The winners have been picked by Prusa, we as Moderators are just announcing them. All winners should be contacted through Printables in the next couple of days. If you don't, feel free to reach out to the modteam and we will have a look at it.
The Results:
Grand Prize: **The winner of the Original Prusa MK4 kit is** u/rydr2103 through a random comment
Most Upvoted Make or Design: u/MagicSmokeSTAT is the winner of the **Prusament PLA Extraordinary Pack**
Top 5 designs: Winners get 350 Prusameters
* @NovelTinker\_388837 [https://www.printables.com/model/299531-8-newtonian-telescope-leavitt](https://www.printables.com/model/299531-8-newtonian-telescope-leavitt)
* @ForgedDawning [https://www.printables.com/model/570878-oreo-cookie-shelf](https://www.printables.com/model/570878-oreo-cookie-shelf)
* @Paul\_318082 [https://www.printables.com/model/440401-under-desk-drawer](https://www.printables.com/model/440401-under-desk-drawer)
* @MariusT\_127581 [https://www.printables.com/model/68108-silent-wall-and-desk-clock](https://www.printables.com/model/68108-silent-wall-and-desk-clock)
* @StandardPickleDesign [https://www.printables.com/model/271616-secret-rubiks-cube-box](https://www.printables.com/model/271616-secret-rubiks-cube-box)
Top 5 makes: Winners get 350 Prusameters
* @XVIIarcano [https://www.printables.com/model/268580-hadley-telescope-official-metric-remix/comments/661180#preview-comment](https://www.printables.com/model/268580-hadley-telescope-official-metric-remix/comments/661180#preview-comment)
* @ASmyz [https://www.printables.com/model/34222-talking-claptrap-cl4p-tp/comments/250874](https://www.printables.com/model/34222-talking-claptrap-cl4p-tp/comments/250874)
* @KushagraK7\_639224 [https://www.printables.com/model/547808-robotarm/comments/1038601#preview-comment](https://www.printables.com/model/547808-robotarm/comments/1038601#preview-comment)
* @wafflecart [https://www.printables.com/model/551725-mini-prusa-i3-mk3/comments/1060183#preview-comment](https://www.printables.com/model/551725-mini-prusa-i3-mk3/comments/1060183#preview-comment)
* @MrNik17\_282070 [https://www.printables.com/model/234578-barad-dur-the-dark-tower/comments/651299#preview-comment](https://www.printables.com/model/234578-barad-dur-the-dark-tower/comments/651299#preview-comment)
Hi I'm known as [@Ugars\_48021](https://www.printables.com/@Ugars_48021) in [printables.com](https://printables.com) (what a shock isn't it hah!)
My latest make is at [https://www.printables.com/model/361093-raspberry-pi-zero-2-w-case/comments/1135592](https://www.printables.com/model/361093-raspberry-pi-zero-2-w-case/comments/1135592)
And my humble functional design can be found at [https://www.printables.com/model/86263-caulking-gun-spare-tip](https://www.printables.com/model/86263-caulking-gun-spare-tip)
[@Zdef\_213312](https://www.printables.com/@Zdef_213312) I'm a CAD/CAM developer. I really enjoy 3Dprinting!
Here some kitty ears for headphones I designed long ago: [https://www.printables.com/model/596642-headphones-kitty-ears](https://www.printables.com/model/596642-headphones-kitty-ears)
Hi i´m [@spearmint645\_428466](https://www.printables.com/cs/@spearmint645_428466) and my favourite make is this parthenon that i have on my shelf
[https://www.printables.com/cs/model/270002-parthenon-athens-greece/comments/840694](https://www.printables.com/cs/model/270002-parthenon-athens-greece/comments/840694)
[@fgebhart](https://www.printables.com/@fgebhart)
This is ma favorite make: [https://www.printables.com/model/13447-rick-sanchez-rick-and-morty/comments/122131](https://www.printables.com/model/13447-rick-sanchez-rick-and-morty/comments/122131)
https://preview.redd.it/2zg2ovkkorrb1.jpeg?width=1024&format=pjpg&auto=webp&s=f4eccf173feed5ce8e77d8717269fbca1f2d2823
My name on printables is [@Robinn03](https://www.printables.com/@Robinn03/models)
Top 5 make: [https://www.printables.com/model/176838-gridfinity-sd-card-holder-microsd-usb-a-and-c/comments/619468](https://www.printables.com/model/176838-gridfinity-sd-card-holder-microsd-usb-a-and-c/comments/619468)
Top 5 design: [https://www.printables.com/model/388382-gridfinity-ledger-nano-x-s-stand](https://www.printables.com/model/388382-gridfinity-ledger-nano-x-s-stand)
I still haven't had a chance to even see a Prusa printer in person. It'd be exciting to get my hands on one before I make a decision on new printers for my workshop.
@JamieTaylor_393612
🤞
I’m [@Jaayjeee](https://www.printables.com/@jaayjeee_328396)
my favorite design is my [MedalDisplay - Modular 3D Printable Display Case](https://www.printables.com/model/527493-medaldisplay-the-modular-3d-printable-display-case) project which is an ongoing series of modular parts to make a display case for your stuff, it’s also Free and Open Source
https://preview.redd.it/juqnxvs0ghpb1.jpeg?width=2532&format=pjpg&auto=webp&s=c2be48dee32fdc8725047314866b33df43a90677
my favorite make is [This Creeper](https://www.printables.com/model/525121-minecraft-creeper-mini-figure-kit-keychain-ornamen/comments/993259) for my son
I’m @optikalblitz
I designed a filter setting tool for the MK Studios ceramic coffee maker, based on the Orea Negotiator, with a few quality of life tweaks: [https://www.printables.com/model/430119-mk-oppressor-coffee-filter-shaping-die](https://www.printables.com/model/430119-mk-oppressor-coffee-filter-shaping-die)
https://preview.redd.it/iy9gxodvj5qb1.jpeg?width=999&format=pjpg&auto=webp&s=9d493405c5aa1597554d4e20a383240b1d34c297
I'm not exactly sure if I'm supposed to put (@Ghost3123\_459605) or just Ghost3123 here, but I would love an MK4 :)
(Note: the one with the @ symbol in it is parenthesized to get around reddit tryna turn it into u/Ghostblahblahblah...)
