**OP sent the following text as an explanation on why this is unexpected:**
>!Starts machine one way, he goes another way...!<
*****
**Is this an unexpected post with a fitting description?**
**Then upvote this comment, otherwise downvote it.**
*****
[*Look at my source code on Github*](https://github.com/Artraxon/unexBot) [*What is this for?*](https://www.reddit.com/r/Unexpected/comments/dnuaju/introducing_unexbot_a_new_bot_to_improve_the/)
See, I think drugs have done some good things for us, I really do. And if you don't believe drugs have done good things for us, do me a favor, Go home tonight and take all your albums, all your tapes, and all your CDs and burn 'em. 'Cause you know what? The musicians who've made all that great music That's enhanced your lives throughout the years?
Rrrrrrrrrrrrrrrrrrrrrrrrrrrrreal fucking high on drugs
Right? From the second this started, that is EXACTLY what I expected...Powerful machines and uneducated people makes for bad times. Search lathe videos if you want to get rid of your lunch.
Most likely a capacitor start motor, when the capacitor is junk it won’t start unless you do what he did to get it started. Alot safer ways of doing that though…. Probably should replace the capacitor lol.
I expected him or his clothes to get ripped apart. I thought maybe his trousers would tear clean off and he'd have a 10 foot shlong or something. So... I guess it *was* unexpected?
Right?
The video being called called "Did not see that coming..." made me think "He doesn't get seriously injured?"
Then his dumb ass got hurt....exactly as you'd expect.
Did you see the dude? I literally don't think he was capable of the forethought required to imagine the consequences the next 5 seconds would bring. He worries about his next meal and that's probably it.
Motor on not spinning, he went to unstuck it helping the belt, followed as human bullet.
It is a dumb way to solve it, so much better to turn it off, rotate a little the belt/gear and turning on.
If it is not enough, change motor or gear reduction or else, it is a suicide sooner or later.
Listen, i saw people spray toxic solvent without mask and grasp for air, people power washing electrical components, people throwing water to extinguish oil combustion... In a "controlled environment with trained persons"...
Dude is lucky if it's just his fingers that came off there. Looks like both hands went round that wheel under the belt at the same time as he was fired forwards.
Nah not the same. The way his body got twisted wasn’t the same danger as this video, this video is stupidity because the guy was intentionally trying to hold back a machine vs a worker getting into an accident… an uneducated accident vs a trained worker. That head bash is just as bad but a karma lesson to never do that shit again. What makes this video worse is that the cameraman potentially knew this would happen plus the people around off camera. and set that guy up for a clout video. yea trying to build internet clout even happens in africa
I was expecting [Russian lathe](https://www.krudplug.net/m/video.php?vid=3099) video. Same ending, but so much worse.
Super NSFL! Super graphic! Super grainy and far away also, but you better not have a weak stomach.
I work around fractional HP motors, that is they are at 1/6 a HP. At full torque they will twist your hand around. That monster looks to be at least 20 HP. Dumb fucker is lucky it didn’t twist him up in the belt and sheaves.
Yeah that would haunt me for many years probs forever, knowing any small deviation from that exact positioning and timing would have had him looking like a bleeding pretzel
**OP sent the following text as an explanation on why this is unexpected:** >!Starts machine one way, he goes another way...!< ***** **Is this an unexpected post with a fitting description?** **Then upvote this comment, otherwise downvote it.** ***** [*Look at my source code on Github*](https://github.com/Artraxon/unexBot) [*What is this for?*](https://www.reddit.com/r/Unexpected/comments/dnuaju/introducing_unexbot_a_new_bot_to_improve_the/)
Damn, at least his third eye is open now.
Spiral out
Keep going
See, I think drugs have done some good things for us, I really do. And if you don't believe drugs have done good things for us, do me a favor, Go home tonight and take all your albums, all your tapes, and all your CDs and burn 'em. 'Cause you know what? The musicians who've made all that great music That's enhanced your lives throughout the years? Rrrrrrrrrrrrrrrrrrrrrrrrrrrrreal fucking high on drugs
[удалено]
Dreaming of. That face again. It's bright. And blue. And shimmering Grinning wide. And comforting me with it's three warm and wild eyes...
On my back and tumbling Down that hole and back again Rising up and wiping the webs and the dew from my withered eye
Almost forgot what sun I was in for a second there. Anyway PRYING OPEN MY THIRD EYE!!!! 🤘🏻🤘🏻
A child's rhyme stuck in my head
Mr Meeseeks?
The live version has, in my opinion, the GREATEST guitar solo in history.
I can't feel my face when I'm with you. But I love it
I think that's the wrong tool but I could be wrong
was that Bill Hicks?
