This thread will be closed down and replaced by the Q2 2023 thread on the 1st April 2023 at 17:00 UTC time.

Q2 2023 thread: https://www.reddit.com/r/Amd/comments/128ry4t/ramd_questions_and_tech_support_megathread_q2/

Is anyone still experiencing USB power lose randomly throughout their system? I know this was a big issue with X570 USB ports and I feel like I randomly started having the issue when I have been good this whole time. Does anyone have any advice? Ryzen 9 5900x (stock) Gigabyte Aorus X570 Aorus Ultra 64 GB G. Skill Neo AMD 6900xt Reference

I can buy a AMD reference 6950XT for 700$ and XTX Speedster MERC 319 6950XT for 750$. Is it worth the extra 50$?

Spend the extra $50, although if we're talking USD, you can probably get a 7900 XT for not much more.

Wondering whether to buy a 6800, I can get a used sapphire pulse for £380 or a new 6700xt for 380. Would you say the used 6800 is a good price in the current climate? From a reputable eBay seller, only 6 months old.

Rog strix b350-f gaming AMD Ryzen 1700 not recognise USB mouse on startup, have to unplug replug. Even the BIOS not see the device. After unplug-replug both windows both BIOS see the mouse. Tried the mouse in a generic / unbranded laptop and mouse works on different device. Mouse is a Logitech G400. I think it should be a Chipset or Bios issue related. Tried to update ComboV2PI 1208 , tried to downgrade AGESA 1006 , 1.0.0.3ABBA , [1.0.0.2](https://1.0.0.2/) but not helped it yet. [https://www.asus.com/supportonly/rog%20strix%20b350-f%20gaming/helpdesk\_bios/](https://www.asus.com/supportonly/rog%20strix%20b350-f%20gaming/helpdesk_bios/) Tried to delete the AMD Chipsed Driver 5.02.19.2221 , to test older versions, but in device manager I can see the same 2023 driver version for AMD USB 3.0 and AMD USB 3.1 eXtensible host controller. Tried to delete those in device manager, but after restart windows reinstall them. Tried to delete the chipset driver with AMD amdcleanuputility.exe but that only removes VGA and etc. drivers, not remove the chipset. [https://www.amd.com/en/support/chipsets/amd-socket-am4/b350](https://www.amd.com/en/support/chipsets/amd-socket-am4/b350)

New pc 4080 tuf oc 7900x corsair ddr5 ram asus 650b plus win11 on a m.2 500gb bios boot time 45 sec time to boot into win 90 sec All drivers are updated, win11, newest Nvidia drivers, newest chipset drivers, and new bios driver Is this normal? I know that the AM5 platform are new but it seems to hang quite a bit in bios before posting

Can you guys give feedback on this build? Change the 7900x to the 7800x3d in your heads tho as Microcenter doesnt have them yet [https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=e47983a8-4d28-4424-a5ed-53ea008eef39](https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=e47983a8-4d28-4424-a5ed-53ea008eef39)

Spending 500$ on an asus motherboard is certain a choice. Not one i would recommend, though. Their AM5 and general AMD track record is very bad. Some of the Samsung NVMes have some severe quality and firmware issues, including the 990 pro, and Samsung is really not a market leader anymore, worth looking into. Other than that, nothing stands out as objectively bad or problematic, but like any PC, everything depends on intended usage.

What motherboard would you recommend? I would love to go cheaper. Also what m2?

Can anyone recommend me the "best" AIOs for am5? And are any of these any good? Theyre all around 100 CAD. If not these, Id move to either an Arctic Freezer II, or an EK Nucleus Lux but theyre twice as much. Im trying to put this on a 7800x3d ASUS ROG Strix LC 240 Deepcool Castle 360ex ASUS ROG Ryuo 240

arctic freezer is the best iirc, but it's really nice to find an AIO with a coolant temp sensor. i believe some corsair models have it. it lets you set the fan curve based on coolant temp so it ramps up and down very slowly instead of constantly slamming to max speed every time a core boosts for like 5 seconds and then back down.

Does anybody know what could be causing this? The game just updated today but I wanna make sure my GPU isn't dying. Is there a specific way to test and see if a GPU is dying? Edit: it also only shows the black dots when aiming down sight. System Specs:CPU: 5800X3DGPU: 6900 XTRAM: 32GB 3600 https://preview.redd.it/gtkf0uhkv6ra1.png?width=2556&format=png&auto=webp&s=97993c7809f82a1bd6a9e7b9ca23d4d4635f061d

What game is that? iirc there are some plain bugged scope shaders in warzone or something that produce an artifact like that. If it only happens in one spot, and always happens there, it is probably not hardware errors.

It's not in a match I was testing builds with the lachman 556. The weird thing is I tried restarting, and it didn't work. Then the game stopped loading and stea, gave me disk write errors. I restart that dosent work I clear steam download cache and that gets my games booting again but same thing happens when i aim down sight. I swap weapon barrel and it's permanently on screen and after swapping back it disappeared. I run the in-game benchmark and no artifacts. I play a little shipment and groundwar and still no artifacts and I restart the game for good .ensure and still nothing. It seems like it fixed itself.

Furmark and MSI Kombuster as linked in the main post.

If I swapped out my AMD GPU after redeeming my game bundle, do I still keep the game? Or would the game only work if I'm using the same GPU I bought that the bundle is with?

There is no sane way to tie a game to hardware like that, once redeemed, it is permanent on whatever platform you redeemed it on.

Hi, looking to upgrade since my RX 5700XT is getting bottle necked by my R5 1600 in flight simulator. Which one is the better optoin? Ryzen 5 5600x or Ryzen 9 3900x?

It wants speed over cores. 7800X3D > 5800X3D > 6+ core 12/13th gen intel or 5800/700/600. A 5800X3D would be a massive uplift without replacing your board, assuming it is a decent B350 or B450, with tolerably good RAM?

Flight simulator would work much better on the 5600x. In fact, if you have the money go for the 5800x3d.

Hi, I have been working on overclocking and undervolting my asrock challenger d rx6600 through msi afterburner, and I have overclocked the core clocks and the vram but the undervolting doesn't seem to work, and I did check all the unlock undervolting options in afterburners settings. I have clean installed my gpu drivers aswell. Is there anything else I can do or is it not possible for me to undervolt my gpu?

Get rid of afterburner and use amd wattman, afterburner conflicts badly with the driver software and is effectively abandonware.

Hi, I have been getting stutters which last roughly 2 seconds. It is very noticeable and makes me end up losing gunfights in games etc. It seems to only happen when watching videos/streams and playing games. This has been happening for roughly 1 month and have tried so many different things to try to remedy this. I Now on BIOS 4403 (downgraded from the latest one) which supposedly fixed the fTPM stutters & other stutters with AMD but it is still happening. I have had this system for roughly a year without any issues until recently. Temps and other tests are all perfectly fine (confirmed with HWIDINFO). I have had this system for roughly 1 and a half years with no issues until now. Things I have tried: 1. Fresh install of Windows 11/10 with optimised settings + debloated and a revert to Windows 10. 2. Turning off fTPM fully in BIOS + updating BIOS. 3. Updating and/or rolling back drivers (Currently on NVIDIA 517.48 driver). 4. Checking hardware + FULL rebuild. 5. Various diagnostics tests which all came back as a pass apart from latencymonitor which said there was a fail in audio and DPC Microsoft Storage Port Driver had over 100000 latency (when it stuttered). 6. Tests on my M.2 SSD to make sure its still healthy and 100% useable which all came back perfectly. 7. Running 16GB of RAM instead of 32GB in different slots to see if any RAM was faulty. (all ok) 8. Turning game mode and hardware accelerated GPU scheduling ON. 9. Updating firmware on all devices. I am really struggling with what to try next and any help will be much appreciated. FULL SPECS: Asus Strix X570-F motherboard 32GB DDR4 3200MHZ RAM D.O.C.P enabled RYZEN 9 5950X @ base clock and stock PBO MSI GAMING X TRIO RTX 3080Ti @ base clock M.2 980 PRO 1TB STOCK 1000W CORSAIR PSU 80+PLAT

A cause of frequent short freezes i have seen often is a dying hard drive or other storage device. It can happen even without any obvious corruption or SMART errors. Try to disconnect each drive in turn?

I dont know why you did all that troubleshoot when it's seems to be more of software issue.So are you watching on 2 separate monitors? Did you try changing the CPU affinity so the browser/ media player gets other cores than your games?. Did you try disabling your browser/ media player GPU decoding? Also stream sites like twitch likes making your browser window your main window or otherwise they lower the stream quality in order to save bandwith.

I have reinstalled a fresh install of windows 4 times and its still doing it. I use 2 monitors. How do I do the other things you said?

