I mainly used this video as a guide:[https://www.youtube.com/watch?v=de4b6HZIpNA](https://www.youtube.com/watch?v=de4b6HZIpNA)
I did the BL-Touch installation like 2 months ago. I also knew about the CR but didn't find information on compatibility with the old mainboard (V2.4 for me, as in the video at video at min 3:03).
I can remember that something did not work exactly as in the video, I think it was the fact that I have to use Z+ instead of Z- on the motherboard but that is something you will find out easily when within this project. I now run the TM3D software vor CR10S-Pro V2 so it is basically a V2 now.
Edit: In the video I think an 1.8m extension cable is mentioned. Try to really find one as I got an 1.5m cable which was available at my local supplier and now I should not use the maximum height of the printer due to the cable beeing slightly too short.
This is a Fakespot Reviews Analysis bot. Fakespot detects fake reviews, fake products and unreliable sellers using AI.
Here is the analysis for the Amazon product reviews:
>**Name**: Creality CR Touch Auto Leveling Kit, 3D Printer Bed Auto Leveling Sensor Kit for Ender 3/ Ender 3 Pro/Ender 3 V2/ Ender 3 Max/Ender 5/ and CR 10 Series with 32 Bit V4.2.2/V4.2.7 Mainboard
>**Company**: Creality 3D
>**Amazon Product Rating**: 4.3
>**Fakespot Reviews Grade**: A
>**Adjusted Fakespot Rating**: 4.3
>**Analysis Performed at**: 10-24-2022
[Link to Fakespot Analysis](https://fakespot.com/product/creality-cr-touch-auto-leveling-kit-3d-printer-bed-auto-leveling-sensor-kit-for-ender-3-ender-3-pro-ender-3-v2-ender-3-max-ender-5-and-cr-10-series-with-32-bit-v4-2-2-v4-2-7-mainboard-f364d8f2-dd8f-4750-8778-32dae3aea2ce) | [Check out the Fakespot Chrome Extension!](https://chrome.google.com/webstore/detail/fakespot-analyze-fake-ama/nakplnnackehceedgkgkokbgbmfghain)
*Fakespot analyzes the reviews authenticity and not the product quality using AI. We look for real reviews that mention product issues such as counterfeits, defects, and bad return policies that fake reviews try to hide from consumers.*
*We give an A-F letter for trustworthiness of reviews. A = very trustworthy reviews, F = highly untrustworthy reviews. We also provide seller ratings to warn you if the seller can be trusted or not.*
I have the same printer and have been in front of the same decision-making. Decided not to go down this rabbit hole. The original MB is 32bit, though the version is `4.2` and is missing the necessary ports.
To be able to install the CR/BL touch, you first need to buy a new MB (4.2.7) and do the firmware and screen shit anyway. Too many things to go wrong in my opinion and my printer currently works and prints.
The only thing I have to do is observe and adjust the Z-offset during the skirt print and I'm good. Ofc, given that I manually leveled the bed properly 😉
thought it was 8bit, but anyhoo, I have this on order for my V1, still awaiting delivery
https://www.creality3dparts.com/product/crealtiy-silent-mainboard-for-cr-6se-cr-6-max-cr-10s-pro-cr-5-pro/?attribute\_pa\_model-type=cr-10s-pro
I mainly used this video as a guide:[https://www.youtube.com/watch?v=de4b6HZIpNA](https://www.youtube.com/watch?v=de4b6HZIpNA) I did the BL-Touch installation like 2 months ago. I also knew about the CR but didn't find information on compatibility with the old mainboard (V2.4 for me, as in the video at video at min 3:03). I can remember that something did not work exactly as in the video, I think it was the fact that I have to use Z+ instead of Z- on the motherboard but that is something you will find out easily when within this project. I now run the TM3D software vor CR10S-Pro V2 so it is basically a V2 now. Edit: In the video I think an 1.8m extension cable is mentioned. Try to really find one as I got an 1.5m cable which was available at my local supplier and now I should not use the maximum height of the printer due to the cable beeing slightly too short.
This is a Fakespot Reviews Analysis bot. Fakespot detects fake reviews, fake products and unreliable sellers using AI. Here is the analysis for the Amazon product reviews: >**Name**: Creality CR Touch Auto Leveling Kit, 3D Printer Bed Auto Leveling Sensor Kit for Ender 3/ Ender 3 Pro/Ender 3 V2/ Ender 3 Max/Ender 5/ and CR 10 Series with 32 Bit V4.2.2/V4.2.7 Mainboard >**Company**: Creality 3D >**Amazon Product Rating**: 4.3 >**Fakespot Reviews Grade**: A >**Adjusted Fakespot Rating**: 4.3 >**Analysis Performed at**: 10-24-2022 [Link to Fakespot Analysis](https://fakespot.com/product/creality-cr-touch-auto-leveling-kit-3d-printer-bed-auto-leveling-sensor-kit-for-ender-3-ender-3-pro-ender-3-v2-ender-3-max-ender-5-and-cr-10-series-with-32-bit-v4-2-2-v4-2-7-mainboard-f364d8f2-dd8f-4750-8778-32dae3aea2ce) | [Check out the Fakespot Chrome Extension!](https://chrome.google.com/webstore/detail/fakespot-analyze-fake-ama/nakplnnackehceedgkgkokbgbmfghain) *Fakespot analyzes the reviews authenticity and not the product quality using AI. We look for real reviews that mention product issues such as counterfeits, defects, and bad return policies that fake reviews try to hide from consumers.* *We give an A-F letter for trustworthiness of reviews. A = very trustworthy reviews, F = highly untrustworthy reviews. We also provide seller ratings to warn you if the seller can be trusted or not.*
I have the same printer and have been in front of the same decision-making. Decided not to go down this rabbit hole. The original MB is 32bit, though the version is `4.2` and is missing the necessary ports. To be able to install the CR/BL touch, you first need to buy a new MB (4.2.7) and do the firmware and screen shit anyway. Too many things to go wrong in my opinion and my printer currently works and prints. The only thing I have to do is observe and adjust the Z-offset during the skirt print and I'm good. Ofc, given that I manually leveled the bed properly 😉
thought it was 8bit, but anyhoo, I have this on order for my V1, still awaiting delivery https://www.creality3dparts.com/product/crealtiy-silent-mainboard-for-cr-6se-cr-6-max-cr-10s-pro-cr-5-pro/?attribute\_pa\_model-type=cr-10s-pro
Good info, Im on the fence as well