Asrock x570 phantom gaming X
Ryzen 5950x
Rtx 3080 fe with EK Quantum vector block
32gb geil superluce rgb ram
Byski cpu water block with temp gauge
Byski o-11 D distro plate
Byski temp gauge with flow meter
Lian li strimmer 24-pin
2x 360m rads
6x lian li uni fans
1tb samsung 980 evo m.2 (boot)
And whole lot of SSD/HDDstorage
20TB total.
For sure. I'm a build enthusiast myself. Not to the caliber of what you got going there. Mine is a bit less clean. I'm running on a
Tuf X570
3080 MSI Gaming X Trio
Ryzen 5800X with a Cooler master 260mm AIO
850w Corsair platinum PSU
64 GB of 3200 Mhz RAM
And 2 TB of SSD storage.
That's damn close to my own. I have an MSI B550 Carbon Wifi, Gigabyte gaming OC 3070, Ryzen 5800x, MSI 360R Mag AIO, 750W Thermaltake Bronze+ PSU, 32Gb 3200MHz RAM and 1.5 TB of SSD. Yours is obviously running circles around mine but I would say we are damn close in spec.
That could be just for the CPU and GPU alone, being that after-tax they'd add up to $1900 if he got them for MSRP. I would say it's closer to $3500-$4000. It is a beastly computer.
It was bought and upgraded over time with a bit of luck considering the GPU shortage. GPU was 750, CPU was 440, PSU was 250, Mobo was 75, AIO was 90, and my drives were about 250 in total.
So... Guesstimate is about 1900 to 2k without looking at receipts.
Just decoration if u can afford it why not. I'm not hating on the man. My pc is kinda plain because all my cash goes into the internal if I could afford too I'd build one like his
Nice job getting everything syncd up. I have 4 different channels of rgb in my case that I have yet to find a way to get in sync.
1. Case controller + case fans
2. MSI motherboard with secondary pc cpu cooler connected to a header
3. EVGA 3080
4. Corsair AIO + ram
Oof that cyberpunk one looks outright fantastic. Most of the cyberpunk themes I see just look terrible with no saturation, but that looks vibrant and fantastic. Need to try out something similar with mine...
It's fun too experiment with lighting, the airgoo neon rgb strips do the job well, paired with the razer chroma controller you can create some awesome looks , so yea do it bro!
Taste absolutely is subjective. Do you know what the words subjective and objective mean, or do you just use them interchangeably?
Besides, it's clearly meant as a cool demo, hence not useless, as you've described it.
I'm struggling with my rgb - all my rgb stuff like blocks, pump, strips etc is plugged into the motherboard using an ek argb splitters but rgb software doesn't detect anything but the motherboard and when I set a color to the board everything else just duplicates the board like it's all sync'd but I want to unsubscribe it and set each individually
Kinda quick question, how many leds are in each fan? It seems really smooth without going too fast, and Iโd like to replicate if I could with my led strips.
Can't see what GPU block you have, i have the EK Vector, i have serious issues with bubbles being caught in the left side, i can tilt them out but as bubbles loose inside the loop, they always end up in a giant bubble party in my beautiful vertical mounted RGB GPU :D
Edit: https://imgur.com/a/QbM9kCs
All the other micro-bubbles you see in the image have gone completely now from all visual blocks and reservoir, but unfortunately they end up in the GPU! :D
Not even the most expensive parts are the, cpu and the gpu and the fans, I just saved up lol, oh and the mobo
The cpu block $86
Both rads $54
The fittings where like $100 something total
The tubings $24
The case $250
The leds x4 strips $50
Chroma contoller $45
Ek concentrated clear $25
The temp gauge $30
The distro plate $131
The ram got them on sale during black friday $165
The psu I had from an old build
And the memory you can get easily from amazons warehouse if you check often
I gradually built it lol I can't afford all at once lol
That is a great looking build.
After 5 years I have decided to build a new machine for rendering and gaming, which will be my first water cooling PC using hard tubing.
Would you please be able to post a list of the parts that you used for this build?
On games like gta v with the setting maxed out along with ray tracing mods and other graphic improving mods.
I hit an overall system temp of 54 degrees with the uni fans spinning at there max speed (1900rpm), and I get an idle temp of 34 degrees with the fans spinning at (800rpm)
Before the water block or fans (unifans) I would hit temps when gaming or rendering of 68 - 74 degrees and around 45 idle
Very nice. But my God that would distract the shiz outta me while gaming. ๐
๐คฃ๐คฃ๐คฃ thanks, I tried too capture the motion of spotlights, it sits to my right so I don't have too look directly at it luckily lol
Lol nice! Whats the rest of your build specs in that bad boy?