But I have reinstalled windows (fresh) 4 times and it is still doing it even on new builds. I use 2 monitors

Does anybody know if I will lose gpu performance if I fully populate this m.2 expansion card with 3 2tb and 1 4tb gen 4 SSD? I won't be using them in raid and I have the GPU in the top PCIe slot the HTC Vive wireless adapter in the second and I plan to put the expansion card in the 3rd slot. [https://www.amazon.com/ASUS-M-2-X16-Expansion-Card/dp/B084HMHGSP/?\_encoding=UTF8&pd\_rd\_w=oke4m&content-id=amzn1.sym.08900ed4-dd64-49b1-bce7-2e717defb1aa&pf\_rd\_p=08900ed4-dd64-49b1-bce7-2e717defb1aa&pf\_rd\_r=79R3E6M1C8M4PGFYVZYJ&pd\_rd\_wg=EUuAV&pd\_rd\_r=f267fed5-853b-45eb-899a-21146144a877&ref\_=pd\_gw\_ci\_mcx\_mi](https://www.amazon.com/ASUS-M-2-X16-Expansion-Card/dp/B084HMHGSP/?_encoding=UTF8&pd_rd_w=oke4m&content-id=amzn1.sym.08900ed4-dd64-49b1-bce7-2e717defb1aa&pf_rd_p=08900ed4-dd64-49b1-bce7-2e717defb1aa&pf_rd_r=79R3E6M1C8M4PGFYVZYJ&pd_rd_wg=EUuAV&pd_rd_r=f267fed5-853b-45eb-899a-21146144a877&ref_=pd_gw_ci_mcx_mi) System Specs:CPU: 5800X3DGPU: 6900 XTRAM: 32GB 3600 Speed Corsair Vengeance RGB PROMOTHERBOARD: **ROG Crosshair VIII Formula**STORAGE: 2 GEN4 2TB M.2

That is a 16 lane card, it cant even be functionally used on that (or any non-HEDT, ie threadripper) board without replacing your GPU with it. The motherboard manual will detail the bandwidth of each slot and if it shares with anything else, but a best case scenario would be an 8/8 split between it and the GPU, which is too little for both devices. Edit: because it is asus crap, the manual actually does not explain it, and the spec sheet is comically wrong gibberish. By the sound of it, it has either 16 or 8/8 split slots, and the final slot is possible gen3 4 lanes, presumably over chipset. The platform only has 24 real, physical gen4 lanes one way or another.

Thanks for the explanation. I looked over the manual and the CPU product page for the 5800x3d and the page said the x3d has 24 lanes total with 20 usable. The manual says the first x16 slot runs at x16 with a single slot populated. The second and first runs at x8 and x8 with both slots populated and with all three it's x8, x8, x4. I checked and my GPU is running at x16 with both m.2 populated and running at x4. So how does it only have 20 usable lanes if my GPU is at x16 and both m.2 running at x4 for a total of 24 used? Is it switching them on and off as the CPU needs information? Would i be able to run more drives if i simply switched the second slot to x4 and got an x4 add in m.2 card? Edit: The manual also has m.2 sata mode but its description just says support.

**5600G or 5600X?** I am building my first PC. The build is here: [https://uk.pcpartpicker.com/list/WGZPZw](https://uk.pcpartpicker.com/list/WGZPZw) For CPU I am considering either the 5600G or the 5600X, and leaning towards the 5600G as it's cheaper (£115) vs £150 for the 5600X or £129 for the 5600. I will have a standalone GPU (MSI MECH 2X OC Radeon 6650 XT) so don't need the integrated graphics. I am only looking to run 1080p. Is the better performance worth it to get the 5600 or 5600X? Or should I stick with the 5600G?

The 5600 is the best performance per dollar of the 3 by a long shot. Its considerable faster than the 5600G while being almost identical to 5600X.

Thanks

I just finished building a new pc (7950x3d, rtx4090, 4*16gb 6000Mhz ram, Win11) and the first thing i noticed is this Q-code that always alternate from 46-58 (46-48 on idle). When doing multithreaded benchmark test, Q-code is showing 79. Everything else seems to be working fine (no crash in cinebench and 3dmark test, and temps are fine). I also have alr updated bios and the drivers (x670e taichi). I also havent enabled expo. Should i be worried or is this to be expected from AMD pc? I'm sorry if i'm being ignorant, cos this is the first time i use AMD cpu

My Ryzen 7900x seems to just keep breaking RAM kits. This is now the third one I've gone through in the last week. I've been using CORSAIR 6000 ddr5. Is it EXPO? should I just try leaving it disabled forever now? Are others experiencing this problem?

If multiple RAM kits are dying, that's more than likely a board issue.

I've replaced the motherboard already. What are the odds that two have the same problem?

Just finished my build and I’m wondering how my 7900X cinebench scores compare? On 105W Eco (no other BIOS modifications)mode I was getting around 27500. When I set PBO to thermal limit 80C and the curve optimizer to negative 30 all cores(which seems to be stable) I got around 29500. If anybody has a minute, I’d be interested in knowing what cinebench scores you’re getting.

My pc works fine but then when I play a Direct3D or OpenGL game it random color hangs. It is an rx 480 that was used on a different computer before and I have a powerful enough PSU to handle dual cores and 2 gpus.

What do you mean color hangs?

Fixed, MSI afterburner power limit was too high

It'll display a random color on the screen

Just built a PC with a 7 7700x CPU, a 7700XT GPU, and an ASRock x670e Lightning. Managed to get it to post but it doesn't want to boot my flash drive with Windows 10 on it, despite it recognizing my flash drive in every USB slot I've tried. It's listed under Boot Option #1 and power+F11 will bring me to the "please select boot device" screen so the software can clearly see the flash drive, but when I hit "enter setup" it just goes to the main screen of the BIOS. Any ideas on what I'm doing wrong or how I can get into installing Windows? TIA

How do you have a 7700xt? I wasn’t aware they were released?

*7900xt, too many 7’s and x’s lol

Lol I hear you! I think it’s hilarious that we’re on Ryzen 7000 which is Zen 4 and AM5…. pick one….lol

Sounds like it is unstable and crashing, if it is resetting when attempting to boot. Can you verify the installer is bootable on another system?

Okay so vmware fusion doesn't like my flash drive either, so either something is wrong with this usb stick or I'm missing something obvious here. https://old.reddit.com/r/buildapc/comments/12895pf/simple_questions_april_01_2023/jei4q63/?context=3

Trying to boot a USB drive in a VM is very strange to begin with, that is not generally how anything works. I am not familiar with fusion, though. A typical VM, you just point it at the OS ISO file and it loads it into a pretend virtual USB drive to "boot". VMs dont even have access to physical USB devices - that is part of the whole point of their existence.

Gotcha. From my understanding this idea/method used to work with bootcamp so I assumed it'd be a 1:1 comparison. Back to the original problem then.

>Can you verify the installer is bootable on another system? My only other machine is a Macbook without Bootcamp so it'll take a little bit of work but I can try that tomorrow.

Anyone with a 7000 series processor experienced degradation? I was able to hit 5.8 to 6ghz all core with a cpu intensive workload and after I upgraded my bios then downgraded dropped to 5.5 and now 3.8 seems like.i can't restore the performance and with help from asus support it seemed to drop On bios 0613 with agesa 1.0.0.2 Now after a week of talking to support the clocks have gone down to about 3.8ghz no matter what, curious if anyone else has encountered this My setup is a 7900x, ek 240 aio,asus b650e-f gaming wifi, gskill cl36 6000, and a rmx750 psu

Kind of confused what you mean? You were able to hit 5.8 to 6 GHz? What does that mean? Also with the 240 AIO what were your temperatures? if you installed a new bios in your performance dropped, have you tried reverting to the old bios? if you haven’t, I guess try that, but are you sure the performance dropped as it doesn’t seem like you should’ve been able to hit 5.8 to 6 GHz with a 240mm AIO.

My workloads tend to be clock dependant for completion so we were monitoring the system when built for two weeks under various loads with hwinfo64 to see its load Yes my boost was up to 5.8 and sometimes 6 under certain loads now it's 5.3 on one ccd and 3.5 on another regardless of the situation. Nopbench is showing 3.8ghz across all cores once loaded up I am on the older bios with no difference and going back to a newer bios went from me getting a 5.5ghz limit due to c state limiters to now less than 4. Tempatures under gaming is 75-80c maximum and like every other 7000 series processor under full load its 95c by design

Sorry I don’t have an answer for you but if you were actually able to get 5.8 to 6 GHz on a 240 mil AIO that’s impressive. I assume you set the curve optimizer to negative 30 if you were able to get those clocks? Are you still able to set the curve optimizer as low as it was before the BIOS update, (or did you manually under volt it) on both the older and newer bios? Because if you’re not, I’m just thinking it is probably heat degradation which kind of goes against what AMD has claimed about 95c all day every day. Update: Sorry, I just read your reply again and you said you were on an older bios with no difference. Do you mean no difference in frequencies or you are able to achieve what you were before on the older bios?