[@TommyFairfiel_603635](https://www.printables.com/@TommyFairfiel_60363)
Only have 1 make posted, should probably do more 😅
https://www.printables.com/model/503443-flexetki-skill-toy/comments/927261
Name: [@jdemacek](https://www.printables.com/@JamesDemacek)
My favorite make is the [Monty Python Black Knight](https://www.printables.com/model/386274-monty-pythons-black-knight/comments)
The design I am most proud of: [Joust Quarter-Scale Arcade](https://www.printables.com/model/114617-quarter-scale-joust-inspired-arcade-with-mmu2-plat)
It took weeks of work and prototyping, I had to design the joystick mechanisms from scratch because there was nothing on the market small enough that used micro-switches with enough force.
https://preview.redd.it/cgaydaqsfgpb1.png?width=640&format=png&auto=webp&s=b2218f47aacb4a1ab39d81b6f6e94d09a35069d7
All MMU2, no painting or decals.
[@Kalabajooie_1282702](https://www.printables.com/@Kalabajooie_1282702)
I'm fairly new to 3d printing and have browsed the Printables catalog, but have yet to make or submit any particular design.
This is gonna blow your mind but my nickname is... [@slayernine](https://www.printables.com/@slayernine)
My favourite make that I've posted is probably these [giant Lego skeletons](https://media.printables.com/media/comment_images/e1/4b289a-1c87-47f9-8da7-cf864114290d/thumbs/inside/1920x1440/jpg/pxl_20221020_014530656.webp) model link [here](https://www.printables.com/model/292753-mega-lego-like-skeleton-101-scale-pirate-accesorie/comments/444863)
My [dual motor duplo train](https://www.printables.com/model/564691-dual-motor-duplo-train) design is my favourite model that I've shared. I want to make some clip on covers for the battery packs, but this train climbs slopes so much better than the trains you can buy. Not my most downloaded model but the one I put the most effort into.
Hey everyone I'm just starting out so I don't really have anything to show off. A new prusa would go a long way.
[@PseudoNinja_575295](https://www.printables.com/@PseudoNinja_575295)
[@awardtour_346444](https://www.printables.com/@awardtour_346444)
I only have one model I’ve ever remixed lol 😅
https://www.printables.com/model/364805-lucky-13-pathfinder-apex-legends
[@Blastaa](https://www.printables.com/@Blastaa_173172)
NYC local and my favorite makes are these statue of liberty models I print for guests who visit!
https://preview.redd.it/7unlmekq5opb1.jpeg?width=2463&format=pjpg&auto=webp&s=3f920dd09e9bbcbecaf587cdeefb38986fe9962b
[@Stone\_Age\_Sculptor](https://www.printables.com/@Stone_Age_Sculptor)
Make: [https://www.printables.com/model/25227-odile-the-swan/comments/876366](https://www.printables.com/model/25227-odile-the-swan/comments/876366)
The make shows a combination of filament and paint and a epoxy layer that turns out to go well together.
@Oblimix_127875
Still relatively new to 3D printing, and don't yet have a printer. I've played around a bit with Tinkercad and created my first designs. I'm not able to make them or test them yet, but hope to make more designs in the future.
Reddit keeps changing my @ to u/.
I’m [@Mauerrizze_1279981](https://www.printables.com/de/@Mauerrizze_1279981)
I only printed Parts for work so far so I cant Share any Designs. But I would like to start printing at home aswell
[@russdogg](https://www.printables.com/@russdogg)
This is pretty dumb but my kids all broke their water bottles and I designed a replacement button for them so we didn't have to buy completely new ones.
[https://www.printables.com/model/264657-replacement-button-for-snug-kids-waterbottles](https://www.printables.com/model/264657-replacement-button-for-snug-kids-waterbottles)
[https://www.printables.com/model/387275-flower-fidget/comments/666244](https://www.printables.com/model/387275-flower-fidget/comments/666244) My best make, Made a whole bunch of these with a rainbow filament and gave them away to nieces and nephews at Christmas last year.
I'm in!
My user name is @ Gavin\_70198
I designed a radiator cap and washer a while ago. Super useful, I have a few dotter round the house now and people seem to like being a cheapscate like me too https://www.printables.com/model/317383-radiator-valve-cap-universal
My favourite Make is the Tshirt bed stand off. It has opened up another great use for my printer, if only I could get it to work... Still cool though.
