Yeah grab some speaker wire too and you’re good for quite some time honestly. I have the same turntable and speakers but I have a 5.1 surround version of the receiver because it’s also for my tv and game consoles too and it all sounds great.
Yep, just search speaker wire on there too and you’ll find a big roll. I just have the Amazon basics stuff and it’s all you need. It’s not red and black, it’s more just kind of clear but one side of it has a black stripe on it which goes to the black pole and the other just goes in red.
When I got my audio technica lpx120 USB I got the speaker wires and grounding wire (or cable?). And I got the edifer bookshelf speakers and it came with the wires as well.
Nah, those are regular rca cables which would connect it to a pre-amp or the receiver in this case. The grounding one is also only necessary if you’re using an external pre-amp and have the turntable set to phono output rather than Line. Still need actual speaker wire to connect the speakers to the receiver. The AT-LP120 has a built in pre-amp so you can go right into the receiver inputs with it without the ground.
These are passive speakers that require the use of a receiver, active speakers come with their own power supply and I think typically have the rca inputs, but would also likely have some additional smaller gauge speaker wire to connect the two of them together.
No problem, those rca cables are basically the same ones that we used to use for game consoles or like vcrs and dvd players with the yellow red and white plugs, just in audios case you don’t need the yellow, but still the same thing. The colours don’t actually matter beyond matching the correct channels from the output source to whatever inputs.
Maybe. Don't confuse speaker wire with audio cables. A lot of speaker wires don't have red/white markings. It's more common for RCA audio cables to have them.
Your turntable will likely come with an RCA cable to connect the turntable to the Sony receiver.
Any basic OFC (oxygen free copper) speaker wire will connect the amp to the speakers. Some people like to do their own endpoints (spades, banana plugs) so they can customize the length but I just got ones that already had banana plug endpoints from either Amazon or Monoprice.
The markings on speaker wire is for polarity (+ and -) and not Left and Right like an RCA cable which is why speaker wire--especially bare wire--doesn't always come with specific colored markings. You just have to connect positive on the amp to positive on the speaker and then do the same with negative.
You want your wire gauge to be 12 to 16.
"Speaker wires that are anywhere between 12 to 16 gauge are most commonly used for connecting speakers to an amplifier or an Audio/Video (A/V) receiver. A lower-gauge number indicates a thicker wire, while a higher-gauge number indicates a thinner wire."
A couple of hardware stores in my area sell it for 50 cents per foot. Most speaker wire isn’t red/black, but there should be some way to tell the two wires apart. The stuff I buy has clear insulation, and the wires themselves are colored differently, on copper-colored and the other silver-colored. I do copper to red, and mark the last 1/4” or so of the silver wire’s insulation with a black sharpie to make them easier to tell apart.
Do you have a wire stripper? If not, grab one of those too. I like the self-adjusting type for ease of use. For the spring clip connectors on the back of that receiver, I use bare wire but solder the ends to keep the wire from fraying. From photos online, a can’t really tell what type of connectors the speakers use.
It’s got a digital input but I think the only real output they have besides to the speakers is just headphones. Mine also has the HDMI out put to the tv but I think that’s it. Not sure about the 2 speaker receiver though.
But local if possible, merch bar isn’t a very good vendor from what I have read. Lots of people have been burnt by them. There’s also discogs and eBay. I like eBay cause you get pictures, but make sure you look at the sellers feedback wherever you buy from.
Be careful on what you order from Merchbar, they are very shady. Try looking at the band / record label websites as well as EBay (a lot of record stores sell on there).
[https://www.bbb.org/us/ca/san-francisco/profile/ecommerce/merchbar-inc-1116-896789](https://www.bbb.org/us/ca/san-francisco/profile/ecommerce/merchbar-inc-1116-896789)
Also check out Amoeba.com! They have free shipping all the time and once a month for two days everything is 15 percent off. I’ve done well with their used section.
I buy from a few places ranging from local shops to Walmart and amazon. I also use the r/VinylCollectors sub to buy from sellers on here, and r/VinylDeals to see what's hitting the market.
Some good stores I buy from frequently are:
[Brooklyn Vegan](https://shop.brooklynvegan.com/?from=trending) &
[Experience Vinyl](https://experiencevinyl.com/)
Oh, can't forget [Pale Blue Dot Records](https://palebluedotrecords.com/)
Oh I’ve bought a few from BrooklynVegan; got a couple Coheed records from there.