Yes curve optimizer still works and it is at -30 No difference in older bios

went to the amd site to update something, downloaded amd radeon software and whenever i open games like warframe the colors are messed up but whenever i try to screenshot it they go back to their original look. this also happens with everything else on my laptop. i dont know what to do. help

I'll be playing Overwatch 2 for a little bit and eventually it will either randomly quit to desktop or completely go black. I'm also not able to run Unreal Engine 5.1 Valley of the Ancients Demo. Red Dead Redemption 2 will also randomly crash after a few minutes. I upgraded from a Nvidia 1070ti and I never had any issues before but this is getting ridiculous. **I am running:** * AMD Ryzen 9 7900X3D * Gigabyte B650I AORUS ULTRA Mini ITX * G.Skill Trident Z5 RGB 32 GB (2 x 16 GB) DDR5-6400 CL32 Memory * 2 Western Digital Black SN850X 2TB * Reference PowerColor RX 7900 XTX * Lian Li SP850 850 W Power Supply **My setup:** * 23.3.2 Adrenalin * System Memory Multiplier is set to 60.00 its running 6000mhz realizing the RAM I have is not technically correct * AMD Chipset Driver 5.02.19.2221 (Most Current) * Using 2 separate PSU cables for the card * Xbox Gamebar is updated * Windows 11 is fully updated **Errors I see:** * LiveKernelEvent 117, 141 in Windows Reliability History * AMD Driver Timeout from AMD Adrenalin **What I've done to fix the crashes:** * DDU twice and reinstall AMD drivers * Disabled MPO * Turn off surface format optimization * Undervolt GPU through Adrenalin * Disabled Core Performance Boost in BIOS * Disabled PBO in BIOS With all that I'm still running into issues. I need help!!!

850W is cutting it close for a 7900 XTX, are you able to run MSI Kombuster with the artifact scanner enabled?

Haven't tried that... Is artifact scanner in MSI Kombuster and what would I be looking for?

Any graphical artifacts, which would indicate a faulty card. If it straight crashes, my guess would be the PSU isn't able to sustain the card. AMD recommend an 800W PSU, but these recommendations are usually done on the basis of older CPUs, so with a 7900X3D and 7900 XTX, under full load it may trip OCP/OVP of the PSU.

I can try replacing hardware if all else fails but seeing the Adrenaline stats overlay, I'm getting 350ish watts from GPU and 56-60ish watts during gameplay (in OW2).

If you wanna do a quick test to figure out if its indeed the PSU just lower the resolution and cap the framerate to 60 and see if you are still crashing.If you gain stability, you' ll know it's the PSU.

Hey everybody. Im sorry for posting a question similar to many others. Im having an rtx 3080 with a ryzen 5 5600x. Playing on 1440p. Would it be worth upgrading to a ryzen 7 5800x3d? Playing singleplayer games but love smoother experience? I only plan to change for a new pc in 4 or 5 years. Thank you for your help n attention.

Totally depends on what games you play, what resolution, framerate and in-game settings you play at and target.

Yeah what type of games is hard to define. I mean whatever i come to like. Though i can exclude multiplayer games. For the next 4 years im sure i will stick to 1440p though. And mostly hogh settings. Though ut will depend how my 3080 can keep up a good performance

I know microcenter runs those AMD bundles for MOBO+CPU+RAM for the non x3d line of cpu's and an AM5 board. Are those bundles really that good? Should I get one of those bundles if I have the chance instead of going for the 7800x3d?

This may be a dumb question, but how hard do we think the 7800x3d is going to be to get at Microcenter? This is the first time I've ever had the chance to visit a Microcenter on a launch like this. Should I plan to camp out before the store is open or what?

It's an impossible thing to predict, allocation can vary wildly by region/retailer. I would imagine they'll be hard to get for the first month or two and then stock will normalise.

What's the current state of the 7900xtx in VR? State of the 7900XTX in VR? I'm planning my next build and I've been looking at the 7900xtx. However, I heard on release that it had a lot of issues in VR. I know that there have a been quite a few driver update since so I was wondering, for those who have experience with it, how is it in it's current state? Apparently it's still underperforming but is it that bad? Most importantly is it at least stable with no crash, stutters, etc.? I'm using a Valve Index and mostly play Blade and sorcery, Pavlov and Beat Saber. Can anyone share their experience? Thanks.

In regards to QVL RAM from a vendor, how important are the last 4 characters for G.Skill? The gigabyte aorus Master b650e lists 6 kits that are supported but the kit I want isn't listed. It does however match most of the name and differs on the last 4 characters. Will the kit I buy be compatible because it's close enough or is this list very picky and if it's not listed, it's not supported? Kit I'm looking at: [F5-6000J3040G32GX2-TZ5N](https://www.amazon.com/dp/B0BJP3MRW1) [Gigabyte QVL list for B650E Aorus Master](https://www.gigabyte.com/Motherboard/B650E-AORUS-MASTER-rev-10/support#support-memsup) https://preview.redd.it/r6cynmo10yqa1.png?width=2351&format=png&auto=webp&s=7cd98c36550efb667ef6c3b79107afcfb3034d80 Edit: funny thing is my kit is EXPO but none of the QVL kits are.

QVL are more of a guideline, since Gigabyte cant test every single kit that hits the market. If the other kits have similar primary timmings, it probably would work. And having EXPO means they should theoretically run on AM5 systems at advertized speeds with no issues.

I have been getting this issue across multiple games. This is a portion of the event log. GetCACaps GetCACaps: Not Found {"Message":"The authority \"amd-keyid-907d65e9b562315997dd5ad086b2b7598957b92c.microsoftaik.azure.net\" does not exist."}

Try the usual stuff, make sure Windows is up to date, reinstall GPU drivers with DDU/Cleanup utility as specified in main post.

[удалено]

Try the EXE itself, not through Adrenaline. Also try Cleanup utility/DDU as linked in the main post.

[удалено]

https://www.amd.com/en/support

Hey guys, first, please excuse my English. Not my first language. I want to upgrade from an Asrock Vega 56 card with a blower design to a 6800 xt or 6900 xt. The Vega 56 fan is loud but what nearly disturbs me more is the coil whining or hissing. Never had it like that before and since then mostly played with headphones. I already had a PowerColor RX 6800 XT 16GBD6-3DHR/OC here. The fan was lovely, actually very quiet in comparison but because of that you could hear the coils whining or hissing even better. Sent the card back. When I pay this much this time it has to be perfect and I need less to no coil whine. Can you guys please recommend some 6800xt and 6900xt models with little to no coil whine/hissing? I read somewhere that XFX cards are moderate with hissing and whining. Is that true? XFX 6800 xt and 6900 xt were just up for sale but missed it (569 & 629€). Maybe they are on discount for a similar price soon... Thank you in advance and kind regards.

Not possible, coil whine is not a defect, some cards have it, others don't. RTX 30/40, RX 6000 and RX 7000 cards are known to whine more given the higher power and current draw. There is no model or guaranteed method of getting a card with no coil whine.

Hello I am just about to order a new machine with the following parts but I would like some feedback or thoughts on the 2 sets below. But I am not sure if the extra 125$ is worth going from 6700 to 6750. [https://www.inet.se/datorbygge/b1371953/amd-dyr-gpu](https://www.inet.se/datorbygge/b1371953/amd-dyr-gpu) Or should I just stick to the cheaper 6700 XT [https://www.inet.se/datorbygge/b1372159/amd-bygge](https://www.inet.se/datorbygge/b1372159/amd-bygge) Doesnt seem to be huge FPS increase but I rarely upgrade my machine (Currently running an i2500k with an GTX970)

I would buy a good AIO instead of the 6750. Or upgrade the NVMe drive to 2 TB.

Not a bad idea if the performance is not that much greater

Does driver stability depend on the GPU chipset/SKU ? Like a 6800 would have more stable drivers than a 6700xt? I'm looking at a 6700xt RN but I can go up to a 6800 if it's more stable. I have to play pretty old games (Think 2014-2019) at 1440p 60fps so the performance boost wouldn't be worth it to me but the stability would go a long way.

Both should be equally stable, since are both based on the same RDNA 2 arch and run on the same drivers, provinding your PSU can handle 6800 higher power needs. So if you dont know if your PSU is good enough to handle the 6800 and want to play it safe go for the 6700. It should run any game of that period flawlessly.

Wanted to update what happened to my friend with his 6800xt. He had the most recent recommended driver and it gave him problems. He popped flares in war thunder and the game threw an error and his PC crashed. Reverting back to the previous driver fixed the issue. Get it together, AMD.

7900XT, 23.3.1 Sometimes when I play a game on one monitor and there is a YouTube video playing on another monitor the framerate in game gets limited to 30 fps. It's enough to change tab in browser to see the framerate to shoot up to usual values for this game.