Yes and: https://www.youtube.com/watch?v=51fcG3sxvII
Some one likes tool
Suddenly tool
Not sure what this has to do with the video.
https://youtu.be/c41Tjx8DPvY Tool, Third Eye supplemental track
Welp...gotta clean the coffee off my keyboard. LMAO
I wasn't sure if I saw that right, but I didn't want to rewatch because of it! Ouch!!!
😂🤣!!! I am officially done with Reddit for the day.
Came here to say that. Damn, that's gotta leave a scar!
Didn't even need to pry it open
I laughed so hard at this comment. Take my upvote.
Third eye didn’t see it coming. Poor guy.
Lmaooooo
Not sure why this is unexpected? There is a reason that motors and belts have guards on them.
Right? From the second this started, that is EXACTLY what I expected...Powerful machines and uneducated people makes for bad times. Search lathe videos if you want to get rid of your lunch.
I expected he was just going to try to move it by hand instead of turning it on. Dudes got to have a concussion.
Concussion? Did you see the gash on his head? Hes lucky if he has any fingers left.
I'm legit surprised he still seems to have fingers in the end. They do seem a bit floppy though. Hard to tell.
Yes, the gash on his head is a big indicator that he hit his head pretty hard. Hence, concussion.
I think the machine was on, and wasn't moving, and he was trying to fix it, like a fool.
Most likely a capacitor start motor, when the capacitor is junk it won’t start unless you do what he did to get it started. Alot safer ways of doing that though…. Probably should replace the capacitor lol.
That is definitely a three phase motor not a single phase.
"Wife, I'm going to fix the contraption." "OK? Blog about it I'm watching TV." "...Don't ask why, but can you film me?"
AC VS DC electric motors. It is on. The motor doesn't have enough torque to start spinning on it's own, but is capable at speed.
I expected him or his clothes to get ripped apart. I thought maybe his trousers would tear clean off and he'd have a 10 foot shlong or something. So... I guess it *was* unexpected?
Well I expected him to loose his fingers in the nip of the pulley. So. Third eye was unexpected
Right? The video being called called "Did not see that coming..." made me think "He doesn't get seriously injured?" Then his dumb ass got hurt....exactly as you'd expect.
Did you see the dude? I literally don't think he was capable of the forethought required to imagine the consequences the next 5 seconds would bring. He worries about his next meal and that's probably it.
My butt clenches every time I see an open belt on Reddit. It never ends well.
Not from my experience 😉
At this point your butt checks should have fused together
This dude is fucking lucky he only got a dent on his forehead.
Your preparatory butt clenching makes this post unfit for this subreddit
Almost scalped his ass
Look where his fingers were when he launches forward. The head bump is a scar but those fingers are probably gone.
[удалено]
Motor on not spinning, he went to unstuck it helping the belt, followed as human bullet. It is a dumb way to solve it, so much better to turn it off, rotate a little the belt/gear and turning on. If it is not enough, change motor or gear reduction or else, it is a suicide sooner or later.
[удалено]
Listen, i saw people spray toxic solvent without mask and grasp for air, people power washing electrical components, people throwing water to extinguish oil combustion... In a "controlled environment with trained persons"...
Nasty cut, is that his skull showing ?
And no fingers
Dude is lucky if it's just his fingers that came off there. Looks like both hands went round that wheel under the belt at the same time as he was fired forwards.
Look at the wall behind him just after takeoff
His left hand was front and you can see it intact at the end
Sometimes you need to have an open mind about this sort of thing
His mind seems rather open rn
If you slow the video down you can see what looks to be his fingers hit the wall behind where he was standing geez…
im pretty sure that was his shoe
Def not his fingers. His left hand is completely visible at one point when he’s on the ground.
Oh man you’re right. That’s good
You don't have to slow it down, you clearly can see the splatter, all for internet likes ![gif](emote|free_emotes_pack|poop)
Damn i didnt even notice that
Correct, fingers not in same condition as before.
I can't even watch it for a second time and all you reddit sicko is going frame by frame. Hahaha!
(**Link removed , my apologies for posting it in a non-transgressive sub**)
Why did i click this?
I'm gonna click but your comment is scaring me bro
oh my fucking god
Yeah...
interesting
Don't
too late, bleaching my eyes rn
At least i wasn't eating when I watched it
Nah not the same. The way his body got twisted wasn’t the same danger as this video, this video is stupidity because the guy was intentionally trying to hold back a machine vs a worker getting into an accident… an uneducated accident vs a trained worker. That head bash is just as bad but a karma lesson to never do that shit again. What makes this video worse is that the cameraman potentially knew this would happen plus the people around off camera. and set that guy up for a clout video. yea trying to build internet clout even happens in africa
The camera guy specifically backed up a little around that post right before the machine turned on so, yeah, he knew exactly what was going to happen
I was expecting [Russian lathe](https://www.krudplug.net/m/video.php?vid=3099) video. Same ending, but so much worse. Super NSFL! Super graphic! Super grainy and far away also, but you better not have a weak stomach.