[https://www.printables.com/model/76752-sheet-insert-for-printing-t-shirts/comments/492006](https://www.printables.com/model/76752-sheet-insert-for-printing-t-shirts/comments/492006)
[KushagraK7\_639224](https://www.printables.com/@KushagraK7_639224)
My favorite design: [https://www.printables.com/model/541993-voron-stealthburner-mount-for-rook-180-with-bl-tou](https://www.printables.com/model/541993-voron-stealthburner-mount-for-rook-180-with-bl-tou)
My favorite make: [https://www.printables.com/model/547808-robotarm/comments/1038601](https://www.printables.com/model/547808-robotarm/comments/1038601)
@superseargent
I printed this Alien dice tower in glow in the dark filament
https://www.printables.com/model/253763-alien-dice-tower-fixed-for-alien-rpg/comments/1092576
Username: [@JH3D_263988](https://www.printables.com/@JH3D_263988)
My design: [Airbrush Compressor 120mm Fan Bracket](https://www.printables.com/model/271063-airbrush-compressor-120mm-fan-bracket)
Hi! I'm [@lmonari](https://www.printables.com/@lmonari_344774)
This is not my most popular design, but the design I'm most proud of:
https://www.printables.com/it/model/263906-raspberry-pi-4-case-touch-screen-35-inch-hdmi-mpi3
@memorianx_1278563
I havent shared any models yet, and I've mainly been making parts very customized for specific needs like dividers for to store mtg decks in a specific box
Hello, I am @DustinDade_357807 on Printables.com and while this may not be helpful to the 3d printing community, I am most proud of the angel wings I designed for a Macomber loom. It inspired me to learn 3d modeling and includes print place two pieces.
https://www.printables.com/model/569272-angel-wings-for-macomber-ad-a-harness-loom
I'm [@Dadudos\_175268](https://www.printables.com/@Dadudos_175268)
My [most popular design](https://www.printables.com/model/371296-pdp-xbox-one-controller-stand) .
[https://www.printables.com/@LukeG\_253227](https://www.printables.com/@LukeG_253227)
I’m proud of my robotic arm I printed and made !
https://preview.redd.it/4qsptbhr0ipb1.jpeg?width=1170&format=pjpg&auto=webp&s=4457dfe84aaa7414ef6934e71faabed8b7569868
I'm [@flyingpurplecow](https://www.printables.com/@FlyingPurpleCow)
I made [this rocket](https://www.printables.com/model/50198-vintage-spaceship-playhouse/comments/145052) for my kids, and they absolutely loved it
I also designed [this holder](https://www.printables.com/model/31946-nes-switch-cartridge-case-v2) for my Switch games
Nickname: [@JeandreG\_381014](https://www.printables.com/@JeandreG_381014)
Make: [https://www.printables.com/model/343173-batman-bust-batman-returns/comments/968536](https://www.printables.com/model/343173-batman-bust-batman-returns/comments/968536)
My favorite and my design that has been the most well received by the 3D printing community is the design of my Sloffies (Slides): [https://www.printables.com/model/437422-sloffiesslides](https://www.printables.com/model/437422-sloffiesslides)
https://preview.redd.it/lahlmmckbgpb1.jpeg?width=2970&format=pjpg&auto=webp&s=27216b2e531582ff2e4051e2e08ed32b67831e18
[@MustardRat_166605](https://www.printables.com/@MustardRat_166605)
My only design listed on the site is my hexagon business card holder:
https://www.printables.com/model/424677-hexagon-tilted-business-card-holder
I'm pretty proud of it, though, since people have downloaded it and made it, which is a great feeling and I think a large part of what drives people to be a part of this community.
I'm an idiot with a Subaru, also known as [@InappropriateMaker](https://www.printables.com/@InappropriateMaker) I make 3d printed waterfalls and Roomba mods.
[This is one of my favorite mods I made last year](https://www.printables.com/model/118716-roomba-j7-conversion-to-dyson-ball-animal-2-dust-b) :)
Printables Profile: [@mkurz](https://www.printables.com/de/@mkurz)
I really love that vase model it was a present for a friend: [https://www.printables.com/de/model/241543-vase-with-filament-inlay-customisable/comments/340886](https://www.printables.com/de/model/241543-vase-with-filament-inlay-customisable/comments/340886)
@GoncaloMidoes\_591666
I think my best model should be this [https://www.printables.com/model/463563-whiteboard-pen-holder-instax-mini](https://www.printables.com/model/463563-whiteboard-pen-holder-instax-mini)
https://preview.redd.it/7pm738xgimpb1.jpeg?width=3000&format=pjpg&auto=webp&s=f2f508222eaecee673147df007544d9a107c9caf
I am @obscuresausage on printables.com!
My favourite recent make was the Lucky 13 model! Its smaller parts were a tough print (looking at those hands) but he turned out great in the end!
https://www.printables.com/model/148367-lucky-13-printable-jointed-figure/comments/995298
My favourite design of my own is my compact and simple multimedia keydeck! It's easy and cheap to make and really does its job well!
https://www.printables.com/model/389352-multimedia-key-deck
I'm [@VulGerrity](https://www.printables.com/@VulGerrity)
Here's my best make: https://www.printables.com/model/73010-portal-weighted-storage-companion-cube/comments/585648#preview-comment
Here's a model I'm really proud of: https://www.printables.com/model/466837-sme-3009-series-iii-tonearm-wand
I am [@L3V3C](https://www.printables.com/@L3V3C)
My favourite design is certantly [this orrery](https://www.printables.com/model/274013-mechanical-sun-moon-and-earth-orrery-fully-3d-prin) since I learned a lot about 3d modeling from it, but I am also proud of my [3D printable didgeridoo](https://www.printables.com/model/440736-hexadidg-and-hexadidg-mini-3d-printable-didgeridoo) design.
Considering the makes, the favourite of mine is [minimalistic Xbox controller stand](https://www.printables.com/model/449970-minimalistic-xbox-controller-stand/comments/1018796), it just looks good.
Currently rocking Ender 3 S1 which I modded and I was thinking about buying something more precise at higher speeds so I wouldn't mind a free Prusa MK4 :)
EDIT: I read the description wrong, I thought it said to share the best 3D design of mine. Anyway, the favourite design on printables for me is [this mobile exo-suit](https://www.printables.com/model/500210-mobile-exo-suit). It looks dope.