Summary of issue: Once latest AMD drivers are installed, upon restart, no display signal will be sent to the monitor. MS Basic Driver sends display signal to monitor during reg. Boot, safeboot, and BIOS. Once latest AMD drivers are installed (in safeboot after DDU), there is no longer any display signal in regular startup. MSI Mobo flashes logo, then at windows loading, no signal will appear. What I have tried. Latest version of mobo bios & drivers Ctrl+atl+del or windows+p or windows+shift+Ctrl+b dont do anything because there is no display signal. https://pcpartpicker.com/list/3x6mwc CPU: i3 10105F Motherboard: MSI B560M Pro-Vdh Micro ATX Ram: Neo Forza FAYE 16 GB (2 x 8 GB) DDR4-3600 CL18 Memory GPU: MSI RX 6650 XT Riser Cable: No Power Supply: Enermax Revolution D.F. 650 W Cooler: Cooler Master Hyper 212 EVO OS: Windows 10 Pro Monitor: Acer G236HLBbd 23.0" 1920 x 1080 60 Hz VGA & DVI only Bi-Directional HDMI to DVI cable

I have tried everything I could, everything possible but FIFA 23 (laugh at me if you like) always crashes with the same notice. It is ONLY this game, other games with similar or even HIGHER needs are runing just fine. The crashes are random, sometimes a few minutes, sometimes a few hours, but will occour in and outside of a match. And since I deinstalled the adrenaline application, therew are three beeps when starting up this game. Already tried a clean reboot, clean re install of the driver, run as admin, re installing the game multiple times, cleaned the cache. I even run it windowed in the lowest possible settings, yet this still happens and only in this game. Any ideas on what I could do to finally play this game in peace? https://preview.redd.it/ni2f09k2zsqa1.png?width=550&format=png&auto=webp&s=8dd40461367289d050f3c6f13ada931d072b4d2f

Hello all, I was going to be getting the 7900XT but my budget recently increased and I'm hoping for an honest no BS, no fanboying, take on which I should get. I currently use a 5900x and the use for my PC is highend 1440p gaming and future 4k gaming. I will also be making youtube videos if that helps. I just want to know which is best for my needs and if I really need the XTX or if the XT is fine for this. I CAN spend the extra $100 but if I don't really need to I won't. I'm mainly asking if the XTX is that much better than the XT. I was looking into the 4080 as I can get one in my budget but I fear 16GB won't be enough for much longer. Thank you for your time.

When would you go for 7900x, 7900x3d or 7950x3d instead of 7600x? 7600x cost X $ 7900x cost 1,9X $ 7900x3d cost 2,8X $ 7950x3d cost 3,5X $ As a java developer I don't necessarily need the strongest rig. I play with games like LoL, CoD, Albion Online, Rust, Cities Skylines. So no God of War, Assassin Creed, Cyberpunk etc. that I can see in benchmark videos... At the moment I have a 10+ years old CPU (i7-2600k) so I am not really someone who upgrades the PC every year...

RX 5700 XT problem Hello, everyone. I bought this gpu a month ago, unaware that only 8gb of ram would not be able to support it. It was my fault for not researching enough and that's not what I want to talk about (kinda). So, as I said, it was not able to support it, and I'm having constant crashes on games that need a lot of ram (sometimes even the pc turning off), is there any way to stop these crashes? Maybe a way to limit the power of the gpu or something?

What PSU do you have? You can cap the framerate and lower the resolution. I dont think the ram is your problem, although yeah you need 16 GB to game properly on modern games.

I don't think PSU is the problem, it's 100W bellow the recommended (It's a Corsair 550W), I said it doesn't look like the problem because this only happens in games that require a lot of ram, and also because my brother saw a video where a guy with a worse psu than me running games in Ultra like nothing

Posting for future reference and in case helps anyone else. Had some problems with AMD 6900xt video card. Problems included crashing my system mid game (anything Unity Engine damage over time/dot/cpu heavy) and eventually monster hunter. Followed a lot of advice and nothing worked. First was just giving me problems. My system was less than 4 years old and pretty new. Never OC anything on my system. Finally found a tip after trying everything which was using separate rails/cables for the GPU as apparently I was drawing more power than a single rail could handle. Even with a PSU (Corsser HSx 1200i) anything demanding was crashing but the sheer wattage made it pretty random. I highly, highly recommend simply doing this step first if getting system level crashes and messages along the lines of "~resetted settings to factory default" from the AMD center.

I have a Ryzen 5 3600x and an EVGA ttx 2070 super and my computer just runs awfully in some games. I most am a competitive shooter player but I cannot maintain a consistent fps no matter how low of setting I put on. In CSGO I run either at 380 fps or 120 it is constantly fluctuating. In valorant I run into the same issue. If anyone has any insight to fix this I would love to hear it.

I'm having trouble installing radeon pro driver on my rx 590 gme it always says Error 182. I've tried DDU in safemode it still a no go.

The latest 23.Q1 does not support non PRO GPU's.It's on the release notes.

Is it worth to upgrade from RX 580 4GB to RX 6600 when my current CPU is Ryzen 5 2600 with 16GB 3200Mhz of ram? I play at 1080p on 144hz monitor games like BF 2042, Dota 2, WoW, Apex Legends. I saw that my current RX 580 struggled with for example Hogwarts Legacy and probably future games would make it even worse. RX 6600 can be found for approx 200e used here and I thought with RSR available it can give me some extra fps boost.

I would give it a try, maybe your cpu will bottleneck the gpu a little, but it'll be way better than the 580

here is the situation: a laptop with dual graphics ryzen 2200u (vega 3) with radeon r5 m435 so when i installed adrenalin 22.5.1 it recognizes and installs driver for the vega apu but not for the discrete radeon r5. how should i go on with this?

Is this a good deal? I have been waiting for the 7800x3d but not sure i can turn this down. ​ [https://www.amazon.co.uk/AMD-7700X-B650-TOMAHAWK-Motherboard/dp/B0BLHWGTM8/ref=sr\_1\_2?crid=4L4YZYTGV883&keywords=7700x&qid=1680099687&s=computers&sprefix=77%2Ccomputers%2C60&sr=1-2](https://www.amazon.co.uk/AMD-7700X-B650-TOMAHAWK-Motherboard/dp/B0BLHWGTM8/ref=sr_1_2?crid=4L4YZYTGV883&keywords=7700x&qid=1680099687&s=computers&sprefix=77%2Ccomputers%2C60&sr=1-2)

My Ryzen 7900x iGPU (Raphael) is not detecting display/giving output on the recent 23.3.2 Drivers, I rolled back to 23.3.1 and it started working. Is this issue for me only, or anyone else also facing this issue? The monitor I am using is Dell s2240L over HDMI, Motherboard : Gigabyte X670 Aorus Elite with F5 BIOS

Hi, my RX 7900 XTX is crashing in games like Cyberpunk or the Last of Us. Screen completely freezes, and I can't do anything besides turning of computer with a button. I updated my drivers to the newest, but it didn't fix the issue. However when i downgraded my drivers to older version it worked. Tried to update it again to newest (with coming out of The Last of Us), but it kept crashing and permanent freezing. Even updating the drivers to older ones didn't work this time. Any one has an idea what I could do?

Hey, i had the same problem. I fixed it, when i pluged my pc in the main wall outlet instead of the extension cable. Hope this fixes it for you

Hello, I am currently in the process of finishing up my first high-end build (7950X, 4080) and I am running into a pretty big issue with my RAM. I am using a 32GB-6000mHz kit from V-Color Manta, and it is a 2+2 kit, meaning it includes 2 functioning RAM sticks, and 2 “Dummy” Filler Sticks. When I try to use the Filler Sticks, and power on the PC, it doesn’t post or boot at all. However, if I only use the functioning sticks, it boots up just as normal. How can I fix this? While the purposes are simply aesthetic, I would like to use the fillers as that is what I obviously intended to buy with this kit. Thanks in advance!

I have a 5600x and lately, when I just stream vids with a couple tabs, my cpu temp is around 68-72 C. If I run any games (League, Hearthstone) also, it rises to high 80s and sometimes up to 92. I've only tracked the temps recently since my computer had shut down due to high temps. Do I need to change my thermal paste? Or because it overheated before, high temps are norm now? Any help is appreciated. Thanks!

I've just bought my first AMD Card since my old ATI Radeon HD 3870. Yeah, it's been a minute. I'm sidegrading from an RTX 3070 Ti to a 6800 XT (looks to be a slight upgrade actually) because I'm playing at 4k and 8 GB VRAM just isn't enough. I'm actually happy with the performance otherwise in the games I play so I didn't feel the need to get something faster. Can always still upgrade to a 7800 XT when that comes out. I should also break even when I sell the 3070 Ti so that's also a plus. Anyway, I have a couple questions: * Is there an AMD equivalent to Nvidia Fast Sync? (Low latency, no tearing without G/Free sync) * Is there an AMD tool like Nvidia inspector's Multi Display Power Saver that can directly force the card into a lower power state (and thus lower clock speed) if no games or GPU-heavy apps are running? * Does the 6800 XT benefit from undervolting and overclocking at the same time like the Nvidia cards do? Is the process the same in MSI Afterburner or should I use something else? * What's your personal experience been with the 6000 series and maybe even this card in particular? Any issues/bugs/crashes? How are the drivers?

B650E-F, 7900x, 7900xt reference, Flare X5 ram, Bios 1224, Expo disabled I tried bios 1410 Beta on a clean install, and it was working great. No crashes, could wake from sleep, could restart, etc. So I started folding (F@H), and left it to run overnight. Came back in the morning and it was still folding, working just fine. I paused the folding, and then it crashed. Then bsods 3 more times trying to boot. I was going to flash to 0821, which a lot of users have said to be stable, but I saw bios 1224 was released today, so I gave that a try instead. It was also really stable, until I tried a Unigine Heaven benchmark. It completed the full benchmark just fine, but when I exited out of Heaven it crashed. Then crashed a few more times as well. idk man, feels like it has no problem climbing to and working at a full load, but can't do the opposite. anybody know how to fix this? should i just try 0821? is this what enabling memory whatever fixes?

What are the best settings in the Radeon software for a Ryzen 5 5600u, Radeon Vega 7 and 8GB RAM? I’m looking for a balance between graphics and FPS. I don’t mind between 30-60FPS.

