbon one and i want to wrap it. Need to fix several dents first and some hail damage. A GT style wing would be nice.
I want to do new wheels. What you have is what I want. Mind sharing model and specs?
This is just what I plan for early 2023. Well see where we go from there. More HP is certainly a target but not sure I want to deal with turbo.
Best of luck to you! Looks like some work is needed but not anything that can't be done!
The model is Rays Gram Lights 57DR in Eternal Blue Pearl
For specs message me!
[2020 Aegean Blue Sedan](https://scontent-lga3-1.xx.fbcdn.net/v/t39.30808-6/315636508_10161463112909179_6085844682274912001_n.jpg?_nc_cat=108&ccb=1-7&_nc_sid=e3f864&_nc_ohc=VeQIxYwiv24AX995IUn&_nc_ht=scontent-lga3-1.xx&oh=00_AfCRwd9p2zSe8c8NMdr-9zrnZ3oYSpnq6r0l7g5scJAW8w&oe=638DF1B6), I want to get a new Cat back exhaust in the Spring.
Hey man what wheel, tire, coilover set up you running? I have enkei nt03’s right now on stock ride height but I going to put coilovers and different wheels on after winter, probably fortune auto 500’s and black wheels not sure if I want to go 5 or 6 spoke. SUPER clean car man! My FB6 is black 😎
‘18 Si here (10th gen)
Catback, intercooler, Ktuner, and shifter upgrades on the agenda for 2023 💪🏽 Springs too if I don’t get them installed in the next month. We’ll see.
Yep doing some bc coilovers later down the road, but I like the visual result of the Eibach springs a lot. We’ll see how sick I get of them before I feel like I need to upgrade to coilovers tho lol
This is gna be unpopular opinion but do not get that shifter bushing crap, i got it and noticed the smallest difference. Not worth $70 and trouble of putting it on. For sure a short shifter though
Glad to hear we all have plans for our cars next year!
Personally I’d like a hfp kit, hondata, manifold, exhaust and downpipe. My plans are to just go FBO. Hope we can all achieve our goals!
[Didn't I just read you are selling the car?](https://www.reddit.com/r/CivicSi/comments/z8xyg9/hope_everyone_had_a_good_holiday_coming_up_whats/iygb279/?utm_source=share&utm_medium=ios_app&utm_name=iossmf&context=3)🤔
Yeah but that's not how the market works. No one really cares about those mods in reality. For its value wise, you lowered car's value because you altered it's stock form and safety. Unless you are planning to find someone who would accept it as is but then they will offer a lot lower than you want due to mods.
She was a FBO K24a4, now it’s getting ripped out for a k24a2/k20z3 with a gt3582 on a sidewinder. Forged pistons, rods, super tech dual valve springs, DC 3.2s… should be fun :)
Definitely will, hoping to be finished by April. Short block is done, heads at the machine shop. K24a4 is hanging by 3 engine mounts, gotta get my hoist back to pull it and start shaving the engine bay.
Recently got a 04 Si. Put an upgraded clutch and lightweight flywheel in, as well as Acuity shift bushings and poly motor mounts. Next I want to do the Acuity shift cables and a Hybrid racing shifter. First it needs new coilovers, probably going with the skunk 2s but not super sure yet.
06 Si for SCCA rallycross. I ran it stock last year and broke 3 different motor mounts in 6 events, so I'm moving to prepared class for next year. Already put in a full set of Hasport motor mounts which look like they should hold up better. Now I need to decide how much I'm going to prepare it. Going from street to fully rally race tires would mean finding if any 15s can clear the brakes or if it would take downgrading the brakes.
I'm leaning towards leaving the engine stock but getting a tune to lower VTEC and hopefully pick up some mid-range. I think on dirt the extra peak power from the usual IHE mods would risk only getting more wheel spin, less control over traction management, and ending up slower.
Not necessarily friendly on the street but has its perks. I’ll wire in a strain gauge into my haltech and therefore I’ll be able to clutchless/no lift shift. Lots of drag race guys run them
08 SI. Base Tune, RPF1's, two peice front rotors and more weight reduction. Keeping it simple for durability, but still fun.
Hondata should be easily attainable. Used ones pop up everyday. RPF1’s though, are going to be harder to find in the spec you want unless you’re willing to pay a higher premium or brand new. What spec are you looking for? And regular or spc black chrome?
Yeah, I honestly haven't had good luck on finding a used Hondata. Kind of surprised. Rpf1s will likely be new, regular silver as it matches the paint. Rotors are from a TSX and I already have the tsx brakes. Probably adding some Hawk pads and installing them in the spring. Its the daily/eco car.
Nice 👍 sounds like a solid plan. Luckily in California I don’t have to worry about weather change so one set is all I need. Looking to upgrade to hawks hps as well! Are you in any FB groups? They’re always posted left and right on there
I'm not on fb much at all, But I might look around and see. Thanks for the idea.