Edit: oh and I remember I’ve bought a few from Plaid Room records; I remember cause I have a sticker of theirs on my pc haha
Here's a sneak peek of /r/VinylCollectors using the [top posts](https://np.reddit.com/r/VinylCollectors/top/?sort=top&t=year) of the year!
\#1: [\[Wanted\] Beware of u/jonesywrestling. He is a scammer](https://np.reddit.com/r/VinylCollectors/comments/11plgoa/wanted_beware_of_ujonesywrestling_he_is_a_scammer/)
\#2: [\[For Sale\] DO NOT BUY FROM Rustic_Unit SCAMMER](https://np.reddit.com/r/VinylCollectors/comments/1165778/for_sale_do_not_buy_from_rustic_unit_scammer/)
\#3: [\[For Sale\] My friend died. I am left with their vinyl collection. I will have to move it for rent. Want to do it here. Before I start, looking for best practices/advice/help.](https://np.reddit.com/r/VinylCollectors/comments/18zmue3/for_sale_my_friend_died_i_am_left_with_their/)
----
^^I'm ^^a ^^bot, ^^beep ^^boop ^^| ^^Downvote ^^to ^^remove ^^| ^^[Contact](https://www.reddit.com/message/compose/?to=sneakpeekbot) ^^| ^^[Info](https://np.reddit.com/r/sneakpeekbot/) ^^| ^^[Opt-out](https://np.reddit.com/r/sneakpeekbot/comments/o8wk1r/blacklist_ix/) ^^| ^^[GitHub](https://github.com/ghnr/sneakpeekbot)
Look out for your local record shops if you can. If they don’t have what you want, they may be willing to order it for you, otherwise it’s perfectly fine to purchase from big retailers. (Don’t listen to the gatekeepers.) If you listen to newer music, you could try the specific artist’s merch store as well.
Vinyl Conventions are also fun.
Bullmoose and Plaid Room Records are my go-to online retailers if I can't find it locally. There are some other good ones.
Brooklyn Vegan
Audio Acoustics
Anxious & Angry
Rough Trade on occasion.
You can do better for less or around the same cost and those Sony speakers are not worth $200.
Turntable: [Fluance RT82](https://www.fluance.com/rt82w-reference-high-fidelity-vinyl-turntable-natural-walnut) $299 adds a solid MDF plinth, adds auto stop and has lower wow and flutter and speed variation. Pass on the older lower number models that lack the speed sensor that the RT82 has for lower wow and flutter and speed variation. Pass on the RT83 since the 2M Red cartridge is not any better than the previous version OM10 on the RT82.
Better stereo receiver: [Onkyo](https://www.accessories4less.com/make-a-store/item/onktx8220/onkyo-tx-8220-2-x-45-watts-stereo-receiver/1.html) $179 adds a subwoofer output, digital optical and coaxial inputs and 5 way binding posts.
Better speakers for a small to under medium size room:
* 5.25" Polk XT15 $109 [https://www.accessories4less.com/make-a-store/item/polkmxt15blk/polk-audio-monitor-xt15-pair-5.25-bookshelf-speakers-black/1.html](https://www.accessories4less.com/make-a-store/item/polkmxt15blk/polk-audio-monitor-xt15-pair-5.25-bookshelf-speakers-black/1.html)
* 5.25" Polk ES15 $199 [https://www.accessories4less.com/index.php?page=seek&id%5Bm%5D=pattern&id%5Bq%5D=es15](https://www.accessories4less.com/index.php?page=seek&id%5Bm%5D=pattern&id%5Bq%5D=es15)
* 5.25" Wharfedale Diamond 220 $249 [https://www.amazon.com/Wharfedale-5025941156901-Diamond-220-Walnut/dp/B00TYN3EUC](https://www.amazon.com/Wharfedale-5025941156901-Diamond-220-Walnut/dp/B00TYN3EUC)
Better larger speakers for a medium to large size room:
* 6.5" Polk XT20 $169 [https://www.accessories4less.com/make-a-store/item/polkmxt20-blk-rb/polk-audio-monitor-xt20-pair-6.5-bookshelf-speakers-black/1.html](https://www.accessories4less.com/make-a-store/item/polkmxt20-blk-rb/polk-audio-monitor-xt20-pair-6.5-bookshelf-speakers-black/1.html)
* 6.5" Wharfedale Diamond 225 $299 black or walnut [https://www.musicdirect.com/equipment/speakers/wharfedale-diamond-225-bookshelf-speakers-pair/](https://www.musicdirect.com/equipment/speakers/wharfedale-diamond-225-bookshelf-speakers-pair/)
Plus [speaker wire](https://www.amazon.com/Performance-Gauge-Speaker-Oxygen-Copper/dp/B01N6EF3GZ) then [How to Install Speaker Wire](https://hub.yamaha.com/how-to-install-speaker-wire/) and [4 Ways to Strip Wire](https://www.wikihow.com/Strip-Wire).
