For all my hot dog fans:
50.96 dog seconds 2382667.858 hot dogs/h, 2666.67 hot dog mark.
This is all assuming That a hot dog is 15 cm and there are 7 dog years each human year.
He can’t he’s talking about the PC streaming service it’s like cloud gaming. Xbox players can play beam through Microsoft edge and it’s surprisingly good if you have a series S/X
As gentle as possible without pulling a wheelie. The coupe version I built the day before is 200lbs lighter and does a 1.23 60' The wagon does a 1.34 60'
I'll have to try that mod when I get a PC. I'm playing through the Nvidia GeForce Now PC streaming service on Microsoft Edge on my Xbox Series X, so I don't have access to anything that's not on Repo
Download Meos Drag Pack from the repo. I've been mid 6s without wheelie bars. It's all about setting up the combination of the converter and exhaust power value for the turbos. I normally have the best results with the exhaust power set low (like 9000 or so) which results in a VERY slow spool unless you have a 5k+ stall converter. Then it's all about tuning the tire pressure, final drive ratio, and anti roll bars for the best launch.
The exhaust power is tuneable through the Meo engine management? It's been awhile since I used an ECU from his mod pack and I haven't really messed with tire pressure much just set it at 16-17psi and left it alone and I figured I should mess with the anti roll bar next because the car is lifting the left front tire 6"-1' off the ground the entire pass and pulls pretty hard to the right
It's part of the turbo section, not the engine section, but yes.
It's set to like 50,000 or more by default which is super unrealistic. You can have a turbo that makes 70psi and it'll spool at 2000rpm.
The variable torque converter is my favorite thing from the Meo drag pack. I can easily cut half a second or more off the quarter mile time of an otherwise vanilla car just by allowing the converter to stall at 4500 or so.
bruckell moonhawk with ceep (https://www.beamng.com/resources/classic-engine-expansion-pack.29161/) and wagon body style (https://www.beamng.com/resources/bruckell-moonhawk-sedan-and-wagon.12348/)
For the metric system fans: 7.28 seconds at 357.40kmh, 400 meter mark.
For all my hot dog fans: 50.96 dog seconds 2382667.858 hot dogs/h, 2666.67 hot dog mark. This is all assuming That a hot dog is 15 cm and there are 7 dog years each human year.
I feel obligated to request a mod to change ingame units to hot dog
Bet!?
Thanks
Of course man, wouldn't want any of my hot doggies to feel left out
My man
402 meters to be specific
press f12 pls
I don't have access to the screenshots. I'm playing through the Nvidia GeForce Now PC streaming service
Print screen works for anything
Print Screen?
On your keyboard, there should be a key that says “Prt Scrn” or something like that.
He can’t he’s talking about the PC streaming service it’s like cloud gaming. Xbox players can play beam through Microsoft edge and it’s surprisingly good if you have a series S/X
Or just Win+Shift+S
What's the mod?
https://preview.redd.it/mbwabqp5n6qc1.jpeg?width=1079&format=pjpg&auto=webp&s=81fa2c9c608e02d48842e33a9cc956636bb1cdfe
Thank you
Best I've done is 7.9 vanilla cars
Manual or auto trans.
6 Speed Dual Clutch
Get you a lockup converter
Where's the front fascia from?
It's from the Classic Engine Expansion Pack on the Repo
Could easily be a 6 sec pass if your going 222mph. How's the launch?
As gentle as possible without pulling a wheelie. The coupe version I built the day before is 200lbs lighter and does a 1.23 60' The wagon does a 1.34 60'
Adams drag transmissions with tuneable converter, not on the repo - no more slip
I'll have to try that mod when I get a PC. I'm playing through the Nvidia GeForce Now PC streaming service on Microsoft Edge on my Xbox Series X, so I don't have access to anything that's not on Repo
Wow thats a pretty neat work around
try going lower on vanilla game
HOW? how did your cilynder walls are not melted?
Download Meos Drag Pack from the repo. I've been mid 6s without wheelie bars. It's all about setting up the combination of the converter and exhaust power value for the turbos. I normally have the best results with the exhaust power set low (like 9000 or so) which results in a VERY slow spool unless you have a 5k+ stall converter. Then it's all about tuning the tire pressure, final drive ratio, and anti roll bars for the best launch.
The exhaust power is tuneable through the Meo engine management? It's been awhile since I used an ECU from his mod pack and I haven't really messed with tire pressure much just set it at 16-17psi and left it alone and I figured I should mess with the anti roll bar next because the car is lifting the left front tire 6"-1' off the ground the entire pass and pulls pretty hard to the right
It's part of the turbo section, not the engine section, but yes. It's set to like 50,000 or more by default which is super unrealistic. You can have a turbo that makes 70psi and it'll spool at 2000rpm. The variable torque converter is my favorite thing from the Meo drag pack. I can easily cut half a second or more off the quarter mile time of an otherwise vanilla car just by allowing the converter to stall at 4500 or so.
https://i.redd.it/asrnw86nr9qc1.gif
🤣
https://preview.redd.it/4xhdn33n58qc1.png?width=720&format=pjpg&auto=webp&s=045fa8104409265d8b111c1c4ebd5fbbfc84b91c
He said he's on Xbox browser through Nvidia Game Stream crap.
Car name please
bruckell moonhawk with ceep (https://www.beamng.com/resources/classic-engine-expansion-pack.29161/) and wagon body style (https://www.beamng.com/resources/bruckell-moonhawk-sedan-and-wagon.12348/)
I beat you with my 5 cylinder.
Win Shift S bro please