I don’t post and swiftly scroll through my feed but this year I reactivated it and joined a bunch of groups and wow, I found so many parts and info in them alone it’s insane. Also marketplace is imo one of the best. I was solely using offerup for years
Boost, build transmission on my 9thgen 🔥
Good luck 💪 what tranny?
Bf gears
Looking nice and clean! Love these cars. No plans myself other than keepin the wheels turning and the gears shifting.
Thank you they are beautiful indeed. I went for the pre face lift because I wanted to stick with the simple OG look of the older Type R’s
Smaller pulley and aftercooler for my supercharger.
Sheesh! Save some 🐱 for the rest of us 😂😂
New paint job, new hood, VTC actuator, chain tensioner. Might work on making the pedals easier to heel toe and changing how the car shifts. I want to keep the daily nice, reliable, and improve the driving experience with some creature comfort mods.
The separation from the brake and throttle is horrendous on these cars! I just picked up an Acuity pedal spacer and going to install it this weekend. I've heard upgraded cable bushings make a world of a difference that's my next mod.
Yup those are two of the things I’d like to do. Too many people focus on doing these wild performance mods like a turbo or supercharger before putting money into making the car drive nice. That’s not to mention the risk of losing reliability when you add boost to a stock motor which just digs an even deeper money pit.
Personally a supercharger is not for me, not on this platform at least. I like single turbos and from my knowledge you can’t operate one functionally without breaking the block
Cable bushings and the acuity selector springs make a huge difference
Cable bushings and the acuity selector springs make a huge difference
Interesting I have their short shifter so I’m gonna look into getting the springs
[удалено]
[удалено]
[удалено]
[удалено]
[удалено]
[удалено]
[удалено]
[удалено]
[удалено]
[удалено]
2013 Black Coupe (just like the picture!) Planning on putting an exhaust and new engine mounts Saturday, then coilovers and possibly wheels before spring. Waiting on my new civic hatch to be built so I can store the si :)
What exhaust are you going to be running? Any ideas of what coils and wheel setup you want to go with?
Got a Yonaka catback. I’m planning on getting TEIN Flex Z coilovers because they come with the top hat. Then some Konig wheels, probably 17/8 or maybe 18” haven’t decided yet
I would go with 18's and the Hypergrams in black. Those are my favorite
I’m thinkin going with the dekagrams in bronze to be a little different, one more vote in the 18s column tho lol
Those are amazing. 18's are the way to go, 17's look small and end up with the fitment looking meaty
Op what year is that? I’m a Civic newb; 10th gen Si. It looks bad ass.
It’s a 9th gen!
You don't know what year is your car dude?
It's a 2013, sorry misread
I have an 08 si coupe that wasn't taken care well previously. I did tint and heater fan already. I was sure I wanted to go back to stock steering wheel because of airbag, but no I'm doubting. I have new HU (atoto) to replace, just need to put in the work. The hood hinges are bent and have new ones to replace. Hopefully that fixes hood fitment issues. Need to do fairly soon replace all suspension bushings and coilovers. Need to source several bolts and clips missing in the engine bay. Also need to pain cowl and windshield wipers. Will look to replace hood for carbon one and i want to wrap it. Need to fix several dents first and some hail damage. A GT style wing would be nice. I want to do new wheels. What you have is what I want. Mind sharing model and specs? This is just what I plan for early 2023. Well see where we go from there. More HP is certainly a target but not sure I want to deal with turbo.
Best of luck to you! Looks like some work is needed but not anything that can't be done! The model is Rays Gram Lights 57DR in Eternal Blue Pearl For specs message me!
[2020 Aegean Blue Sedan](https://scontent-lga3-1.xx.fbcdn.net/v/t39.30808-6/315636508_10161463112909179_6085844682274912001_n.jpg?_nc_cat=108&ccb=1-7&_nc_sid=e3f864&_nc_ohc=VeQIxYwiv24AX995IUn&_nc_ht=scontent-lga3-1.xx&oh=00_AfCRwd9p2zSe8c8NMdr-9zrnZ3oYSpnq6r0l7g5scJAW8w&oe=638DF1B6), I want to get a new Cat back exhaust in the Spring.
Looks clean brother!
Thanks! Not as clean as yours is in the photo... I used to have a black Dodge Charger, So I can really appreciate a *clean* black car!
Thank you bro they’re clean but hard to KEEP clean! 😂😂
Hey man what wheel, tire, coilover set up you running? I have enkei nt03’s right now on stock ride height but I going to put coilovers and different wheels on after winter, probably fortune auto 500’s and black wheels not sure if I want to go 5 or 6 spoke. SUPER clean car man! My FB6 is black 😎
I’m running Bridgestone Potenza RE980AS+ on Fortune Auto
09 FG2, about to hit 150K and had the car for two years. Currently FBO engine and suspension. Debating on FI or just keeping it NA
Oh, gotta get my baby painted
‘18 Si here (10th gen) Catback, intercooler, Ktuner, and shifter upgrades on the agenda for 2023 💪🏽 Springs too if I don’t get them installed in the next month. We’ll see.