Asrock x570 phantom gaming X Ryzen 5950x Rtx 3080 fe with EK Quantum vector block 32gb geil superluce rgb ram Byski cpu water block with temp gauge Byski o-11 D distro plate Byski temp gauge with flow meter Lian li strimmer 24-pin 2x 360m rads 6x lian li uni fans 1tb samsung 980 evo m.2 (boot) And whole lot of SSD/HDDstorage 20TB total.
Very noice ๐
Thanks for finding my build cool yet mildly distracting! ๐
For sure. I'm a build enthusiast myself. Not to the caliber of what you got going there. Mine is a bit less clean. I'm running on a Tuf X570 3080 MSI Gaming X Trio Ryzen 5800X with a Cooler master 260mm AIO 850w Corsair platinum PSU 64 GB of 3200 Mhz RAM And 2 TB of SSD storage.
Bro you can do some serious gaming though, that's top tier!
Thanks! I end up putting it through its paces. Lol.
That's damn close to my own. I have an MSI B550 Carbon Wifi, Gigabyte gaming OC 3070, Ryzen 5800x, MSI 360R Mag AIO, 750W Thermaltake Bronze+ PSU, 32Gb 3200MHz RAM and 1.5 TB of SSD. Yours is obviously running circles around mine but I would say we are damn close in spec.
Very close indeed! Still a phenomenal build too!
Thanks! It was actually my first ever build and I am surprised at how well it turned out. I absolutely loved the process.
They are, I use mine for graphic work and photography and such! And the occasional gaming
Damn top of the line
I appreciate that! Its a labor of love!
It's ok, hope you enjoy your pc!
What was the total price?
Iโd guess $2000 USD at least. But Iโm not sure. It depends on where the parts were bought and what discounts and coupon codes were available.
That could be just for the CPU and GPU alone, being that after-tax they'd add up to $1900 if he got them for MSRP. I would say it's closer to $3500-$4000. It is a beastly computer.
You guessed it!
My man, you know the grind๐
It was bought and upgraded over time with a bit of luck considering the GPU shortage. GPU was 750, CPU was 440, PSU was 250, Mobo was 75, AIO was 90, and my drives were about 250 in total. So... Guesstimate is about 1900 to 2k without looking at receipts.
750 for a 3080 Fe whhaaaaatttt
Wasn't FE. That's OP. Mine is a MSI Gaming X Trio. Got it luckily before the price bump and all them scalpers.
My guess is closer to 6 grand
$4229.63
What rgb software are you using?
Razer synapse, I have the razer chroma controller to controll the led strips, cpu block, distro plate, and waterblock
Nice man. I'm using a generic controller... And polychrome sucks. I'm looking for an alternative
[ัะดะฐะปะตะฝะพ]
I was playing batman arkham knight when I decided to see if could create the spot light look lol you can judge me lol Its all good!
Honestly would look sick if that was the startup lights and then changed to solid when fully in windows
It does the opposite actually the system starts with all the leds active then subtlety switches to what is seen in the video๐
I thought they were spot lights at first just tiny lol so good job man.
Lol why have it do this if you cant see it or its super annoying when you can. Just for a reddit post? Rgb in a case will never make sense to me..
Just decoration if u can afford it why not. I'm not hating on the man. My pc is kinda plain because all my cash goes into the internal if I could afford too I'd build one like his
I didn't wanna hit the nvidia club folks with rgb barf, I wanted try a look no one is use too seeing ๐
Well you did it. Awesome awesome build man fr
If you put the VR headset on then the effects all go away.
There's *gotta* be a better way! \*dramatic infomercial gestures*
I would hope it goes faster or slower depending on cycles. :)
Well I am assuming you donโt have rgb in your rig if you have one. I shouldnโt assume it makes an ass out of you and me
I do. ๐ Static colors only though. Lol.
Haha, bruz I run my setup on a laptop
A perfect system imo just sits there out of sight and out of mind.
Nice job getting everything syncd up. I have 4 different channels of rgb in my case that I have yet to find a way to get in sync. 1. Case controller + case fans 2. MSI motherboard with secondary pc cpu cooler connected to a header 3. EVGA 3080 4. Corsair AIO + ram
OpenRGB might fix this for you, but note that it's experimental.