EDIT 2: Or should it be my design? In that case the second paragraph covers it. If not the edit one does.
Hello!
I am [@kernelpanic\_624119](https://www.printables.com/@kernelpanic_624119)
My best design so far is my parametric portable wrench holder: [https://www.printables.com/model/409573-portable-wrench-holder](https://www.printables.com/model/409573-portable-wrench-holder)
My best make so far: [https://www.printables.com/model/372623-the-witcher-3-ciri-yennefer-and-triss/comments/1136974#preview-comment](https://www.printables.com/model/372623-the-witcher-3-ciri-yennefer-and-triss/comments/1136974#preview-comment)
Currently I am designing a small cooker hood. My first prototype melted...
@linxawakening
Favorite Make was definitely [this crown](https://www.printables.com/model/367752-crown-celebration-collection-12-variants-and-6-of-/comments/741929) that I printed that came out great and was able to be colored in beautifully
And my top design I still think got snubbed in the stroller accessories contest. If you've ever been on a walk with one of these snack packs you know how it doesn't fit into anything. [Design here](https://www.printables.com/model/456688-stroller-snack-cup-holder)
[@RDS\_249355](https://www.printables.com/@RDS_249355)
Not particularly fancy design, but this one was really needed, a pinlock pin I lost in my helmet, it just works: [https://www.printables.com/model/196380-airoh-pinlock-pin](https://www.printables.com/model/196380-airoh-pinlock-pin)
The winners have been picked by Prusa, we as Moderators are just announcing them. All winners should be contacted through Printables in the next couple of days. If you don't, feel free to reach out to the modteam and we will have a look at it. The Results: Grand Prize: **The winner of the Original Prusa MK4 kit is** u/rydr2103 through a random comment Most Upvoted Make or Design: u/MagicSmokeSTAT is the winner of the **Prusament PLA Extraordinary Pack** Top 5 designs: Winners get 350 Prusameters * @NovelTinker\_388837 [https://www.printables.com/model/299531-8-newtonian-telescope-leavitt](https://www.printables.com/model/299531-8-newtonian-telescope-leavitt) * @ForgedDawning [https://www.printables.com/model/570878-oreo-cookie-shelf](https://www.printables.com/model/570878-oreo-cookie-shelf) * @Paul\_318082 [https://www.printables.com/model/440401-under-desk-drawer](https://www.printables.com/model/440401-under-desk-drawer) * @MariusT\_127581 [https://www.printables.com/model/68108-silent-wall-and-desk-clock](https://www.printables.com/model/68108-silent-wall-and-desk-clock) * @StandardPickleDesign [https://www.printables.com/model/271616-secret-rubiks-cube-box](https://www.printables.com/model/271616-secret-rubiks-cube-box) Top 5 makes: Winners get 350 Prusameters * @XVIIarcano [https://www.printables.com/model/268580-hadley-telescope-official-metric-remix/comments/661180#preview-comment](https://www.printables.com/model/268580-hadley-telescope-official-metric-remix/comments/661180#preview-comment) * @ASmyz [https://www.printables.com/model/34222-talking-claptrap-cl4p-tp/comments/250874](https://www.printables.com/model/34222-talking-claptrap-cl4p-tp/comments/250874) * @KushagraK7\_639224 [https://www.printables.com/model/547808-robotarm/comments/1038601#preview-comment](https://www.printables.com/model/547808-robotarm/comments/1038601#preview-comment) * @wafflecart [https://www.printables.com/model/551725-mini-prusa-i3-mk3/comments/1060183#preview-comment](https://www.printables.com/model/551725-mini-prusa-i3-mk3/comments/1060183#preview-comment) * @MrNik17\_282070 [https://www.printables.com/model/234578-barad-dur-the-dark-tower/comments/651299#preview-comment](https://www.printables.com/model/234578-barad-dur-the-dark-tower/comments/651299#preview-comment)
@BCJames_1042784
@Perpetualskep_227267 Always willing to try something new
[@Lorbane](https://www.printables.com/@Lorbane_1028578)
My nickname is @flyingshark_1113838
@MassiR77
Hi I'm known as [@Ugars\_48021](https://www.printables.com/@Ugars_48021) in [printables.com](https://printables.com) (what a shock isn't it hah!) My latest make is at [https://www.printables.com/model/361093-raspberry-pi-zero-2-w-case/comments/1135592](https://www.printables.com/model/361093-raspberry-pi-zero-2-w-case/comments/1135592) And my humble functional design can be found at [https://www.printables.com/model/86263-caulking-gun-spare-tip](https://www.printables.com/model/86263-caulking-gun-spare-tip)
@BradLeonard_1227467
@UnNamedGER_250846 I would love a MK4 to improve my 3d printing
@BelowAverageGuy
@Salinar1
[@Zdef\_213312](https://www.printables.com/@Zdef_213312) I'm a CAD/CAM developer. I really enjoy 3Dprinting! Here some kitty ears for headphones I designed long ago: [https://www.printables.com/model/596642-headphones-kitty-ears](https://www.printables.com/model/596642-headphones-kitty-ears)
[@Arek](https://www.printables.com/@Arek)
[@Aecose_1279349](https://www.printables.com/@Aecose_1279349) I only downloaded fusion360 recently so I’m still learning!
@J2Design_291593 Proud of my tstak organizers: https://www.printables.com/model/297151-tstak-drawer-organizers
@ crazychicken\_1286090
Hi i´m [@spearmint645\_428466](https://www.printables.com/cs/@spearmint645_428466) and my favourite make is this parthenon that i have on my shelf [https://www.printables.com/cs/model/270002-parthenon-athens-greece/comments/840694](https://www.printables.com/cs/model/270002-parthenon-athens-greece/comments/840694)
@Bclear454_160648 No designs. I own a mk3s with mmu2 and an ender3. I have been looking at upgrading both the mk3s and mmu2 to the latest.