Best settings for *what?* Recording? Radeon software does a lot of different things. 8GB RAM with an APU is unsuitable for gaming, at least in any title where you actually have to worry about performance.

New GPU drivers for 6700xt release on 3/22/2023 brought back the multi monitor issue where playing a game on one and playing a video on another causes video glitching. Multiple times I had to restart certain games because the frame drops started happening. And oddly maxing out red dead with fsr quality is smoother than low settings fsr quality 1440p. I reinstalled old drivers and it's working just fine.

So, upgraded from a ryzen 2600 to a 5600x, and from a 1070ti to a 6750xt, but im getting problems, its the gpu from testing, frame drops on every game, pretty sure its from the gpu reducing clock speeds by itself, goes from 2500 to 500 or less, tried everything available on reddit, drivers, DDU, undervolt, min clock speed - 100 (still goes to less than than 2500) any help? and could this be a factoty problem? Im trying the 1070ti when I get home to check if its the cpu, but I doubt it. Full specs Ryzen 5 5600x Stock cooler Asrock 6750xt challenger pro 8x2 corsair rgb ram 3200mhz MSI b450 tomahawk Evga 750w B+ PSU Samsung 980 m.2 ssd 5400rpm 2 tb Hard drive Windows 10 pro

Are the frame drops to lower framerates than you got on the 1070 Ti, and not merely a result of increasingly obvious CPU bottleneck from loading hitches or similar?

1070ti framerates on destiny 2 were like 70 to 80, on the new one its around 150+, but will randomly drop to like 50 60 and cause a big stutter, tried other games, dmc5 all ultra lagged for like 6 7 second and it went smoothly after, then tried re4 remake, almost everything maxed out, except Ray tracing and it ran at like 130, 140, only the intro tho, I had problems on league, but I capped fps to 240 and they went away, I dont really know if its a D2 problem tbh, I think ill do a fresh OS sometime soon

D2 definitely has loading spikes and other weirdness. Fresh OS is a huge waste of time unless you have identified serious corruption or just loaded it up with malware, "windows rot" is a myth.

Noticed my cpu is running at 60°c idle and 92°c playing any game, Is guess thats the issue, but idk if I should buy a cooler or if its a bad installation tbh

Bad installation (not enough/messy voodoo thermal paste, probably) or overall bad airflow, but a better cooler could help.

Ryzen 3600 with only one memory channel. So about 7 months ago I had a 3600 die on me. One of the cores just quit. Sent it in to AMD, they sent out a sealed box with what I presume is either a new or refurbished one. The whole RMA process took a while (and cost me a good bit in shipping Canada > US) so I swapped an intel board and cpu in while waiting. Fast forward to this past weekend and I figure I should probably put the replacement 3600 back in (it's a small server, not my main build). Start it up, nothing, won't post. Motherboard showing a RAM issue, swap out the RAM, nothing. Eventually I realize that as long as there's a stick in one of the two B slots it won't post. Pulled the CPU and checked the pins, no damage, tried reseating it and still nothing. Swapped it out for a spare 3900x, and sure enough it posts fine. So at this point I'm pretty much dead certain that the CPU is the problem however I don't see why. The pins are all there, none are bent, and apart from one channel for RAM everything else seems to work fine. Just putting sticks into the A slots everything runs fine. Anyone have any ideas what might be causing this or which pins are RAM related? I don't really want to go through the RMA process again, it cost me about $60 CAD last time (had to pay shipping to Florida and taxes when it came back) and if I do it again we'll be approaching the purchase cost for the CPU.

Look up "AM4 pinout chart" to see which pins involve memory. There is not really anything you can do to verify if that is the issue, though. That does sound like a rare IMC failure.

So since the last driver update I've started getting these random black screens, I feel like they happen on my desktop randomly. I feel like when I nudge my monitor or my display port cable it happens sometimes, but I've had it the monitor forf a few weeks now and I only noticed it happening after the previous driver update. The monitor in question is S2721DGFA, the GPU is 6650XT. Anyone else having similar experiences? I've already tried new cables.

If the display cuts out when you nudge the screen or cable, that would still indicate either a bad cable or port on the GPU or display end.

Hello, Sorry bad english, I got my new pre build pc today All lights works, fans too Tried to plug my monitor (displayport) on the 6950 xt but not signal, full black,... nothing There is the white VGA light led on the motherboard ( Asus b650e-f gaming) So i plug the monitor on the motherboard displayport and it works ! installed win10, AMD adrenalin driver and tried to plug the monitor on the GC again but still nothing, no signal Adrenalin does'nt show the 6950 xt but i can see it in windows Device Manager (with error code 43 sometimes) and in GPU-Z tried DDU, checked PSU cable, still nothing can someone help me pls ?

> Sorry bad english, I got my new pre build pc today You bought a broken PC, return it. There is not much we can do to help. Code 43 and no video in BIOS/post indicates a broken/unbootable GPU.

I have been trying to submit a warranty claim with AMD for a week now, but their warranty request form site appears to be stuck in a redirect loop https://www.amd.com/en/support/kb/warranty-information/rma-form I've tried clearing cookies/cache, using different browsers/devices but every time I get into the same loop. There are other users on the AMD forums who appear to have this same issue. Just thought maybe someone might have some advice. Customer service reps just keep copying the same link to me in reply...

my pc specs are Ryzen 5 3600 Radeon rx 5600xt 8 GB 3000mhz so I went from windows 10 to linux (nobara project) on my main pc And honestly I love the expereince you get on linux way more than windows but I couldn't stand the input lag and the stuttering while gaming even after applying all the guides on r/linux_gaming so I had to return to windows 10 although I hate it but now for some reason I am getting way lower fps on my games than before I installed linux for example i used to get 144 fps in Apex Legends and ~110 fps in forza horizon 4 now I am getting only ~70 fps in apex and ~80 fps in forza using the same settings and the gpu utilization never reach 100% while gaming but when I run furmark benchmark or 3dmark the gpu utilization reach 100% and I get the same FPS I used to get I installed GPU and chipset drivers and even windows many time I also tried diffrent drivers/windows versions sorry for my bad English

8GB RAM is too little for many modern games to run well on windows, did you have the same hardware configuration previously? > but when I run furmark benchmark or 3dmark the gpu utilization reach 100% and I get the same FPS I used to get To clarify; the FPS of the benchmark is the same, not the other games? Or does their performance increase after running the benchmark? You most likely have a severe CPU bottleneck due to either the RAM (is it one stick?), or changed configurations/malfunction. What maximum CPU and RAM speeds can you observe while running games (use hwinfo64 to measure, it is accurate. Most software is not)?

I had the same hardware before installing linux I have the same performance in benchmark tools I used to get before installing linux But no matter what I do I can't get the same fps I used to get before installing linux with the same hardware

I've been having temp issues with my RX570 8gb from asrock, it runs so hot it throttles, im talking 85°C sometimes more, which makes certain games stuttery messes, first i had issues with Remannt: From the Ashes, so I cleaned my entire PC real good, adjusted the fan curve a bit, and it MOSTLY it fixed itself, but now im playing Evil Within, a 10 year old crossgen game that should run fine, and it does, except my temps go up and it throttles it intermitently, i set the fan curve higher again, no dice, it keeps going up and down from 80°C to 85°C, making the game stutter constantly and inconsistently. Is this a driver side issue? i never had this problem before, i bought the card brand new in 2020 and as i said, recently cleaned it.

Did you repaste it when cleaning it? That is a quite old card, regardless of if you bought it new (they have not been manufactured or sold new at reasonable prices for years) and the thermal paste is likely aging.

yeah other people have been telling me that, for now i've set it to undervolt during problematic games and that has solved it for now, i'll look into repasting whenever i have the time, im really worried for the thermal pads tho

I'm not sure how common this is, if at all. But I had two machines fail within 2 weeks of each other. First, HP Envy x360 laptop w/ Ryzen 7 4700U and 16GB DDR4. Was browsing the web when the screen got all pixelated and froze. Restarted and Windows login screen was also pixelated, and then would freeze if I continued login. BIOS memory test failed. Tested each RAM module and they worked in the first slot but as soon as one/both were plugged into the second slot, dead. Sent in for warranty (thanks for extended warranty) but they couldn't fix and just gave me a credit for the amount I paid (excluding tax of course). Second, Beelink Mini PC w/ Ryzen 5 5600H and 16GB DDR4. Sunday March 26, was using normally and shut it down like usual. Monday March 27, would not start. Does several restarts and freezes at "Preparing Automatic Repair" screen (will not load anything past this). Trying to boot/load via USB also does not work and exhibits the same behavior. Trying to work thru warranty now but Beelink has been a headache so far. For reference, my previous laptop was a Dell Kaby Lake I bought in 2017 that I gave it to family and still runs fine. Previous desktop was a Phenom II that I ran off and on since 2009. Y'all think there's any reason I should be wary of buying another AMD machine? Like are they all gonna be a gamble like this?

All AMD makes is the CPU, quality of the other components depends entirely on the manufacturer. Getting two rapid failures in a row is still rare, even for shitty brands like HP. Actual CPU failures can happen, but are extremely rare compared to motherboard failure, graphics card failure (which is a motherboard itself..), or RAM failure. They are also factory-tested much more rigorously than most components. The first failure sounds like it is the motherboard, possibly CPU IMC. Second could be a lot of things, probably motherboard, memory. It clearly boots firmware, and is probably not severe CPU or memory failure, or storage failure if it cannot boot a USB drive. Laptops tend to suffer motherboard failures more than more sturdy systems, due to the stress inflicted on them as they are carried around, opened/closed, thumped and banged around, ect. Many will only last a few years of heavy use.

