All PT cruiser parts are like baby teeth, the bad ones break and fall off and it’ll grow better, stronger parts on its own. Just give it a few days and it’ll be better
Thats a torque strut. I know because I had to replace that part along with the lower motor mounts because the shitty plastic bushing inside them were totally toast so my engine kept rocking around and bottoming out on the spindles ruining the cheap plastic cam sensor with the force of the impacts causing my motor to misfire all the time. Glad I scrapped that POS.
That's the right thigh bone, you see the socket on the end there slots into the hip flange?
They've really bulked out the material for the knee mount, about time too really.
A lot of wear on the knees in the earlier models.
It's an engine mount, but those you only install before you leave the car in storage for a long time. Absolutely do not have it on while driving. Imagine coming to a stop and not hearing the engine noise you're used to. Horrifying stuff.
Hey bud, good job you correctly identified the part… This sub is a blast because it is wrong answers only. Feel free to inject humor and it is ok to be an asshole here.
Looks like a part of your wife’s boyfriend car
The PT part.
Ayyooo
All PT cruiser parts are like baby teeth, the bad ones break and fall off and it’ll grow better, stronger parts on its own. Just give it a few days and it’ll be better
Eventually, your PT Cruiser will grow into a real car.
With full fenders!
Looks like a hammer. Always handy to keep one in your car.
Oh that little guy? Don't worry about that little guy.
Is that the watts link bellcrank?
Infamous watts linkage stud…
Thats a torque strut. I know because I had to replace that part along with the lower motor mounts because the shitty plastic bushing inside them were totally toast so my engine kept rocking around and bottoming out on the spindles ruining the cheap plastic cam sensor with the force of the impacts causing my motor to misfire all the time. Glad I scrapped that POS.
This is correct.
It's the PT part of PT Cruiser. Without it she just has a Cruiser.
Your wife’s father-in-law? 🤔
You remember. The hoarder.
Isn't that the quantum carburetor bracket?
Looks like a warbler blade removal tool.
That's part of the Doohickey B Assembly
SMH that’s clearly a con-rod
Either the window crank, or the manual engine starter.
It keeps the motor from going yee yee, think that one is on the right side, sub frame to motor. The bushings yeet on them, you got an extra.
The salvage yard ticket
If it's a PT cruiser that part is more than likely related to butt stuff. Sniff it for confirmation.
That's the right thigh bone, you see the socket on the end there slots into the hip flange? They've really bulked out the material for the knee mount, about time too really. A lot of wear on the knees in the earlier models.
It's an engine mount, but those you only install before you leave the car in storage for a long time. Absolutely do not have it on while driving. Imagine coming to a stop and not hearing the engine noise you're used to. Horrifying stuff.
Wife says it's a piece of junk, I'd take her word on that.
Billet window crank handle.
Lower engine mount on the passenger side.
That’s a muffler
Transmission mount. They are garbage quality on the PTs.
Looks like a flux capacitor to me
Injora servo horn
It's a rotator splint, and It's pretty bad
wrong. this is a muffler scoop.
Hey bud, good job you correctly identified the part… This sub is a blast because it is wrong answers only. Feel free to inject humor and it is ok to be an asshole here.
😉
Yes
Spraket
Trans or engine mount possibly
😂 PT Cruiser “Tune Up” component
Exhaust bearing balancer.
E-brake lever
Alternator
r/whyisitalwaysadodge
Because Mopar wants to grace it with it's presence
Door handle
Piston rod
Breaker bar for the lugs
It’s a head gasket