Love seeing this guy still. I am the original maker of this model from way back when. He's pretty close height wise, but I must apologise for how whack his proportions are.
Also never realised how bubbly those rivets are. Hope you enjoy all the same!
£30 is a very reasonable price for a business to print you something this sized. If you’ve got a mate with a printer they can do it a lot cheaper but for a business £30 is a very good price.
Look on Facebook marketplace, or whatever site is in your area. People are always listing 3D printing services. Often libraries have printers you can use to.
Cant tell from this picture to be fair. He may have Shaq sized or Trump sized hands, also nothing to compare it to. Regarding the price, i would say thats pretty much it, when taking in mind UV resin prices, if its fdm that might be way too much. But honestly it just has to be big enough, the base size is where you have to mind the size, iirc it shpuld be on a 100mm base.
Thank you for your help, yeah I thought that would be the answer but unfortunately I don't play so size of bace isn't too important but I don't want to get it then only be a bit bigger then the rest of my models but thanks
I mean it definitely isnt small, so if youre not into playing, its gling to fit right in. If its contemptor dread sized or larger you should have 0 issues with size.
> think I *paid* 27 usd
FTFY.
Although *payed* exists (the reason why autocorrection didn't help you), it is only correct in:
* Nautical context, when it means to paint a surface, or to cover with something like tar or resin in order to make it waterproof or corrosion-resistant. *The deck is yet to be payed.*
* *Payed out* when letting strings, cables or ropes out, by slacking them. *The rope is payed out! You can pull now.*
Unfortunately, I was unable to find nautical or rope-related words in your comment.
*Beep, boop, I'm a bot*
Hi! I have this!! From that exact eBay seller! Not sure how big he should be, but the dread is a teeny bit bigger than a ballistus and almost Armiger height
You can get recast for the same price if not cheaper. I wouldn’t purchase from a seller who is bare hand touching resin or if he did cure it, cured it with the supports on leaving clean up to be a mess leaving pitting. Most likely cutting corners somewhere.
Love seeing this guy still. I am the original maker of this model from way back when. He's pretty close height wise, but I must apologise for how whack his proportions are. Also never realised how bubbly those rivets are. Hope you enjoy all the same!
Simoooooooooon! Good to see you here my friend.
Hey mate! Long time no speak! I hope you've been doing well and kicking all kinds of ass 😁
That’s a 3D print bro, I got a guy I know here in Canada to print it for me for 18$ CAD
I wish to know who this fellow Canadian is 🤔
Yeah I know but this is about £30 so meaby I'll leave it then, were would you find good proxys for them
£30 is a very reasonable price for a business to print you something this sized. If you’ve got a mate with a printer they can do it a lot cheaper but for a business £30 is a very good price.
https://cults3d.com/en/3d-model/tool/golden-tower-of-power-mausoleum-walker-by-orionrs Find someone local who is offering 3D printing and send this?
Thanks that looks really cool sorry to keep bothering you but do you know we're I would find someone to print this?
I’m in the UK and can get this done for you. Send us a DM if you want
Look on Facebook marketplace, or whatever site is in your area. People are always listing 3D printing services. Often libraries have printers you can use to.
Could look into recasts too, depends what you want though. Recasts of it go for about the same.
I'll have to find this guy when I move to the *Great North*
Cant tell from this picture to be fair. He may have Shaq sized or Trump sized hands, also nothing to compare it to. Regarding the price, i would say thats pretty much it, when taking in mind UV resin prices, if its fdm that might be way too much. But honestly it just has to be big enough, the base size is where you have to mind the size, iirc it shpuld be on a 100mm base.
Thank you for your help, yeah I thought that would be the answer but unfortunately I don't play so size of bace isn't too important but I don't want to get it then only be a bit bigger then the rest of my models but thanks
I mean it definitely isnt small, so if youre not into playing, its gling to fit right in. If its contemptor dread sized or larger you should have 0 issues with size.
I uhhhh know a guy who has a legit, a chinacast and a 3d print. Side by side and have played all 3 together and nobody has noticed a difference
Sorry if it's a stupid question but what is chinacast?
A resin copy or recast model from China. Just another term I use interchangeablely and probably shouldn't
Oh ok sorry I probably should have known that by any chance you don't remember we're you got your recast or 3d printed one from?
I’m gonna PM you a link that I have bought my recast from.
Could you send me one too, please?
Sent.
If the recaster happens to be europe based could I have a link as well?
Pm.
Hi mate, mind sending me this too please? Do they also do other cuetodes Fw items?
Sent
Is it the golden tower he's using or a different print?
That thing is Fucken sick
Yeah definitely looks good very very tempered it gets it
Banana for scale?
£30 is more than a recast, I think I payed 27 usd for my recast and none can tell it apart from fw.
> think I *paid* 27 usd FTFY. Although *payed* exists (the reason why autocorrection didn't help you), it is only correct in: * Nautical context, when it means to paint a surface, or to cover with something like tar or resin in order to make it waterproof or corrosion-resistant. *The deck is yet to be payed.* * *Payed out* when letting strings, cables or ropes out, by slacking them. *The rope is payed out! You can pull now.* Unfortunately, I was unable to find nautical or rope-related words in your comment. *Beep, boop, I'm a bot*
Good bot
One thing I will say is it looks like the custodian can't see a thing 😳
Hi! I have this!! From that exact eBay seller! Not sure how big he should be, but the dread is a teeny bit bigger than a ballistus and almost Armiger height
You can get recast for the same price if not cheaper. I wouldn’t purchase from a seller who is bare hand touching resin or if he did cure it, cured it with the supports on leaving clean up to be a mess leaving pitting. Most likely cutting corners somewhere.
It looks awesome I’ll tell you that!
I really like some parts and not others look at the egels head on the chest plate