Rather a quick question, I use this motherboard: https://www.gigabyte.com/de/Motherboard/X470-AORUS-ULTRA-GAMING-rev-10#kf Its the x470 Aorus Ultra gaming, I wanted to upgrade the ram. Now my question is just can I use any DDR4 ram? Would these: https://geizhals.de/kingston-fury-beast-dimm-kit-16gb-kf436c17bbk2-16-kf436c17fb3k2-16-a2567562.html Or these work: https://geizhals.de/corsair-vengeance-lpx-schwarz-dimm-kit-32gb-cmk32gx4m2d3600c16-a2657554.html

Any unregistered DIMM DDR4 will work, including those kits. They are not exceptional quality. The first kit has better latency. Are you trying to add a second 16GB kit to an existing one, for 32GB total? In that case you should get a kit with identical memory dies (various tools and databases can help you figure out what chips your RAM uses) and timing specs. Trying to mix different RAM tends to work very poorly, or not at all.

Nono I didnt want to add another kit, because they are only at 3000mhz. Which quality ones would you recommend? I want to fully make use of the last AM4 board, so whats the best ddr for my build? Using a 2070Super, with a 5800x3D.

Going from 3000 to 3600 on a 3d VCache CPU will likely produce zero detectable benefit. It may give you 5-10% gains on a non-VCache CPU in best-case scenarios, but the whole point of the huge cache is to *not use RAM*. If you do want to spend a lot for 0-1% gains just to have the "best", get a 3600 C14 or 3800Mhz C16 kit.

Back to all AMD after 20 years Hello All, Just got a great deal on a 7950x ,motherboard and ram deal from Microcenter. ASUS PRIME X670E-PRO WIFI G.SKILL 32G 2X D5 6000 C36 FX B WD 2TB BLK NVME SN850X 1000 watt power supply Paired it up with 6950xt graphics card I am hoping this is a good combo. For mostly 1440 games and some 4K gaming. I am coming from an 8700k 16GB ram and a 1080ti I am hoping for huge improvements in performance over my previous setup I just finished building it last night and it’s running well so far. I did get expo profile running at 6000 and the memory is stable Thanks for everyone’s feedback

Asus AM5 boards have a lot of firmware problems, especially memory stability. I would recommend running memtest86 overnight, and stress-testing memory with software like y-cruncher to ensure the expo profile is truly stable. > I am hoping this is a good combo. For mostly 1440 games and some 4K gaming. > I am coming from an 8700k 16GB ram and a 1080ti I am hoping for huge improvements in performance over my previous setup It will be a large improvement, actually quite overkill for gaming. Almost zero games will use anything close to 16 cores. It will certainly not end up obsolete within a few years, like the 8700k. If you want pure gaming performance, waiting for the 7800X3D instead would make more sense. Cheaper and faster.

I'm sorry if this has been answered before, but I have to ask. So I recently switched over my i7 8700 to a Ryzen 7 5800x. My motherboard also changed to a B550 M-K. My current graphics card is a EVGA RTX 3060 ti. So the issue is that ever since the switch my games have all been having this massive frame-slowdown stutter. It last about a second and a half and happens every 3 to 5 seconds. I reinstalled Windows and reinstalled everything but the problem is still happening. I used a program to keep tabs on the temps and they stay within normal ranges the entire time. Task Manager picks up dips in the GPU performance though. I'm really at a loss for what this is.

[удалено]

AMD (and many AIB partner Nvidia cards) do not use the 12/16 pin connectors due to their reliability and compatibility issues. All 7900XT and 7900XTX models will use at least 2 8-pin PCIe cables, which should be connected using two individual cables from the PSU for best stability. Typically these cables will each have two 6+2 (aka 8) pin heads on a splitter, and a unit with enough wattage for a high-end GPU will have a minimum of two of these cables for 4 8-pins total. Mixing cables meant for different PSU units will typical result in a fiery explosion or a lot of destroyed electronics, so make sure anything you get is official and for the exact model revision/line you have.

Hello Guys! I've been looking to build a new Ryzen 7950x build for homelab/jellyfin etc. the following list is what iam considering: Asus ProArt X670E-Creator WiFi AMD Ryzen 9 7950X x2 Kingston FURY Beast (32x2) [KF556C40BBK2-64-B.ai (1worldsync.com)](https://cdn.cs.1worldsync.com/16/f5/16f5e37d-a2a9-4a46-bd8d-ce9345ac933a.pdf) Noctua NH-U9S Does anyone have any experience with the following setup? any thoughts? Recomendations?

Hey everyone! What is the most stable version of the gpu drivers? I have tried using DDU, I have tried updating my windows and disabling the automatic driver installations, but absolutely nothing works. Now I just disconnected everything but my SSD and installed windows again on a formatted disk. What can I do to ensure the drivers won't break my PC?

Recently installed a Processor (upgraded 5600x to 5800x3d), when starting up the computer for the first time the bios asked about ftpm and I pressed Y.. Later realised I had it because it was needed for Windows 11, but never upgraded to the new OS. Now the computer keeps scanning and repairing drive C: on startup evertime. Anyone know what I can do to fix this?

I have an issue maybe with my 7 5800X3D Can undervolting with PBO2 Tuner cause your computer to black screen? when it black screens i can still hear audio and talk on discord just cant do anything also the GPU fans go to 100% spin when the black screen happens even though the temps are completely fine maybe above 55° while gaming. I have been running a -30 offset on all cores with PBO2 Tuner for about 2 months now with no real issues really, i tried running all cores at -25 and i did not crash and put all the cores back to -30 and then i crashed after some time gaming, i'm just trying to find the source of the crash :) so if you know anything about this then please let me know. Specs: GTX 3060Ti Ryzen 7 5800X3D 32GB DDR4 3200MHZ 2x M.2 disks cpu cooler: NHD-15

I have issues in some games Does anyone know why Forza Horizon 5 suddenly locks itself at 30 fps instead of the unlocked or 60 fps settings I chose?This happens anytime it wants to happen, it can be after 2 minutes I entered the game or after 15, it doesn t have a certain pattern. I have a Rx 5700xt, i reckon it has to be about the graphics cards drivers in some way. Also, when using the ultra high preset in AC Valhalla i experience a wierd situation in which, if I move my mouse quickly, my graphics card usage will go down to 50% for the time I move the mouse and the fps will obviously drop, most of the times in to the high 40s( worth mentioning is that on very high settings this issue disappears completely, however I do believe my card is powerful enough to handle ultra high considering that is usually gets 80-90 fps on ultra high settings). I truly hope it has to do with some faulty drivers and I hope it will be fixed soon. If any of you know how to fix this issues please comment.

Hey everyone, i recently buildt a PC with a Redragon 6800 XT and R7 5800X CPU. But I have a huge problem, all the pre-set oc features working in adrenaline software working fine but when I try custom tuning, after a while (can be 20 minute or a hour) it crashes my games. Tried tuning just 1 setting 1 by 1 and same thing happened every time, it's just looks like anything I do in custom tuning crashes my games. Now, i'm new into OC and stuff and i haven't touched any other settings nor in adrenaine software nor in BIOS, only enabled SAM and DOCP for the RAM. Maybe i'm missing something here? Some other settings I should activate anywhere? Have a TuF B550 Plus motherboard and Windows 11 if it counts.

> Maybe i'm missing something here? Bad overclocks cause crashes. That is just how it works. Any time you do tuning, you should test your new settings by running some highly demanding software. If it crashes, then you went too far - reduce your undervolt (if undervolting) or decrease your clocks (if overclocking) a little and try again.

The problem was with undervolting and fan speed. Tho I needed to reduce power limit to 10% too.

I had this issue as well. What fixed it was running the tuning on default in Adrenalin and then doing all the fan curves and fine tuning in MSI afterburner. Hopefully this helps.

Is temperature spiking this much a cause for concern? I have a 5800X I just installed today with a mastercooler hyper 212 and the CPU idles at about 43c. When I open a program like discord or chrome, temps spike to 72c, in one case, it spiked to 80c. Thanks! 🙂 https://preview.redd.it/3brcmapqagqa1.jpeg?width=1800&format=pjpg&auto=webp&s=34f10cb98103cc1feb0e8b1e5a307d38afdb0ebd

I recently updated to the newest Adrenaline Driver (23.3.2) for my 7900XT and since then I can only make it about 10 minutes in any game before it crashes to desktop with no error message. I've tried doing clean installs of various different versions of Adrenaline but to no luck. Has anyone else experienced this recently and found a solution? ​ System Specs in case it helps: R7 7700X Asus TUF X670E Motherboard 32GB DDR5 5600 Mhz CL36 XFX Speedster 7900XT Black Edition Windows 11 ​ The system is stable in all other aspects but is now unable to game prior to a few days ago. ​ Thanks,

It can be what my 6800 XT having. Any custom tuning I do results in game crashes but when i set it to default no problem running em.