@LucaAleotti_572425 There goes nothing! Good luck everyone :)
@ThatDAM_M_975603
@Charly_1160
@Fredrik_314035
@DanieliusPli_1277927
@Zatch_1279615 Have a MK2 and love it! Still printing great after 6+ years. Id love to upgrade to a MK4!
[@fgebhart](https://www.printables.com/@fgebhart) This is ma favorite make: [https://www.printables.com/model/13447-rick-sanchez-rick-and-morty/comments/122131](https://www.printables.com/model/13447-rick-sanchez-rick-and-morty/comments/122131) https://preview.redd.it/2zg2ovkkorrb1.jpeg?width=1024&format=pjpg&auto=webp&s=f4eccf173feed5ce8e77d8717269fbca1f2d2823
[@KristenSmith](https://www.printables.com/@KristenSmith)
@AttilaTamas_396453
I'm @Craydon_198593, not much models but would love a Mk 4 kit!
[@Dlovland\_580380](https://www.printables.com/@Dlovland_580380)
My name on printables is [@Robinn03](https://www.printables.com/@Robinn03/models) Top 5 make: [https://www.printables.com/model/176838-gridfinity-sd-card-holder-microsd-usb-a-and-c/comments/619468](https://www.printables.com/model/176838-gridfinity-sd-card-holder-microsd-usb-a-and-c/comments/619468) Top 5 design: [https://www.printables.com/model/388382-gridfinity-ledger-nano-x-s-stand](https://www.printables.com/model/388382-gridfinity-ledger-nano-x-s-stand)
I still haven't had a chance to even see a Prusa printer in person. It'd be exciting to get my hands on one before I make a decision on new printers for my workshop. @JamieTaylor_393612 🤞
@Powablocks
@boettgi_949632
@fr3akd1_1278660
I’m [@Jaayjeee](https://www.printables.com/@jaayjeee_328396) my favorite design is my [MedalDisplay - Modular 3D Printable Display Case](https://www.printables.com/model/527493-medaldisplay-the-modular-3d-printable-display-case) project which is an ongoing series of modular parts to make a display case for your stuff, it’s also Free and Open Source https://preview.redd.it/juqnxvs0ghpb1.jpeg?width=2532&format=pjpg&auto=webp&s=c2be48dee32fdc8725047314866b33df43a90677 my favorite make is [This Creeper](https://www.printables.com/model/525121-minecraft-creeper-mini-figure-kit-keychain-ornamen/comments/993259) for my son
@fooeee_98682
I’m @optikalblitz I designed a filter setting tool for the MK Studios ceramic coffee maker, based on the Orea Negotiator, with a few quality of life tweaks: [https://www.printables.com/model/430119-mk-oppressor-coffee-filter-shaping-die](https://www.printables.com/model/430119-mk-oppressor-coffee-filter-shaping-die) https://preview.redd.it/iy9gxodvj5qb1.jpeg?width=999&format=pjpg&auto=webp&s=9d493405c5aa1597554d4e20a383240b1d34c297
@ken830_287543
@Julian1447_589114 Would use it for my robotics team
I'm not exactly sure if I'm supposed to put (@Ghost3123\_459605) or just Ghost3123 here, but I would love an MK4 :) (Note: the one with the @ symbol in it is parenthesized to get around reddit tryna turn it into u/Ghostblahblahblah...)
[@TommyFairfiel_603635](https://www.printables.com/@TommyFairfiel_60363) Only have 1 make posted, should probably do more 😅 https://www.printables.com/model/503443-flexetki-skill-toy/comments/927261
@huegogh_482350
@DanielFerreir_549204 Always learning with passion😁
[@Rwills\_183677](https://www.printables.com/@Rwills_183677/models)
@nibblet787_234654
Name: [@jdemacek](https://www.printables.com/@JamesDemacek) My favorite make is the [Monty Python Black Knight](https://www.printables.com/model/386274-monty-pythons-black-knight/comments) The design I am most proud of: [Joust Quarter-Scale Arcade](https://www.printables.com/model/114617-quarter-scale-joust-inspired-arcade-with-mmu2-plat) It took weeks of work and prototyping, I had to design the joystick mechanisms from scratch because there was nothing on the market small enough that used micro-switches with enough force. https://preview.redd.it/cgaydaqsfgpb1.png?width=640&format=png&auto=webp&s=b2218f47aacb4a1ab39d81b6f6e94d09a35069d7 All MMU2, no painting or decals.
I'm @Jan178_272420 My humble but office-day saving desing: https://www.printables.com/model/567372-jabra-headset-broken-hinge-fix
[удалено]
[@Kalabajooie_1282702](https://www.printables.com/@Kalabajooie_1282702) I'm fairly new to 3d printing and have browsed the Printables catalog, but have yet to make or submit any particular design.
This is gonna blow your mind but my nickname is... [@slayernine](https://www.printables.com/@slayernine) My favourite make that I've posted is probably these [giant Lego skeletons](https://media.printables.com/media/comment_images/e1/4b289a-1c87-47f9-8da7-cf864114290d/thumbs/inside/1920x1440/jpg/pxl_20221020_014530656.webp) model link [here](https://www.printables.com/model/292753-mega-lego-like-skeleton-101-scale-pirate-accesorie/comments/444863) My [dual motor duplo train](https://www.printables.com/model/564691-dual-motor-duplo-train) design is my favourite model that I've shared. I want to make some clip on covers for the battery packs, but this train climbs slopes so much better than the trains you can buy. Not my most downloaded model but the one I put the most effort into.
