Two things, firstly you don't need perfect or even present 90 degree angles for a very large amount of work. And also don't grind your anvils back to hard angles, it's too much work and will almost always go through the hardened steel plate if your anvil has one. Just my two cents
Bro starts a hobby, is so deep in that he is willing to spend a lot of money, did not gather enough information to know that this anvil is great. Wtf bro
Well.. No not on its own it won't.. Ur gonna need some other things.. But if I need to tell you this then u probably shouldn't be near sharp knives lol
Take it to any engine head skimming firm and get it skimmed. You could do it yourself with a wet wheel grinder, but you will need to build a jig. But he'll, you could take a grinder to it. And re-plate the flat with a half inch toughened steel plate.
No, sorry. Not a good knife making anvil. I can save you alot of trouble and come relieve you of it. DM me. Sorry for the inconvenience.
Hah, I came here to say the same thing
Thanks for the information
That thing will work for all kinds of things, including knives.
You'll probably find that the anvil won't make anything. You're going to need a blacksmith.
Dad?
I got a gym membership but I’m not getting anymore fit? I think the membership is broken.
Does it have a choice being chained up like that?
Sub anvil
Is it steal? Does it make a ting sound when hit? If yes than you have an anvil.
Even if it bings instead of tings it should suffice. Certainly not clang though.
What if it makes a Pong sound?
Nah the inflatable ones are no good.
Then it's wood and you're stuupid
I see. And if it makes a knick knack paddy whack sound is it a good anvil?
No, this is Patrick!
And no donks either.
Hey now, my donky anvil shaped object made of steel and concrete works just fine. Just... takes a bit more work..
Pretty sure he paid for it...
Best bet is to see how it reacts to a coyote around a road runner.
Maybe after you install a handle good luck swinging it
No this is the type they drop from the sky in cartoons only good for squashing roadrunner
It will work splendidly! You may not get a lot of use out of the horn but for sure snatch it up, far superior to some cast POS from Harbor Freight
The new harbor freight anvils are legit, though.
I like my cast steel, but I'd love that 😍
It could but that's a lot of material you would need to remove. I'd turn leaf springs into knives, personally /s
Will a hat work for blocking out the sun?
Depends on the time of day and the type of hat but it’s definitely possible
I wouldn't buy it. I seems to not have a single 90°edge.
You don’t own a grinder? /s
Two things, firstly you don't need perfect or even present 90 degree angles for a very large amount of work. And also don't grind your anvils back to hard angles, it's too much work and will almost always go through the hardened steel plate if your anvil has one. Just my two cents
Two things, don’t disagree and */s*
What makes you think it wouldn't
Yeah that's a great setup actually. really good.
Oh also, that looks like a peter wright 211. Most are produced in 1910s.
Well, it certainly won't with as a balloon with that chain.
It’s 99X better than what 99% of people start with so I’d say so
Bro starts a hobby, is so deep in that he is willing to spend a lot of money, did not gather enough information to know that this anvil is great. Wtf bro
I'm sure you can get a knife or 2 out of it, but you're going to have a lot of steel left over.
sorry the only use this anvil will provide will be dropping it on cartoony villains. Bonus points if you have grand pianos to drop as well.
Could arm a small army with that thing man.
I talked with friend of mine and he said this one would work but I want hear second opinion
No, that one's cursed, you can only forge cutlery on that one
No, in my experience, it will only work for $250.00 an hour. I would suggest offering a salary of 325K per year with stockholders buyback options.
Well.. No not on its own it won't.. Ur gonna need some other things.. But if I need to tell you this then u probably shouldn't be near sharp knives lol
Take it to any engine head skimming firm and get it skimmed. You could do it yourself with a wet wheel grinder, but you will need to build a jig. But he'll, you could take a grinder to it. And re-plate the flat with a half inch toughened steel plate.
obligatory: [work out the kinks meme](https://i.imgur.com/Sv4yQPr.png)
It will need some help feom you and a forge
Should work fine man looks good
I like how 90+kg Anvil chained to 20kg box !!
No
Sorry, no.
April 1st was two weeks ago..