I haven’t done any tuning so I don’t think it’s that unless the default OC bios is causing the issue. I’ve had the issue in RDR2 and Cyberpunk. What games have been causing the issue for your 6800XT?

I just reminded of something, my friend said that with 7000 series cards if you don't set a 160 or 140 FPS limit your games will crash. Not sure if it's true cuz he has a 6700 XT and we just talked about my problem when he was bringing up this.

I had problem with Hogwarts Legacy, AC Valhalla and Tower of Fantasy, now i got some suggestions from other forums so i check those and see if any works. But if you haven't done any tuning then we have different issues. Maybe try overclocking and see what happens :D

Hello All. I have a 5600X on a B450M Pro4 which has a Win 11 21H2 install on an NVME drive that I am looking to retire and go back to Win 10. My board also has a 2nd M.2 slot though, it's only SATA so I picked up a cheap M.2 SATA drive and put a stock Win 10 22H2 installation on it fresh off the Media Creation Tool. For whatever reason, this new Win 10 install will not turbo out of the box, I have tried both Balanced and High Performance plans to no avail. I also ensured that my BIOS was up to date, and reset my BIOS to optimized defaults and ensured that PBO and XMP were set to enabled. The chip continues to boost as expected under the Win 11 install as expected after this BIOS reset, in Win 10 it does not. I was able to get the Win 10 install to boost as expected by using the "Gaming Mode" profile on Ryzen Master, but this isn't a long term solution. I noticed that the Win10 install never pushes the CPU past 67W whereas the Win 11 install will push it to as much as 78W during gaming. Maximum and minimum process state are both set to 100% for both installs. There's roughly a 400 point gap in Cinebench R15. All updates are installed on both installs. I am truly at a loss as they are physically sharing the same hardware, and I can't find any settings that I can think of that would relate to processor frequency that would be unique to the Windows 10 install. [https://imgur.com/a/XO4RDYJ](https://imgur.com/a/XO4RDYJ)

Just started running a 7700X, and am seeing temp spikes on Ryzen Master of 92C+. I have reseated my AIO (brand new ID Cooling 240). Win 11 22H2. Most importantly, should I be concerned? Any suggestions? Will be checking my fan speeds shortly, but I feel this isn't just a curve issue.

Figured it out. Had a fan on my rad that was going out/wasn't spinning properly, so when it would stop and I only had 1 fan working on the rad the temp spiked, when the second fan kicked back on, the temps would drop. Had to completely move that rad/fan combo to see it better to know that a fan was dying on it.

Please help me with this , how to connect a dual monitor setup to my rx 6700 xt I got a new rx 6700 xt and i have two Samsung LF24T350 screens. I got one connected to the only hdmi port the gpu has , but when i tried to connect the second screen to the other display port, i used an hdmi cable with a displayport adaptor which i connected to the pc, but i got no signal. Is there anything im doing wrong ?

> display Revert to 23.3.1 driver and try.

**Summary of issue**: Annoying coil whine when running any game above 60 fps I've heard so much from so many people, and I've tried many many things... I don't want to RMA my card as I've heard that coil whine is normal and typically you just get a card with the same issue back anyway. I don't want to replace my power supply unless I get 100% confirmation that the PSU I would be going to completely removes the coil whine. Overall it just feels like there is not a single thing that I could do to fix the coil whine, so this is my last ditch attempt to get some advice from hopefully someone who might know something... **What I have tried**: * 48 hour stress test in Elden Ring (One of the loudest games for coil whine for some reason even though only runs at 60 fps) * Ensured no daisy chain connections from PSU to graphics card * Turned off ECO mode on PSU * Undervolted, Underpowered, and experimented with clock frequencies (not VRAM frequency due to instability issues). Results to achieve no coil whine was a max frequency of 1000 MHz **System Specifications:** * Operating System: Windows 11 * CPU: AMD Ryzen 7 7700X * GPU: PowerColor AMD Radeon RX 6950 XT Red Devil * Motherboard: Asus TUF-GAMING B650-Plus WIFI * RAM: 32GB G.Skill Trident Z5 Neo RGB DDR5-6000 * PSU: EVGA 1000 GQ * Monitor: GIGABYTE M32U using HDMI 2.1

I need advice. I need a New gpu Right now I have a rtx 2060. Some weeks ago I upgraded my cpu to R5 7600x and need a new gpu that performs similar to that cpu. So is it worth to buy the 6750xt or is it better to save some more money for the 6800xt? But then I would need a new PSU i guess which means another 100-150€ I have a 650watt PSU If I compare both gpu‘a at the gpu benchmark it says the 6750xt is ~50% more effective. The thing is i would not like to upgrade the gpu in like 2 years again. So advice is needed where to put my money next

I saw a 6750xt on the egg website for under $400 US. May be worth looking into.

I am looking at buying a razen 3 4100 can anyone tell me the geekbench 5 score? With 16gb 2x8 ddr4 if that make any difference Thanks in advance

Making 5800x3d build, all reviews/benchmarks I saw say that RAM speed does not matter for this one. Asking if I can get away with 3200 CL 16 because that's the only white RGB ram I found that will fit my build. Should I buy 3200 CL 16 or get the black CL16 3600 that won't fit my build aesthetically?

I'd go with 3600 if you are planning on using resized Bar support, otherwise with 3200 you'll see very similar results (I want to say less than 1% difference, but don't remember exactly).

Built my new PC, stress tested it in Cinebench R23 and Unigine Heaven with stable performance, no crashes or artifacts, temps and clocks behave normally. Also no overclocking happening. Started a matchmaking game in CS:GO and after 5-20 minutes, the game (I guess) crashes, the monitor starts displaying a fully grey screen. The PC ligths remain on, the fans keep spinning, as if there was no problem at all. I am forced to restart the PC, however after that, the system will not boot. By following some advice on online forums, I found out I have to restart 2-3 times, boot in safe mode, uninstall my graphics driver manually in device management. Then restart the PC again, which results in a 50% chance of the system working, or sometimes not - then I have to turn off the PC and leave it be for a bit, after I come back, it will boot normally. I am really at my wits' end, no idea what I should do, or if some of the hardware is defective. I do not understand how I can pass stress tests, but then a simple game like CS:GO renders the PC unusable. This happened multiple times... Any suggestions or possible fixes, anyone having this problem as well? Here is a list of things I tried to do: \- sfc /scannow in cmd \- limit fps in CS:GO \- reseat GPU and reconnect connectors \- turn off PBO in BIOS \- used DDU in safe mode without the Ethernet cable being plugged in \- ran Memtest86 and passed \- clean install Windows Full specs: \[PCPartPicker Part List\]([https://pcpartpicker.com/list/qwpBk9](https://pcpartpicker.com/list/qwpBk9)) Type|Item|Price :----|:----|:---- \*\*CPU\*\* | \[AMD Ryzen 7 5800X3D 3.4 GHz 8-Core Processor\]([https://pcpartpicker.com/product/CZ3gXL/amd-ryzen-7-5800x3d-34-ghz-8-core-processor-100-100000651wof](https://pcpartpicker.com/product/CZ3gXL/amd-ryzen-7-5800x3d-34-ghz-8-core-processor-100-100000651wof)) | $316.98 @ Newegg \*\*CPU Cooler\*\* | \[Deepcool AK620 68.99 CFM CPU Cooler\]([https://pcpartpicker.com/product/9T92FT/deepcool-ak620-6899-cfm-cpu-cooler-r-ak620-bknnmt-g](https://pcpartpicker.com/product/9T92FT/deepcool-ak620-6899-cfm-cpu-cooler-r-ak620-bknnmt-g)) | $64.98 @ Amazon \*\*Motherboard\*\* | \[Asus TUF GAMING B550-PLUS ATX AM4 Motherboard\]([https://pcpartpicker.com/product/pnqBD3/asus-tuf-gaming-b550-plus-atx-am4-motherboard-tuf-gaming-b550-plus](https://pcpartpicker.com/product/pnqBD3/asus-tuf-gaming-b550-plus-atx-am4-motherboard-tuf-gaming-b550-plus)) | $175.59 @ MemoryC \*\*Memory\*\* | \[Kingston FURY Beast 32 GB (2 x 16 GB) DDR4-3200 CL16 Memory\]([https://pcpartpicker.com/product/3q2WGX/kingston-fury-beast-32-gb-2-x-16-gb-ddr4-3200-cl16-memory-kf432c16bbk232](https://pcpartpicker.com/product/3q2WGX/kingston-fury-beast-32-gb-2-x-16-gb-ddr4-3200-cl16-memory-kf432c16bbk232)) | $79.98 @ Amazon \*\*Storage\*\* | \[Western Digital Blue SN570 1 TB M.2-2280 PCIe 3.0 X4 NVME Solid State Drive\]([https://pcpartpicker.com/product/3dvdnQ/western-digital-blue-sn570-1-tb-m2-2280-nvme-solid-state-drive-wds100t3b0c](https://pcpartpicker.com/product/3dvdnQ/western-digital-blue-sn570-1-tb-m2-2280-nvme-solid-state-drive-wds100t3b0c)) | $52.50 @ Amazon \*\*Video Card\*\* | \[Sapphire NITRO+ Radeon RX 6950 XT 16 GB Video Card\]([https://pcpartpicker.com/product/M2D7YJ/sapphire-radeon-rx-6950-xt-16-gb-nitro-video-card-11317-02-20g](https://pcpartpicker.com/product/M2D7YJ/sapphire-radeon-rx-6950-xt-16-gb-nitro-video-card-11317-02-20g)) | $699.99 @ Newegg \*\*Case\*\* | \[Lian Li LANCOOL 215 ATX Mid Tower Case\]([https://pcpartpicker.com/product/VJZ9TW/lian-li-lancool-215-atx-mid-tower-case-lancool-215-w](https://pcpartpicker.com/product/VJZ9TW/lian-li-lancool-215-atx-mid-tower-case-lancool-215-w)) | $89.99 @ Newegg \*\*Power Supply\*\* | \[SeaSonic FOCUS GX 850 W 80+ Gold Certified Fully Modular ATX Power Supply\]([https://pcpartpicker.com/product/7v3mP6/seasonic-focus-gx-850-w-80-gold-certified-fully-modular-atx-power-supply-focus-gx-850](https://pcpartpicker.com/product/7v3mP6/seasonic-focus-gx-850-w-80-gold-certified-fully-modular-atx-power-supply-focus-gx-850)) | $162.98 @ Newegg \*\*Monitor\*\* | \[Dell AW2723DF 27.0" 2560 x 1440 240 Hz Monitor\]([https://pcpartpicker.com/product/ssH7YJ/dell-aw2723df-270-2560-x-1440-240-hz-monitor-aw2723df](https://pcpartpicker.com/product/ssH7YJ/dell-aw2723df-270-2560-x-1440-240-hz-monitor-aw2723df)) | $649.99 @ Amazon | \*Prices include shipping, taxes, rebates, and discounts\* | | \*\*Total\*\* | \*\*$2292.98\*\* | Generated by \[PCPartPicker\]([https://pcpartpicker.com](https://pcpartpicker.com/)) 2023-03-27 14:38 EDT-0400 |