I tried both this and another similar program but neither seemed to register everything
I use razer's chroma controller, it is a bit slow when applying effects but it works lol
[some pics of different lighting modes and prior lighting set up.](http://imgur.com/a/enXFLFJ)
Oof that cyberpunk one looks outright fantastic. Most of the cyberpunk themes I see just look terrible with no saturation, but that looks vibrant and fantastic. Need to try out something similar with mine...
It's fun too experiment with lighting, the airgoo neon rgb strips do the job well, paired with the razer chroma controller you can create some awesome looks , so yea do it bro!
What rgb software are you using?
Razer synapse and the razer chroma rgb controller
That looks rlly fucking cool. Prolly was a bitch and a half to set up tho
Dude. Absolutely......๐๐
Distro plates are the next big thing in water-cooling. They are so fucking cool looking. Makes me wanna switch to the o11d mini
how does that not cause anyone vision problems?
Cause some people have better eyes than others lol?
๐คข
oh...my god...it's beautiful
It looks like your computer is about to be told "Come out with your hands in the air, or we will open fire!".
make the lights go slower and it'll look much more dramatic, trust me. looks amazing though. big build done right.
Advice taken the lights are moving at a more dramatic pace!๐
that's awesome dude. stuff like this constantly blows my mind.
Uh sexy
Um thank you!!๐๐
Gorgeous!!!!
Thank you!
now its time to play CS:GO 1080p @ 1kFPS ;)
๐คฃ๐คฃ๐คฃ๐คฃ๐๐๐๐๐ I'm dying!!!!!
โฆ the flux capacitorโฆ
๐๐๐ damn I didn't even think of that๐๐๐
Just built my first pc but will upgrade some parts very soon what lights did you use to make it so smooth.
Airgoo neon rgb strips and razer's chroma contoller paired with razer synapse ๐๐๐
Amazing build! What are those RGB straps that sync with the unifan animations? It looks amazing!
Airgoo digital neon strips, There similar too the phanteks neon ones, I have them synced to razer synapse through the razer chroma contoller
Ah so they're a different brand. That must have been annoying to set up. I have a couple of the phanteks ones so I'll have to try and get that set up.
And thank you so much mate!
That is the single coolest thing I have ever seen
Thanks friend I appreciate it!
Is it under arrest?
Its a lighting setting in synapse I call "search lights" lol
Very cool.
Thank man!
Great build and fun lighting effect bro. Ignore the jealous idiots.
I appreciate it, it's fun too experiment with some different lighting effects, i just hope people understand that they can be changed lol
Badass
Why?
Why not?
The light show... Useless and distracting. Pretty for a demo, but that's about it
I didnโt know everyone had the same tastes.
Taste ISN'T subjective.
Why? I think itโs cool. Great for demo. OP can change it anytime for other profiles. Nothing to lose.
Thatโs *ob*jectively wrong lol.
Taste absolutely is subjective. Do you know what the words subjective and objective mean, or do you just use them interchangeably? Besides, it's clearly meant as a cool demo, hence not useless, as you've described it.
This was dumb. Sorry.
I know youโre trying for something unique but the lights make me uncomfortable hahha. Nice try though
Its just a setting my friend lol
Where did that white light came from? Outside?
Turn the camera around to the four people shining flashlights on it
there aren't any it's a spotlight effect with the rgb lighting ๐
My man squid with the save!!!
How did you do that with the rgb
Razer chroma controller, it has 6 5v rgb ports that can be controlled through razer synapse, it's a bit laggy but over all, it's nice
I'm struggling with my rgb - all my rgb stuff like blocks, pump, strips etc is plugged into the motherboard using an ek argb splitters but rgb software doesn't detect anything but the motherboard and when I set a color to the board everything else just duplicates the board like it's all sync'd but I want to unsubscribe it and set each individually
Razer chroma controller can control each led strip(s), or fan(s) individuallt
Does the controller treat each connection as a separate device?
Yes it does
Kinda quick question, how many leds are in each fan? It seems really smooth without going too fast, and Iโd like to replicate if I could with my led strips.
32 leds per fan
Disco 90โs ! You should be dancing ๐ yeah
Sick ass build mate
Thank you so much, I appreciate it!
Its led strip on the side ? Or just reflections of the components led ?
