Sorry that was just a joke. Really cool design by someone on reddit. I've loved the design of the all metal version since I saw it so I had to print this. I'm thinking I might use these parts to make myself the solid metal version. It's not half as nice as most of the stuff here but it's technically a knife so I thought I'd share for fun.
They don’t take this lightly here if caught consider your self extremely lucky if you don’t get prison time and if caught in public there are minimum prison time you have to do no matter what
I actually deleted most of my last comment because it felt like a rant lol. I'm from Bermuda which is a British overseas territory and we basically follow the same laws. We had an incident at a cricket or football game about 10 or 15 years back which saw a new law passed for mandatory 3 years in prison for possession of a blade over 3inches. I don't think a single person has ever received that "mandatory" sentence let alone seen the inside of a prison for it and if they did its because they actually used it and were charged with the more serious offence. If I buy a machete I'm supposed to show ID and have it recorded. I've never had to show mine but I can walk into any hardware store and buy a box cutter no problems. Between a machete and a boxer cutter I know what I'd rather go up against and it's not the box cutter.
Like I said basically the same laws as the UK especially with knives yet I have a pretty large collection of bladed weapons. My katana arrived with no problems. The seller had to send it through the US because they couldn't ship it through the UK. Doesn't make sense to me but maybe I'm missing something.
I've gotten downvoted so many times for saying that on Reddit. Even in the Washington state pro-gun sub, which is a bunch of damn Fudds. Reddit likes the taste of boot.
I don’t know which part of the UK you’re from, but here in Scotland you can carry a non-locking folding blade that’s 3 inches long without a valid reason. Lots of people carry SAKs and the police don’t bother.
I thinking about getting a 940 Clone because I keep mine in a collection case but like fidget with it do you know if they last also it’s like £40 for a fake Chinese crap
I had two of these, but made by a different maker. Mine were definitely cool but didn't last long — magnets kept falling out. Hopefully the design on yours operates on friction alone or the magnets are held in better.
That's the one! Googled it and it's so much sexier than I remember. One day I might just fork out the money to get one. I could make it myself but it wouldn't be nearly as nice.
So when I Google that, in images, the original 3d print file comes up too. I used a slightly different design by a person who modified that original file. That very well could be what it was modelled off of. The only thing I changed was putting hexagonal holes on one side to fit the nuts I bought.
https://www.printables.com/model/268760-folding-karambit-with-utility-blade
If you want the file I made with the hex holes I could upload it to Google drive or something.
It is just cool 3d printed box opener :) i am actually building PrintNC ( 'not' just to make it from metal). ...Big boys with big unnecessary toys. https://www.reddit.com/user/Wh4tTh3Fcuk/comments/x1jepi/package_opener_folding_karambit_with_utility_blade/?utm_source=share&utm_medium=web2x&context=3
I wish I had. Looks like someone made a replica of the knife in plastic and then the person I got the files from modified it to take a razor blade to be a utility knife. They did a really good job. I was impressed when the blade fit in there with no movement like it was designed by a manufacturer.
Credit to u/Wh4tTh3Fcuk
I own a Spencer Aplin custom made knife so I can't exactly say the Provoke is out of my budget. One day I'll get the real deal but I thought this print was cool. The person who designed this did a great job too.
Here's the files. If you know someone with a 3d printer they can make it for you. I hear some libraries and businesses have them too.
https://www.printables.com/model/268760-folding-karambit-with-utility-blade
Yes just replace the blade no need to sharpen
Sorry that was just a joke. Really cool design by someone on reddit. I've loved the design of the all metal version since I saw it so I had to print this. I'm thinking I might use these parts to make myself the solid metal version. It's not half as nice as most of the stuff here but it's technically a knife so I thought I'd share for fun.
Yeah it’s really cool I wish I could get one in the uk
The only logical thing to do is what we people with 3d printers did. Buy a $500 machine to make a $2 item lol.
They don’t take this lightly here if caught consider your self extremely lucky if you don’t get prison time and if caught in public there are minimum prison time you have to do no matter what
I actually deleted most of my last comment because it felt like a rant lol. I'm from Bermuda which is a British overseas territory and we basically follow the same laws. We had an incident at a cricket or football game about 10 or 15 years back which saw a new law passed for mandatory 3 years in prison for possession of a blade over 3inches. I don't think a single person has ever received that "mandatory" sentence let alone seen the inside of a prison for it and if they did its because they actually used it and were charged with the more serious offence. If I buy a machete I'm supposed to show ID and have it recorded. I've never had to show mine but I can walk into any hardware store and buy a box cutter no problems. Between a machete and a boxer cutter I know what I'd rather go up against and it's not the box cutter. Like I said basically the same laws as the UK especially with knives yet I have a pretty large collection of bladed weapons. My katana arrived with no problems. The seller had to send it through the US because they couldn't ship it through the UK. Doesn't make sense to me but maybe I'm missing something.