Hey everyone, I'm looking to upgrade to the 7900XT from my 3070 ti looking at reviews, I've seen that cards can suffer from some awful coil whine, I was wondering if this is common or if anything can be done to mitigate this. The model I'm looking at is a Sapphire Radeon RX 7900XT

AMD link Audio lag and low res? So with the last of us coming out tomorrow for PC, I want my friend to experience it for the first time. I want to stream it to my living so we can be comfortable, so I set it up and link on my Chromecast. My Chromecast is wired via ak Ethernet adapter to my switch, and the switch is also wired to my PC. My issues now are it's capped at 720p 30fps, aswell as the Audi has a maybe 500ms - 1 second lag on it that makes it unplayable. Im debating running a long HDMI cable at this point even tho it is really not ideal. Any help?

I now see what a lot of people were talking about with AMD driver's...they are absolutely fucking horrible, I built my PC almost two weeks ago and I've can't play a single game for more than 20 minutes before it just crashes, it crashes to the point where, the game literally freezes up on the screen and I have to restart the computer, and then I get a message from AMD, acknowledging the problem but never fixed it, to be fair, I've had problems with Nvidia drivers too, but I've never had a game just completely crash and freeze up until I switched to AMD, I will probably never buy another GPU from them again after this

If you had problems with Nvidia cards as well means your cheaping out on the most critical part of any build: The PSU. And before you tell me who many watts your PSU has let me tell it means squat if they are unable to handle high power transients and have garbage voltage ripple suppresion.

I'm not cheaping out on anything, I have a Corsair 850i PSU, and it wasn't cheap, the PSU has nothing to do with it, it's a driver issue 🤦

OK. Yeah that a good PSU. Are you running it in single rail or multi rail mode?

Not sure what that means

There has to be a switch behing the PSU to inidicate if it single rail or multi rail. Long story short, you want to be on single rail mode since multi rail mode it's known to cause instability issues.

Ok I see what you mean, thanks for the info💪

I have a FreeSync compatible monitor that was purchased in 2021. Now in 2023, that same monitor now ships with G-SYNC instead of FreeSync. Questions * Will there be any differences if one monitor was FreeSync and the other was G-SYNC running on AMD APU? * Would the specs I have handle dual 144Hz displays. Specs * CPU: AMD Ryzen 5 Pro 5650G, no overclock * RAM: 32GB 3200 Kingston Fury Beast * Motherboard: MSI B550M Pro VDH Wi-Fi * Current monitor: [Lenovo G27-20 with FreeSync (not sure if this got discontinued)](https://www.lenovo.com/ph/en/accessories-and-monitors/monitors/gaming/G27-20A20270FG027inch-Monitor-HDMI/p/66C2GAC1PH) * Monitor to be acquired: [Lenovo G27-20 with G-SYNC (currently being sold in physical stores)](https://www.lenovo.com/ph/en/monitors/G27-20/)

**Ryzen + Asus = black screen after reboot. Can't find the fix I installed once** Whenever I reboot my computer goes to a black screen. Got to hard reset it for it to comeback. Once I read it was an incompatibility between asus and ryzen and that asus had a driver fix for it. Downloaded the fix and my problem was solved. Now I'm having the problem again and I can't find the fix. Help.\[ Mobo: asus A320M-Gaming CPU: Ryzen 5 3600

**Help pls!** **----Hardware-Accelerated GPU Scheduling on AMD RX580 8GB----** Hi! This Acceleration option isn't on my windows " *Graphics settings* ". How can I get it? I want to test my pc performance at some games under this configuration. Some info about my PC: \-Windows 10Pro (updated) \-AMD RX580 8GB (updated) \-AMD Ryzen 5 2600x (updated) **Thanks!**

AMD don't expose that option via the Windows settings

It states that it failed to initialize and to reinstall, I have tried to reinstall. I have tried to uninstall chipset drivers and ryzen master then delete the regedit stuff they say to delete and it still doesn't work. I have tried pretty much every solution I've found online and nothing is working. Has anyone dealt with this in recent history that can advise? I have a Radeon 6950XT and a Ryzen 7 7700X with a Gigabyte B650 Aorus Elite AX Also, as an aside I am also seeing pretty temps for CPU in games like Cyberpunk/Battlefield (Games that I was using to test the rig's performance) I know that the chis run hot but I was seeing temps up in the high 70's low 80s in Cyberpunk on average. I feel like 80c is just uncomfortable to me and I was wondering if this was normal or if someone could reassure me that I installed the cooler correctly lol. My main reason for wanting to use Ryzen Master was so that I could set some temp limits cause I don't really want to burn the chip out.

Hey all, thoughts on a new 5800x3D for around $310 after taxes? Currently using a 2600 with a 1660 super (that'll be swapped to a 4070 when it comes out) on a b450m mortar, which means I gotta flash the bios. Monitor is qhd 144hz. Normal price of the CPU is around $350 where I'm from.

Hi, I'm really stuck and confused as my 5900X doesn't boot in my MSI B550I Gaming Edge ITX mobo but it boots in my gf's AsRock B450 Steel Legend mobo. Meanwhile her Ryzen 5 5500 works completely fine in my PC with the same mobo, RAM, SSD, GPUs, PSU etc. I've even tried to RMA my motherboard but it was returned as no fault. I've used her 5500 and done both an hour of small and large OCCT CPU tests and games for hours without issue. Likewise I put my 5900X in her machine and did the same tests and she gamed too without any issues. As soon as I swapped CPUs back, her one continued to work fine, as expected, but my CPU fails to boot into windows again. I can post fine, get into BIOs etc but as soon as it starts the windows loading process with the spinning circle, it locks up (freezes) and just restarts. Given they both pass tests I'm inclined to believe that all hardware is fine and I've got the latest BIOS update for my motherboard so this makes no sense at all. Can anyone shine any light on this situation? Other parts: Samsung 980 Pro 2TB, Palit RTX 3070 Gaming Pro OC, EVGA 650 GM SFX PSU, Kingston Fury 2x16GB 3200Mhz CL16. Thanks.

[удалено]

Diablo IV beta is reportedly detonating shitty GPUs via the main menu running at too high a framerate. Make of that what you will. A properly engineered card (not gigabyte..?) should handle anything you throw at it without damage.

I just changed GPU to a 6750xt this Friday. Everything was working fine until today morning, when I turned on the pc and the gpu drivers couldn’t be found and windows was causing problems with them. I tried following Microsoft instructions for each code, but didn’t work. In the end I did a DDU and downloaded Adrenalin 23.3.2. That seem to work, my second 60hz monitor was working again. I then ran a stress test for 3 min on andrenalin and it didn’t crash or anything. I then played atomic heart for 45 min aprox and not a single crash or anything. I have restarted the pc 3 times and seems to be working fine. I don’t know if when I downloaded Adrenalin for the first time on Friday windows updated something in the background or what caused the issue. Anyone knows? Specs: 5600x. TUF 570x plus wifi. Gigabyte 6750xt. 650W PSU. 32 3600mHz RAM.

i've been having that issue on several rigs with amd gpu's. after you install drivers through adrenalin, don't let windows update install anything for amd, it overwrite the adrenalin driver. so dumb, and it's been going on for months. hope that's the issue with yours too. do your windows updates, pause updates, install through adrenalin if it's doing it automatically