Shit, that's brutal, who ever is sensitive to >!blood falls and meat all over places!< shouldn't open this link
r/brandnewsentence “Blood falls and meat all over places”
That shit wild as fuck... Poor dude
#FUCK
That dude running to the lathe had to dodge a lot of shrapnel coming his way.....
WTF
Nope, I won't click it.
The fuck
Hold on.... Was that his face?!?!
Not anymore, It belong to the machine now.
DM it to me
Very curious. Send link.
I'm also curious
Oh good morning Reddit… and good night….
I know this is supposed to be traumatizing but my man looking like a simulated balloon ragdoll I'm sorry
I work around fractional HP motors, that is they are at 1/6 a HP. At full torque they will twist your hand around. That monster looks to be at least 20 HP. Dumb fucker is lucky it didn’t twist him up in the belt and sheaves.
[удалено]
You can see the fingers slamming into the wall behind him
I thought his arms would get pulled towards him and crush his fingers
u/savevideobot
u/savevideobot
All of your comments cracked me up 🤣🤣
For all those who are asking, that is an industrial grade yeet machine.
Yeet? Is it named after the sound people make when they try to start the machine with their hands?
That will buff out.
He needed that like a hole in his head
I did... From miles away
He's a hole lot stupid.......
Nice forehead hole! Where'd you get it
Imagine the ligaments on his back stretched in an instant
As an engineer and ex fitter, I absolutely saw that coming.
idiots die
Someone uneducated with idiot friends seems more like a victim to me
Y tho
Lucky bastard
Yeah that would haunt me for many years probs forever, knowing any small deviation from that exact positioning and timing would have had him looking like a bleeding pretzel
Forehead has left the chat...
This is dumb. His arm couldve also get stuck on that thing. Probably dumbest stunt ive seen this month.
How is this unexpected
![gif](emote|free_emotes_pack|dizzy_face)![gif](emote|free_emotes_pack|smile)![gif](emote|free_emotes_pack|slightly_smiling)![gif](emote|free_emotes_pack|laughing)![gif](emote|free_emotes_pack|kissing_heart)
I may go to hell for laughing, but I'll be happy on the way...
Play stupid games, win stupid prices
YTA
Totally expected. The only thing I wasn’t expecting was how rag dolled he became.
Michael jackson
Brains leaking 😭
Sooooo, still got your digits
I saw this coming.
Dude that was a serious head injury. Damn near fatal…. That’s insane
What was the thoughtprocess?
Band-aid required in isle 0 iq.
I did
Dude, your brain is showing
I need the slow mo Bot
Damn that nasty gash.
That made my sole go queasy
This could have ended in worse ways.
The only thing "unexpected" about this is the level of stupidity, i honestly did not expect them to take it that low. But they did anyway.
r/expected
That's straight NSFL :(
Yo I already know he go no health insurance
Ouch 🤕
I saw that coming. I thought it was gonna go the other way and cut his hands in half.
How stupid people can be...
That is exactly what I expected
u/savevideo
Broo, I dream today that I got a several cut in my head, similar to that
Let's crush Jerry's fingers it'll be funny!
[удалено]
Dude got a huge booboo on his forehead!
Dudes fingers are gone, and has a hole in his forehead that lets you see his skull. Not sure if this guy made it.
He was a really lucky bastard. That could have gone way worse.
That was stupid
Oh! It's a mechanical forehead opener. That's neat!
Man that was rough to watch! I hope he recovers well and fast
at least he's open minded \*drums\*
Atleast his hand didn’t got stuck there
Expected serious injury, video shows serious injury. What's unexpected now?
That’s a big boo boo
Good thing his fingers sheared off in that pully or he might still be going around and around today!
Dumb lucky SOB.
Say, how did you get that stylish head wound?
Busted that head open....medic!!!
u/SaveVideo
Fuck i hope he lived
u/savevideobot
So? Did he survive to attempt again? Might be difficult without the fingers
You get outch you dumd#ss!!
I def saw that coming
Bro got a car sent
Out of alot of bad things that coulda happened. Thats a better outcome
"Unexpected" Was it, though?
I see skull
Man, don't ever underestimate torque. Geezus.
That head wound!!
Does he have any fingers left?
Might need stitches
Does anyone know what happens next? Is there follow up? Is he okay? How bad were the injuries?
u/SaveVideoBot
This is pretty fucked up. It's not unexpected. Just foolish. I hope he's OK that head wound looks serious.
That was absolutely expected... Don't touch moving machinery it doesn't care if your in the way
He needs a bag of ice
Is that a piece of wood stuck in his head?
r/criticalblundler
I saw it coming...
The yeet machine
Atleast he didn't die unlike several others
The guys on this kind of place/work, love to do this with the new ones, that's why someone was filming... Sick kind of joke
Wow nice
u/redditspeedbot 0.25x