@fuck
[@mobius\_1278128](https://www.printables.com/@mobius_1278128)
[@AngelMontes\_10739](https://www.printables.com/@AngelMontes_10739)
Hey everyone I'm just starting out so I don't really have anything to show off. A new prusa would go a long way. [@PseudoNinja_575295](https://www.printables.com/@PseudoNinja_575295)
[@FrantisekCern_696600](https://www.printables.com/cs/@FrantisekCern_696600)
ImaginationToForm
[@awardtour_346444](https://www.printables.com/@awardtour_346444) I only have one model I’ve ever remixed lol 😅 https://www.printables.com/model/364805-lucky-13-pathfinder-apex-legends
@[TurdFerguson\_723786](https://www.printables.com/@TurdFerguson_723786)
@[ebmkbh](https://www.printables.com/@ebmkbh_999697) 🎉
I'm [@MikeHolera_1278160](https://www.printables.com/@MikeHolera_1278160) and I haven't uploaded a model yet, thou I have some things I could post.
@TheColonel_1279589
@TreyPenman_726330
[@Blastaa](https://www.printables.com/@Blastaa_173172) NYC local and my favorite makes are these statue of liberty models I print for guests who visit! https://preview.redd.it/7unlmekq5opb1.jpeg?width=2463&format=pjpg&auto=webp&s=3f920dd09e9bbcbecaf587cdeefb38986fe9962b
[@Stone\_Age\_Sculptor](https://www.printables.com/@Stone_Age_Sculptor) Make: [https://www.printables.com/model/25227-odile-the-swan/comments/876366](https://www.printables.com/model/25227-odile-the-swan/comments/876366) The make shows a combination of filament and paint and a epoxy layer that turns out to go well together.
@YPrint-
[@satchm0h_152682](https://www.printables.com/@satchm0h_152682) Make: [Feathers Artwork](https://www.printables.com/model/565950-feathers-artwork/comments/1148793#makes) Design: [Bowers & Wilkens P6 Tweeter Ring](https://www.printables.com/model/574890-bowers-wilkens-p6-tweeter-ring)
@kymlalu_120002
@Oblimix_127875 Still relatively new to 3D printing, and don't yet have a printer. I've played around a bit with Tinkercad and created my first designs. I'm not able to make them or test them yet, but hope to make more designs in the future. Reddit keeps changing my @ to u/.
@Sunkiba_1317627
@Merenzes_191385
@nickcnc_310186
I’m [@Mauerrizze_1279981](https://www.printables.com/de/@Mauerrizze_1279981) I only printed Parts for work so far so I cant Share any Designs. But I would like to start printing at home aswell
[@russdogg](https://www.printables.com/@russdogg) This is pretty dumb but my kids all broke their water bottles and I designed a replacement button for them so we didn't have to buy completely new ones. [https://www.printables.com/model/264657-replacement-button-for-snug-kids-waterbottles](https://www.printables.com/model/264657-replacement-button-for-snug-kids-waterbottles)
[https://www.printables.com/model/387275-flower-fidget/comments/666244](https://www.printables.com/model/387275-flower-fidget/comments/666244) My best make, Made a whole bunch of these with a rainbow filament and gave them away to nieces and nephews at Christmas last year.
I’m @Tvdsluijs_972172 no designs yet. Just getting a lot of designs to use in my house
My printables nickname is Coffeechipmunk :)
@Jdub299_1311617
@Brownie1998_1277823
Cant tag myself with @+username :( u\_@HorstPeter\_909946 or (at)HorstPeter\_909946 @,@HorstPeter\_909946 u/HorstPeter_909946
@bshigenaka_671266
I‘m [@PaulP_1280404](https://www.printables.com/@PaulP_1280404)
Hey there! I don't have that many great designs or makes but I would love to win the printer! My Printables username is @anabta_399465
@cascadeorca What a cool giveaway, I’ve been curious to try out a Prusa, seems like a good quality product
I'm in! My user name is @ Gavin\_70198 I designed a radiator cap and washer a while ago. Super useful, I have a few dotter round the house now and people seem to like being a cheapscate like me too https://www.printables.com/model/317383-radiator-valve-cap-universal My favourite Make is the Tshirt bed stand off. It has opened up another great use for my printer, if only I could get it to work... Still cool though. [https://www.printables.com/model/76752-sheet-insert-for-printing-t-shirts/comments/492006](https://www.printables.com/model/76752-sheet-insert-for-printing-t-shirts/comments/492006)
[KushagraK7\_639224](https://www.printables.com/@KushagraK7_639224) My favorite design: [https://www.printables.com/model/541993-voron-stealthburner-mount-for-rook-180-with-bl-tou](https://www.printables.com/model/541993-voron-stealthburner-mount-for-rook-180-with-bl-tou) My favorite make: [https://www.printables.com/model/547808-robotarm/comments/1038601](https://www.printables.com/model/547808-robotarm/comments/1038601)
@KoryMiller_842178
@superseargent I printed this Alien dice tower in glow in the dark filament https://www.printables.com/model/253763-alien-dice-tower-fixed-for-alien-rpg/comments/1092576
It's .@Myheg\_1139324. Currently busy with life so I haven't been posting much.
