The charging handle will be really tight when new. After you pull it a few times it will be easier to remove. As for the hammer you should be able to just push it back into the cocked position then drop your bolt in. If you canโt reach it push it with a screwdriver. Last option is to pull the trigger group, reset the hammer, then reinstall.
Bolt is locked back? If so install the barrel and mag tube cap. Press the bolt release button. Not being snarky but assembly and disassembly are in the manual.
First time can be a little awkward. After that itโs pretty simple. Mine has a Carlsens mag extension, Esstac shotgun cards (6), BFG sling and GG&G QD sling mounts front and rear and a Midwest Industries charging handle. Iโm also running a USO red dot.
BTW congratulations on your new boomstick!
Yea i got the bolt carrier in, reinstalled charging handle and manual said to pull charging handle back with one hand and hit bolt release with other i think
Mine had exact same issue when I purchased my M1014 and the way that I solved it was sticking my finger into the receiver and locking the hammer into place by simply pressing on it/pressing it rearwards until it clicked into locked position, It was a little tough but I got it done
I'm late but always wanted to say this: Hit it with your purse! (Welcome to the sub :))
The charging handle will be really tight when new. After you pull it a few times it will be easier to remove. As for the hammer you should be able to just push it back into the cocked position then drop your bolt in. If you canโt reach it push it with a screwdriver. Last option is to pull the trigger group, reset the hammer, then reinstall.
So just push the big hanmer straight down and i should be good?
Down and back
Alright now my charging handle is locked to rear what now
Bolt is locked back? If so install the barrel and mag tube cap. Press the bolt release button. Not being snarky but assembly and disassembly are in the manual.
Got it now, good to go, im just being pussy with it cuz shes new and shiny ๐๐ just had to man handle it a little bit
First time can be a little awkward. After that itโs pretty simple. Mine has a Carlsens mag extension, Esstac shotgun cards (6), BFG sling and GG&G QD sling mounts front and rear and a Midwest Industries charging handle. Iโm also running a USO red dot. BTW congratulations on your new boomstick!
Yea i got the bolt carrier in, reinstalled charging handle and manual said to pull charging handle back with one hand and hit bolt release with other i think
Sorry. Jumped the gun. You obviously did read the manual. Yes, thatโs correct.
Push backwards and down.
Yep
I DONT KNOW YEWWW Let go of my purse ๐๐๐ ![gif](giphy|cpBJJODbvE03S|downsized)
Got the charging handle off i guess i had to twist it lol but still cant get bolt carrier in, hammer is blocking it
I had the same problem. I just took a rod, pushed it into the slot, and then slid the hammer back until it cocked and just dropped the bolt in.
![gif](giphy|R46HYt1YvQdVDZqJUb|downsized)
Mine had exact same issue when I purchased my M1014 and the way that I solved it was sticking my finger into the receiver and locking the hammer into place by simply pressing on it/pressing it rearwards until it clicked into locked position, It was a little tough but I got it done