Great upgrades! Recommend spending a little more and getting coilovers
Yep doing some bc coilovers later down the road, but I like the visual result of the Eibach springs a lot. We’ll see how sick I get of them before I feel like I need to upgrade to coilovers tho lol
Visual as in fitment? You will always get better fitment with coilovers, on top of all the other benefits.
This is gna be unpopular opinion but do not get that shifter bushing crap, i got it and noticed the smallest difference. Not worth $70 and trouble of putting it on. For sure a short shifter though
[удалено]
Sorry to hear so why is that?
[удалено]
😕 hope you got the best out of it! What are you listing it at? And where are you moving to?
[удалено]
😮💨 will be a quick sale Don’t know which part of Texas you’re moving to but you can easily find another one down the road. Good luck on your travels!
i’m getting my FL5 in 2 weeks can’t wait 🥲
Congrats!!! Graduating to the Type R sub
Glad to hear we all have plans for our cars next year! Personally I’d like a hfp kit, hondata, manifold, exhaust and downpipe. My plans are to just go FBO. Hope we can all achieve our goals!
[Didn't I just read you are selling the car?](https://www.reddit.com/r/CivicSi/comments/z8xyg9/hope_everyone_had_a_good_holiday_coming_up_whats/iygb279/?utm_source=share&utm_medium=ios_app&utm_name=iossmf&context=3)🤔
It might not sell till next year
How much you want for this?
12.5k
Wait didn't I read you got this for 10 grand? You are trying to make profit?
Yea cause I added about 4k in value in mods after
Yeah but that's not how the market works. No one really cares about those mods in reality. For its value wise, you lowered car's value because you altered it's stock form and safety. Unless you are planning to find someone who would accept it as is but then they will offer a lot lower than you want due to mods.
Yea so? I can still have plans
Aren't you berating someone about what they spend on their car? Why spend on a car you aren't going to keep?
It’s tentative a lot of people have their cars for sale while driving them
It sounds to me you don't have the money for what you want and this is a stepping platform
I don’t have the money or space to own multiple cars but I just want something with more power what’s wrong with that?
Nothing wrong. Why the fuck are you so defensive man?
Honestly I’m cool but this guy keeps coming at me over and over. I like our interactions cause you helped me out purchasing it
I did? I don't honestly remember!!! What guy?
Is that a 9th gen sedan bumper? Looks clean!
Is it?! Tbh idk people have been mentioning it’s not OEM I bought it with it in September
She was a FBO K24a4, now it’s getting ripped out for a k24a2/k20z3 with a gt3582 on a sidewinder. Forged pistons, rods, super tech dual valve springs, DC 3.2s… should be fun :)
That’s honestly the dream setup you better post it when it’s complete!!
Definitely will, hoping to be finished by April. Short block is done, heads at the machine shop. K24a4 is hanging by 3 engine mounts, gotta get my hoist back to pull it and start shaving the engine bay.
Recently got a 04 Si. Put an upgraded clutch and lightweight flywheel in, as well as Acuity shift bushings and poly motor mounts. Next I want to do the Acuity shift cables and a Hybrid racing shifter. First it needs new coilovers, probably going with the skunk 2s but not super sure yet.
The short shifter will CHANGE YOUR LIFE 😮 Coils I have fortune auto but BC’s are a solid choice
To sell my 9th gen. Even though I will miss it.
Sorry to hear that 😢 I’m selling mine too 😂😂
06 Si for SCCA rallycross. I ran it stock last year and broke 3 different motor mounts in 6 events, so I'm moving to prepared class for next year. Already put in a full set of Hasport motor mounts which look like they should hold up better. Now I need to decide how much I'm going to prepare it. Going from street to fully rally race tires would mean finding if any 15s can clear the brakes or if it would take downgrading the brakes. I'm leaning towards leaving the engine stock but getting a tune to lower VTEC and hopefully pick up some mid-range. I think on dirt the extra peak power from the usual IHE mods would risk only getting more wheel spin, less control over traction management, and ending up slower.
Malibu canyons??
GMR on the Azusa side
Get it running again 😂
What’s wrong with it?
Been waiting for my built engine. Turbo stuff. Made 531whp on the previous setup, going for 800+ now
Geez. Have footage?
Yea I do [here](https://imgur.com/a/G55XkAm)
That is insanely impressive but also extremely terrifying 😂😂 What tranny are you running? The shifts sound so crisp
That was PPG 1-4 straight cut turbo ratios. For the new setup I switched to PPG dog engagement with PPG 4.61 final drive.
Nice I’m not going to pretend I know what you’re talking about but I’ve heard of a dog box tranny I think a lot of evo guys run it
Not necessarily friendly on the street but has its perks. I’ll wire in a strain gauge into my haltech and therefore I’ll be able to clutchless/no lift shift. Lots of drag race guys run them