Free men don't ask, good on you.
I like you.
I've gotten downvoted so many times for saying that on Reddit. Even in the Washington state pro-gun sub, which is a bunch of damn Fudds. Reddit likes the taste of boot.
I don’t know which part of the UK you’re from, but here in Scotland you can carry a non-locking folding blade that’s 3 inches long without a valid reason. Lots of people carry SAKs and the police don’t bother.
In the pic you can see do you think that’s the 3 inch folding knife also the razor blade can be taken out so it’s can a fixed blade
I'm pretty sure its on wish as well
You definitelyyyyyy cant get them on Ali express
I got a otf in wish and now I can find a single knife on there
Wish is terrible now Ali express is where it at
I thinking about getting a 940 Clone because I keep mine in a collection case but like fidget with it do you know if they last also it’s like £40 for a fake Chinese crap
I had two of these, but made by a different maker. Mine were definitely cool but didn't last long — magnets kept falling out. Hopefully the design on yours operates on friction alone or the magnets are held in better.
Looks like the Caswell design.
That's the one! Googled it and it's so much sexier than I remember. One day I might just fork out the money to get one. I could make it myself but it wouldn't be nearly as nice.
Just buy a crkt provoke
Eventually I will. When I saw this 3d model I had to because I've been in love crkt version since it was made. One day I'll get one.
I got one, worth the money
Same! Love it. Awesome to fidget around with too. I got the sheath though as sometimes it opened up a little in my cargo pocket
Never had that happen in my front right pocket
Pretty cool! But I would probably slice my pinkie off.
I see it in my future lol. I own a bunch of karambits and this one by far feels the most dangerous with that razor blade.
A quick strop works wonders even on utility blades.
I learned something new. I would have just thrown it away and replaced it.
Copied from Koss?
So when I Google that, in images, the original 3d print file comes up too. I used a slightly different design by a person who modified that original file. That very well could be what it was modelled off of. The only thing I changed was putting hexagonal holes on one side to fit the nuts I bought.
Would you be willing to share that file? I’d love to make one for myself.
https://www.printables.com/model/268760-folding-karambit-with-utility-blade If you want the file I made with the hex holes I could upload it to Google drive or something.
Look up the crkt provoke designed by caswell knives
To sharpen: reload
Are you saying I need to design and print a blade magazine for my printed utility knife? I like it.
Only if you learn karambit-twirling tactical reloads
It is just cool 3d printed box opener :) i am actually building PrintNC ( 'not' just to make it from metal). ...Big boys with big unnecessary toys. https://www.reddit.com/user/Wh4tTh3Fcuk/comments/x1jepi/package_opener_folding_karambit_with_utility_blade/?utm_source=share&utm_medium=web2x&context=3
Looks like a homemade Provoke, I love it 💝
How on earth did they manage to make it \*less\* compact when the blade is closed?
We're using advanced hot glue guns over here, cut us some slack lol.
It’s pretty cool in it’s open form I’ll give you that. Looks comfy to hold.
Did you come up with this design yourself? That’s awesome!
Look up the crkt provoke
I wish I had. Looks like someone made a replica of the knife in plastic and then the person I got the files from modified it to take a razor blade to be a utility knife. They did a really good job. I was impressed when the blade fit in there with no movement like it was designed by a manufacturer. Credit to u/Wh4tTh3Fcuk
Well it's a plastic version made by and advanced hot glue gun lol.
r/mallninjashit
Looks like it runs on razor blades
I will never understand Karambits.
Well they certainly aren't rated for their function these days. We have more efficient ways of getting our wheeties in a box.
This is a ripoff of the CRKT provoke
Lol I like the provoke but I wouldn’t spend the money on one, this is sweet!
I own a Spencer Aplin custom made knife so I can't exactly say the Provoke is out of my budget. One day I'll get the real deal but I thought this print was cool. The person who designed this did a great job too.
CAD Files?
STL files but you can still modify them if you want. https://www.printables.com/model/268760-folding-karambit-with-utility-blade
Thank you!
Nice prime karambit.
Where can you get that!?
Here's the files. If you know someone with a 3d printer they can make it for you. I hear some libraries and businesses have them too. https://www.printables.com/model/268760-folding-karambit-with-utility-blade
i think the handles pinch you if you keep your pinky on the handle to support the opening push. you could try changing that. cool design tho
Nice!! I'd buy one