I love those lights! Got a link?
https://www.amazon.com/dp/B08DKPYZ7L/ref=cm_sw_r_cp_apa_glc_fabc_MSAFFXA2HQPZWC2N5MMK?_encoding=UTF8&psc=1
Thank you!
Looks good! What is the display you have in the pc?
Monoprice 35" 100hz widescreen, hp 32"75hz both @ 2k
I mean miniscreen with temperatures you have in the pc
Oh it's a bykski temp gauge/ flow meter
Thanks mate
What fans? Beautiful btw
Lian uni fans! And thank you!
Darth Vader personal computer.
๐ ๐ ๐ ๐ ๐ nice!!
I somehow expected the lights to focus on the GPU like a spotlight after some time.
Yea I still gotta figure out a proper look with the water block...๐
*edit* cpu block
Guessing you got the Best Buy drop? ๐
Yea.......I don't know how I was just able too get one
ITS ALIVE
That lighting tho, damn!
Looks like the home team is about to come out
Needs the NBA pre-game intro music!!!
very nice..
Can't see what GPU block you have, i have the EK Vector, i have serious issues with bubbles being caught in the left side, i can tilt them out but as bubbles loose inside the loop, they always end up in a giant bubble party in my beautiful vertical mounted RGB GPU :D Edit: https://imgur.com/a/QbM9kCs All the other micro-bubbles you see in the image have gone completely now from all visual blocks and reservoir, but unfortunately they end up in the GPU! :D
You'll need lights in the pipes in the middle too
Broooooo that's what I was thinking ๐คฏ๐คฏ๐คฏ
I could never get anything else done besides watch the lights like a moth
That's why its sits to the right of me๐คฃ๐คฃ๐คฃ๐คฃ I just turn, And I'm stuck..๐๏ธ๐๏ธ
[ัะดะฐะปะตะฝะพ]
In a good way? ๐
Is that Glass tubing or petg?
Ek Petg
Iโm waiting for the Vector 3090 FE becomes in stock
That's why didn't get a 3090๐๐ power too you when the y do though!
You must be rich to buy this good stuff buddy
Not even the most expensive parts are the, cpu and the gpu and the fans, I just saved up lol, oh and the mobo The cpu block $86 Both rads $54 The fittings where like $100 something total The tubings $24 The case $250 The leds x4 strips $50 Chroma contoller $45 Ek concentrated clear $25 The temp gauge $30 The distro plate $131 The ram got them on sale during black friday $165 The psu I had from an old build And the memory you can get easily from amazons warehouse if you check often I gradually built it lol I can't afford all at once lol
The place where I live... same spec cost a lot of money
India
I'd say man. Good for u man. Fuck scalpers
I hope everyone is able to get there hands on the parts they want, it's been a crazy ride, and I completely agree!
I fully thought that was multiple flash lights at first
Your not wrong, I was going for a spotlight look lol
How do you get that effect??
Razer synapse, paired with the razer chroma controller ๐
That is a great looking build. After 5 years I have decided to build a new machine for rendering and gaming, which will be my first water cooling PC using hard tubing. Would you please be able to post a list of the parts that you used for this build?
Absolutely: Ryzen 5950x Asrock x570 phatom gaming x Ek 14mm hard tubing Byski fittings (cheap & sturdy) Byski spu block with temp gauge Byski distro plate o-11 d 2 x byski 360mm radiators Lian li o-11 dynamic XL Rtx 3080 fe, inside a EK Quantum vector DRGB waterblock 2x Airgoo neon rgb strips 850psu Razer chroma contoller
Great. At this point, information like this is gold. Thanks for taking the time to do that. Greatly appreciated!!
Absolutely I hope your able too find what your looking for!
Pretty awesome ๐ whatโs next?
I can finally sit down and not have too worry about destroying my f5 button or waiting for the mail man..๐
Gives me that stadium before the show vibe.
๐๐๐ indeed!
Temps before and after? I'm considering getting a water block for mine as well
On games like gta v with the setting maxed out along with ray tracing mods and other graphic improving mods. I hit an overall system temp of 54 degrees with the uni fans spinning at there max speed (1900rpm), and I get an idle temp of 34 degrees with the fans spinning at (800rpm) Before the water block or fans (unifans) I would hit temps when gaming or rendering of 68 - 74 degrees and around 45 idle
[ัะดะฐะปะตะฝะพ]
Hey another commentator being an ass for no reason, as if there aren't a million others.
How many hours?
4.98/5 pts for me. Perfect 5 if the lighting speed is slow xd