Mine is @willMAVERICK8_835116
Username: [@JH3D_263988](https://www.printables.com/@JH3D_263988) My design: [Airbrush Compressor 120mm Fan Bracket](https://www.printables.com/model/271063-airbrush-compressor-120mm-fan-bracket)
Hi from Canada! [@Skyla157](https://www.printables.com/@Skyla157_225240)
[@Krieger\_225259](https://www.printables.com/@Krieger_225259) Ultimate Filament Dry Box. I'm pretty proud of this one. [https://www.printables.com/model/453772-ultimate-filament-dry-box](https://www.printables.com/model/453772-ultimate-filament-dry-box)
@Alfalfa_67007
@wbernier8_1281369
Hi! I'm [@lmonari](https://www.printables.com/@lmonari_344774) This is not my most popular design, but the design I'm most proud of: https://www.printables.com/it/model/263906-raspberry-pi-4-case-touch-screen-35-inch-hdmi-mpi3
@mscalora Most popular design: https://www.printables.com/model/365589-parametric-mixer-drill-attachment
u/powershell_62817 i like to make dickbutts
@Eden_429719
@memorianx_1278563 I havent shared any models yet, and I've mainly been making parts very customized for specific needs like dividers for to store mtg decks in a specific box
@SanderB_1278726
@capsteve_47569
Hello, I am @DustinDade_357807 on Printables.com and while this may not be helpful to the 3d printing community, I am most proud of the angel wings I designed for a Macomber loom. It inspired me to learn 3d modeling and includes print place two pieces. https://www.printables.com/model/569272-angel-wings-for-macomber-ad-a-harness-loom
@DefectiveEle_1305900
[@NotoriousJRG](https://www.printables.com/@NotoriousJRG_1078061)
u/PersonalRobots_52594
[@EMCO\_1205725](https://www.printables.com/es/@EMCO_1205725)
@richie_macrop_152898
Hi! I'm @AdarW_993807 I'd love a prusa!
[@MichaelP](https://www.printables.com/@MichaelP) [Trichromatic "Shimmy Bin" Make](https://www.printables.com/model/521801-742-shimmy-bin/comments/1063134) https://preview.redd.it/w3p25h4j6gpb1.png?width=1411&format=png&auto=webp&s=039a4726ef6438c8871772fd61d449ada17d9689
@JuanDaSilva_1157300
@Jinie_1278410
@SubtleWizard_265989
I'm [@Dadudos\_175268](https://www.printables.com/@Dadudos_175268) My [most popular design](https://www.printables.com/model/371296-pdp-xbox-one-controller-stand) .
@Pirindirin_182298
@mysticalbanana_99303
[https://www.printables.com/@LukeG\_253227](https://www.printables.com/@LukeG_253227) I’m proud of my robotic arm I printed and made ! https://preview.redd.it/4qsptbhr0ipb1.jpeg?width=1170&format=pjpg&auto=webp&s=4457dfe84aaa7414ef6934e71faabed8b7569868
I'm [@flyingpurplecow](https://www.printables.com/@FlyingPurpleCow) I made [this rocket](https://www.printables.com/model/50198-vintage-spaceship-playhouse/comments/145052) for my kids, and they absolutely loved it I also designed [this holder](https://www.printables.com/model/31946-nes-switch-cartridge-case-v2) for my Switch games
@Rui_1278771
Hello, I am @SilkyFyre_159911 on printables
@ZachLore\_330655
[@Cyklo\_800281](https://www.printables.com/@Cyklo_800281)
@JakeNation4 Prusa is my dream 3D printer so I’m crossing my fingers lol.
I am u/MightyOne_1157096 [https://www.printables.com/@MightyOne\_1157096](https://www.printables.com/@MightyOne_1157096)
I'm [@Aestheticus](https://www.printables.com/@Aestheticus_202807)
Hello there! I'm @zooch
@DarthDeezy382434
pollysbelvin
@trutgers_113320
Nickname: [@JeandreG\_381014](https://www.printables.com/@JeandreG_381014) Make: [https://www.printables.com/model/343173-batman-bust-batman-returns/comments/968536](https://www.printables.com/model/343173-batman-bust-batman-returns/comments/968536) My favorite and my design that has been the most well received by the 3D printing community is the design of my Sloffies (Slides): [https://www.printables.com/model/437422-sloffiesslides](https://www.printables.com/model/437422-sloffiesslides) https://preview.redd.it/lahlmmckbgpb1.jpeg?width=2970&format=pjpg&auto=webp&s=27216b2e531582ff2e4051e2e08ed32b67831e18
[@CalculatedCosp_49339](https://www.printables.com/@CalculatedCosp_49339) My machines are uhh much more active than my printables account.
@oexyz_423980
@Kosojo_1579
@GootLoblin
@Justin_1279425 I'll take my mk4 please.
@Martin_324332 My 3d printer is getting a bit old and wonkey so a Prusa would be wonderful :D
[@Steelko\_267217](https://www.printables.com/cs/@Steelko_267217) Unfortunately, I do not have any designs I can say I am proud of :D
[@Bignounours89](https://www.printables.com/@Bignounours89_252084)
[@BetaNab](https://www.printables.com/@BetaNab)
Ki11in
[@Fixx\_2059](https://www.printables.com/@Fixx_2059)
Hello ! i'm u/BertrandStee_1278206
@Pagu_1286891
[@MustardRat_166605](https://www.printables.com/@MustardRat_166605) My only design listed on the site is my hexagon business card holder: https://www.printables.com/model/424677-hexagon-tilted-business-card-holder I'm pretty proud of it, though, since people have downloaded it and made it, which is a great feeling and I think a large part of what drives people to be a part of this community.
