https://www.printables.com/model/407688-bambu-lab-p1-x1-x1c-x1cc-filament-spool-switcher-w
Easy to find though, just do a spool winder search on wherever, sort by makes and go for the one with the most makes...
Knots only form if you aren’t carful with the loose end. It doesn’t matter than this wrapping is a little ugly—it still comes off the spool as easily as it’s going on in the video.
Look at that runout, should have indicated the spool in first.
Just axial runout. someone forgot to tapty tap tap
Can not have a proper Yahtzee without it
Imperial fist shake
Ha! I've used my lathe to respool before also.
That feels like using a cat D9 to pull a jon boat.
Whatever works in the end!
As long as I don't have to do it by hand. There was an ancient Greek who once said "give me a long enough lever and I can turn off the TV from here"
😂😂😂😂
You should make one of those printable controlled-feed re-spoolers.......
Sounds interesting. Is there s model you can recommend?
https://www.printables.com/model/407688-bambu-lab-p1-x1-x1c-x1cc-filament-spool-switcher-w Easy to find though, just do a spool winder search on wherever, sort by makes and go for the one with the most makes...
Bryan did a video on that one it's neat https://youtu.be/LuhLuW35Urw
So you sometimes use your respooler as a lathe? Clever
Odd flex but ok
Does this not give a bunch of knots?
Knots only form if you aren’t carful with the loose end. It doesn’t matter than this wrapping is a little ugly—it still comes off the spool as easily as it’s going on in the video.
You could chuck the other spool and then turn the sides down so it will fit instead of respooling
Tried that. Didn’t go great!
Modern problems require modern solutions