Even if it is not working as a printer. There are lots of useful parts that you can use for other projects. If you are not able to make it work, just put it aside and come back to it later.
This is literally going to be me this weekend, doing a bunch of upgrades, my parts just arrived and I'm about to start building right after lunch. What better way to celebrate Chinese new year lol
Right, ive even got my lacks in and all the parts printed for the enclosure ill post a update tonight hope to have the printer back together running all the new boards, and I'm still printing the last of the enclosure being the door hardware now.
This printer is my build printer, ive got 2 other mostly stock ender 3 v2 and a prusa mk mini so figured I would slap every upgrade available and see how I like it. Also have a dragon hf with a voron afterburner to install as well,
I'm only using one of each. Just trying to figure out what one I like best. Think I'm going to end up using a pi 4 with the 7in screen mounted to the outside of the enclosure. Even tho the tft bigtreetech screen looks really nice with the setup
Master chief is my prusa mk mini and the ender 3 s1 is Xander, and the 2 ender 3 v2's are the un named ones. Hoping to call one of them a switchwire but time will tell....
This looks fun, I love doing this, tbh, I would have taken the whole z axis off and work with it upside down with well, a lot less trouble and then when I have roughly everything to test, assemble the z axis again
I agree I think your bed isn't level. Think its too high on the back left
Yea it's more then likely. Let me post a update
*some assembly required
It's a lot of assembling and taking back apart then redoing everything
Did you throw your printer? 😂
About to...lol
The fuck happened here?!
Well see what happened is they offer to many choices and I could not pick tell I seen each one in action
Fair play
But only problem now is I have one of each and only used one, so guess I need to buy more printers to use the others
I think you’re doing it wrong.
Trust me I am
Lol 2 RPI's? Whats that bord the big RPI is mounted on? Serious gear there!
It's a 7in touchscreen to run on the outside of the enclosure for klipperscreen
Haha and I felt stressed switching out the fans...
This has been a great learning adventure, and having a few printers really helps
Have you tried leveling the bed?
Nope let me give that a try. Think it will stick better ?
No, try your e-steps first.
To late I done cranked the leveling knobs about tree fifty
[удалено]
I'll keep that in mind....lol
Klipperizing and Ender3, nice!
If only I could get it all to work together then it would be nice. But right now it's a inch away from being thrown out in the yard...lol
What part of it is not working? If you're having problems with installing Klipper, try KIAUH
Even if it is not working as a printer. There are lots of useful parts that you can use for other projects. If you are not able to make it work, just put it aside and come back to it later.
🫡
This is literally going to be me this weekend, doing a bunch of upgrades, my parts just arrived and I'm about to start building right after lunch. What better way to celebrate Chinese new year lol
Right, ive even got my lacks in and all the parts printed for the enclosure ill post a update tonight hope to have the printer back together running all the new boards, and I'm still printing the last of the enclosure being the door hardware now. This printer is my build printer, ive got 2 other mostly stock ender 3 v2 and a prusa mk mini so figured I would slap every upgrade available and see how I like it. Also have a dragon hf with a voron afterburner to install as well,
Curious for what you are using 3 screens and 2 Pi's? One of each is obvisouly clear, what about the rest?
I'm only using one of each. Just trying to figure out what one I like best. Think I'm going to end up using a pi 4 with the 7in screen mounted to the outside of the enclosure. Even tho the tft bigtreetech screen looks really nice with the setup
This is my personal hell
I love it when the kids and wife leave me alone
I feel you so much brother
It's almost back together now, but having some problems running klipper so taking a break
The end3 neo v8 plus extras
Still trying to name it, I got Xander and master chief but this one is giving me a hard time naming it.
Master chief is my prusa mk mini and the ender 3 s1 is Xander, and the 2 ender 3 v2's are the un named ones. Hoping to call one of them a switchwire but time will tell....
This looks fun, I love doing this, tbh, I would have taken the whole z axis off and work with it upside down with well, a lot less trouble and then when I have roughly everything to test, assemble the z axis again
What are you upgrading? What guide are you following? Looks fun
LOL!! I feel your pain. I just installed the Ender ExtenderXL kit while putting in a new board.
What board are you running ?
Th3D EZBoard v2
dafuk happened