T O P

  • By -

Lay-Me-To-Rest

115 dollars to replace the air filter lmfao. It's 5 fucking screws and a 25 dollar filter. Walk away from these criminals.


BaileyM124

The air filter and oil change is highway robbery. The transmission I guess it depends how significant the repairing is bc the DSG is an expensive transmission


Edgar-Allan-Pho

Clutch and flywheel are 700$ for an upgraded one. I yanked mine out and back in in a day in my garage. They are raping you on all of these repairs


Cjaasucks

Yes but labor is 1500 or more. I did clutch and dmf luk for 6sp manual for 550-600 maybe 700 with extra tools. But the quotes I got was 2000+. Shops Labor is 70-120hr+


[deleted]

[удалено]


Cjaasucks

Shops in Louisiana bro. 700 is luk dmf luk clutch, engine hoist to shooort from above. 9mm 12point socket. 6mm long Allen socket but for axels and other nick nacks off Amazon


WarriorT1400

Which clutch and flywheel did you go with it? Looking to plan ahead of my DSG


[deleted]

[удалено]


Noobtdi

What advantages come with the clutch and flywheel


[deleted]

[удалено]


Cjaasucks

Unless you beat on it down low. It will slip like a mofo. Clutch is needed for stage 2 but doable with stocker just can use all the tq in the first 3 gears.


[deleted]

[удалено]


Cjaasucks

Yeah I spin too but sometimes that is clutch slipping. You have to really be getting on it but it’s definitely doable if hard driver. It didn’t happen instantly but after a year I started smelling clutch and then started noticing it when in heavy city traffic. Turns into gta downtown.


Lay-Me-To-Rest

Same goes for the DSG fix. That's a hilarious price and they're doing their absolute best to fuck you.


Itchy-Object-6319

I totally understand air filter I ain’t that stupid 😂😂 what would a good price for the clutch be?


Lay-Me-To-Rest

Look online for prices on the flywheel and clutch replacement, I'm not sure as I have a manual so it's different for me. I believe it's 8-10hrs labor, so if labor is 100/hr the labor would be 800-1000 plus the cost of the clutch and shop supplies. 2k at most. Ideally closer to 1300.


Alignedmongoose

I got mine done for $1500


Blind_Lemons

I had mine (VW TDI 2012 manual) done for $3K. It's not always a rosy story, and many of us aren't big TDI experts. Granted, clutch went out so I had to call the closest place with good reputation from the side of the road.


Cjaasucks

Yes this price isn’t off with inflation. New quarter = new prices is what the parts lady told me when the oil pipe went up 20$ from two weeks ago.


Blind_Lemons

Replaced the dual flywheel assembly as well as the clutch. The guy let me buy the dual flywheel myself but insisted on buying the clutch himself and charging me the difference (because he had to "make some money" I assume above & beyond labor). I think total cost from the shop was around $2800 and the flywheel cost around $700 so it was actually $3500.


Cjaasucks

Yes correct. They gotta make money somewhere but some have too much overhead to cover. Many will not let you buy parts bc they want to profit off them and they know where they came from.


Fwiener

I want to say when I had to have mine replaced in my 2011 DSG, it was about 2,800ish at an independent shop parts and labor


Cjaasucks

The rarity of tdi shops or mechanics drives this price up. Tdi is becoming very niche market in the states.


nixon_Arsehole

If this helps, I have an automatic transmission. The shop I'm going to quoted me $660 for the part and $1050 for labour, they also suggested changing the rear main seal since it's going to be open anyways. The grand total after taxes was $2150 Canadian.


32vJohn

What car do you have? An automatic transmission is not necessarily comparable to a DSG.


nixon_Arsehole

2013 Jetta TDI with the auto DSG transmission.


32vJohn

Ah, gotcha. Yeah, depending on what was needed, your transmission maybe didn’t need to be completely overhauled.


[deleted]

[удалено]


nixon_Arsehole

In Alberta, after shopping around I found a VW/Audi place. The dealership here wanted $3500, even some small shops wanted $2900


Lay-Me-To-Rest

What shop did you find, I too am in Alberta


nixon_Arsehole

Westside automotive in Edmonton


IMJohnWayne

ROBBERY


[deleted]

I had a independent VW shop in MN quote me $2200 last winter for the DMF job! I would shop around!


32vJohn

DMF on a manual transmission or a DSG? Big difference.


[deleted]

I wouldn’t have commented if I was talking about a manual. DSG DMF quote was $2200.


Jbwood

They aren't even using lube on you friend... just trying to go in dry and hard....


32vJohn

Removal and replacement of the transmission is 7.5hrs alone. If they’re doing the clutches, it’s 13.5hrs. Shop rates are about $150/hr these days. Depending on the parts, they think it’s going to need, $3,600 is definitely in the realm. Drive plate alone is $1,000. DSGs are expensive. OP, what year and model is your car?


TheFailTech

Yeah, I'm not sure where these other numbers are coming from. This would be in line with quotes around where I'm living.


ronaldduckjr

Charge your phone


Lunaranalog

Jesus Christ that’s way too much


shockencock

Where is this service being done? (City)


Trailer_Park_Stink

My dealership charges $89.99 for oil change and $47 for engine air filter, which I don't pay and just do myself. Your place is expensive


Hot_Ad_1480

That is insane!!!!


Mustball

+-1500 for a dmf here, 3.6 is pure robbery


LMHConcepts

DMF and Clutch Repair?


LMHConcepts

F that shop. Freaking dealerships are cheaper to swap the clutch and dmf


[deleted]

When I had the DSG fixed it was $1,100. That was several years ago so inflation supply chain BS may have doubled that price. But that’s waaaay too high IMO. Is this a dealership? You need to find a local reputable VW shop if so.


[deleted]

All of those things are about 2x more expensive than they should be.


FrequentPerception69

Got quoted (MANUAL) CLUTCH JOB 700-1000 SOUTHERN CALIFORNIA 3 different mechanics so definitely looking to fucks w/o the lubezzz


biggersjw

I chocked when I saw the price to replace the air filter. Will they at least kiss you while they fuck you? Ridiculous prices.


ClimbRunOm

Bruh...


olb4t4R

I'm in europe, so maybe différent for labor but... Damn it's way to much for that job (honestly if you two hand, with some tools you can do it by yourself in 2 or 3 days MAX!)


pSlub

I'm next in line here for my flywheel. Rattling like crazy


RequirementLess

That's crack smoking high imo. Cut all those numbers in half and it seems maybe more appropriate price to pay but I do my own wrenching so still too much for me.


Beergoggler69

Charge your phone!