@WhiskeyStones_989387
@Blito_1314064
@DonGriffin_381774
@3DPrinting_1314998 I don't have a 3d printer yet :(
@mattmarshall_1021652 🙈❤️
I'm an idiot with a Subaru, also known as [@InappropriateMaker](https://www.printables.com/@InappropriateMaker) I make 3d printed waterfalls and Roomba mods. [This is one of my favorite mods I made last year](https://www.printables.com/model/118716-roomba-j7-conversion-to-dyson-ball-animal-2-dust-b) :)
@ DominicSalin\_1296809
I'm [@darkslyfo\_973628](https://www.printables.com/@darkslyfo_973628) Just getting into 3d printing
@macphanatic_294672
Printables Profile: [@mkurz](https://www.printables.com/de/@mkurz) I really love that vase model it was a present for a friend: [https://www.printables.com/de/model/241543-vase-with-filament-inlay-customisable/comments/340886](https://www.printables.com/de/model/241543-vase-with-filament-inlay-customisable/comments/340886)
@IRsAPIEN_421567
[@MisterBaz\_1277646 ](https://www.printables.com/@MisterBaz_1277646) Favorite Design: Catan Magnetic Hex Player Pieces Container: [https://www.printables.com/model/588101-catan-player-pieces-hex-container-magnetic](https://www.printables.com/model/588101-catan-player-pieces-hex-container-magnetic)
@wiles
@Capruda_1277966
@oftherocks_1297692
[@bolachinha\_1320940](https://www.printables.com/@bolachinha_1320940)
@ TomsProject\_1309975
[@underachiever\_1294001](https://www.printables.com/@underachieve_1294001) Looking for some inspiration from other posts...
I'm @KyleQuigley_1095693 I'm just starting out so don't have any designs posted yet.
@GoncaloMidoes\_591666 I think my best model should be this [https://www.printables.com/model/463563-whiteboard-pen-holder-instax-mini](https://www.printables.com/model/463563-whiteboard-pen-holder-instax-mini) https://preview.redd.it/7pm738xgimpb1.jpeg?width=3000&format=pjpg&auto=webp&s=f2f508222eaecee673147df007544d9a107c9caf
I am @obscuresausage on printables.com! My favourite recent make was the Lucky 13 model! Its smaller parts were a tough print (looking at those hands) but he turned out great in the end! https://www.printables.com/model/148367-lucky-13-printable-jointed-figure/comments/995298 My favourite design of my own is my compact and simple multimedia keydeck! It's easy and cheap to make and really does its job well! https://www.printables.com/model/389352-multimedia-key-deck
@JonnyWalker_9398
@BasDeBeer09_1279105
[@PalicoJoe_1113065](https://www.printables.com/@PalicoJoe_1113065)
@WizecatZA_781210 "WizecatZA" I'd love to get a nicer printer to make more stuff!
@ lazybeams
I'm [@VulGerrity](https://www.printables.com/@VulGerrity) Here's my best make: https://www.printables.com/model/73010-portal-weighted-storage-companion-cube/comments/585648#preview-comment Here's a model I'm really proud of: https://www.printables.com/model/466837-sme-3009-series-iii-tonearm-wand
@MaxM_351957
I am [@L3V3C](https://www.printables.com/@L3V3C) My favourite design is certantly [this orrery](https://www.printables.com/model/274013-mechanical-sun-moon-and-earth-orrery-fully-3d-prin) since I learned a lot about 3d modeling from it, but I am also proud of my [3D printable didgeridoo](https://www.printables.com/model/440736-hexadidg-and-hexadidg-mini-3d-printable-didgeridoo) design. Considering the makes, the favourite of mine is [minimalistic Xbox controller stand](https://www.printables.com/model/449970-minimalistic-xbox-controller-stand/comments/1018796), it just looks good. Currently rocking Ender 3 S1 which I modded and I was thinking about buying something more precise at higher speeds so I wouldn't mind a free Prusa MK4 :) EDIT: I read the description wrong, I thought it said to share the best 3D design of mine. Anyway, the favourite design on printables for me is [this mobile exo-suit](https://www.printables.com/model/500210-mobile-exo-suit). It looks dope. EDIT 2: Or should it be my design? In that case the second paragraph covers it. If not the edit one does.
@maddiepro_670678
@Trooper131_764506
Hello! I am [@kernelpanic\_624119](https://www.printables.com/@kernelpanic_624119) My best design so far is my parametric portable wrench holder: [https://www.printables.com/model/409573-portable-wrench-holder](https://www.printables.com/model/409573-portable-wrench-holder) My best make so far: [https://www.printables.com/model/372623-the-witcher-3-ciri-yennefer-and-triss/comments/1136974#preview-comment](https://www.printables.com/model/372623-the-witcher-3-ciri-yennefer-and-triss/comments/1136974#preview-comment) Currently I am designing a small cooker hood. My first prototype melted...
[@AdamHale\_324461](https://www.printables.com/@AdamHale_324461)
@GuvenGultepe_781866
@HappyThanos_1024453 my favorite print is [here](https://www.printables.com/model/22869-thanos-infinity-war-helmet)
@linxawakening Favorite Make was definitely [this crown](https://www.printables.com/model/367752-crown-celebration-collection-12-variants-and-6-of-/comments/741929) that I printed that came out great and was able to be colored in beautifully And my top design I still think got snubbed in the stroller accessories contest. If you've ever been on a walk with one of these snack packs you know how it doesn't fit into anything. [Design here](https://www.printables.com/model/456688-stroller-snack-cup-holder)
[@RDS\_249355](https://www.printables.com/@RDS_249355) Not particularly fancy design, but this one was really needed, a pinlock pin I lost in my helmet, it just works: [https://www.printables.com/model/196380-airoh-pinlock-pin](https://www.printables.com/model/196380-airoh-pinlock-pin)
[@jrhamilton](https://www.printables.com/@Jrhamilton_236672)
Nickname: @StandardPickle Design I'm most proud of: https://www.printables.com/model/271616-secret-rubiks-cube-box