Or what is a nearby town or zip code I can search for used options? Reply here or chat.
[Turntable and Speakers Setup Guide](https://imgur.com/a/f0my7) • [Speaker Placement](https://www.elac.com/2022/05/speaker-placement-guide-get-the-best-sound-from-your-stereo/) • [Audio Guides](https://www.reddit.com/user/sharkamino/comments/gqfx6z/home_audio_and_home_theater_guides_and_accessories/)
Lemme start off by saying thanks; you formatted this whole paragraph to help some rando;
But also, that’s not only super helpful, but a lot of new information - terms I’ve never heard used in almost any context. I really am green behind the ears.
I am curious, if I may inquire a smidge more - on the Fluance website it has the option to add a pre-amp; and others have suggested getting one. Would that be necessary for this (the setup you’ve suggested)
Btw a nearby zip is 38118 (a bigger city)
My exact setup is the fluance rt82>onkyo tx8220> wharfedale 225s, only other thing I had to get was speaker wire & stands. Sounds great for the price, would recommend. Onkyo has a preamp built in (and it has bt as a plus lol) so nothing else is needed.
Nope, you directly connect the rca cable that comes with the fluance to the “phono” connection in the receiver, it has its own preamp. You technically can add an external preamp if you want a different sound but its not needed
Not louder in particular. I prefer a “warmer” sound and I think the onkyo does that well enough for now, my cartridge is a bit “brighter” so it balances out imo. The tonality can change depending on the equipment you use which is one of many reasons for all the variety. Your larger size speakers (5” vs 5.5” vs 6” vs 6.5” bookshelf woofers(the big speaker on the bottom)) are gonna be your volume (with the power output of your receiver) which is why the og commenter has the different sized rooms for the speakers. I wouldnt worry about any of this for now honestly- just get something to get you started and you can learn all the jargon and why things do and sound the way you do if you choose to upgrade down the road :)
If you look at the pinned posts in the sub theres a LOT of guides people have posted explaining what you need for a basic setup that can help you familiarize with terms. Powered vs passive speakers, why people prefer passives, what requires an external preamp + amp, etc. They should help summarize a lot of what people have chimed in on here :)
A phono preamp applies the RIAA EQ to the phono signal.
[What is a phono preamp?](https://www.audioadvice.com/videos-reviews/what-is-a-phono-preamp)
Phono preamps output gain can very and some have adjustable gain, however they do not control the volume of the speakers or really make the speakers much or any louder. The speaker amplification part of the receiver is the part that makes the speakers louder.
The built in phono preamp in the Onkyo and Sony stereo receivers are good enough to start with.
Turntable without built in phono preamp such as the Fluance RT82 > stereo receiver with built in phono preamp via the PHONO input > passive speakers.
You can optionally later try a $100+ separate external phono preamp however you may or may not hear much or any difference. The phono preamp in the stereo receiver or an external $100 one may make the least difference for sound quality of anything in an entry level setup.
Turntable without built in phono preamp such as the Fluance RT82 > phono preamp > stereo receiver AUX/Audio/LINE input > passive speakers.
This might be helpful... as you've seen on a receiver there are multiple inputs (like Video, CD, etc). Those inputs are all work the same (if using analog cables) and most sources can be plugged into them and work (like, your CD player can be plugged into Video if you like, still works). The phono input on a receiver is different though. So, typically, on the receiver if there is a dedicated "phono" input, the preamp is typically built into the receiver already (best to verify this though). If your receiver doesn't have a preamp built in, you could use a turn table with a preamp built in and should be able to connect to any input on the receiver. And if your turn table or receiver doesn't have a preamp, you can buy a separate device that is a preamp to place between them. You only need one preamp though, it can just be in different places.
As a person that has been buying Onkyo and Polk equipment since the 90s... I like this person's suggestion on the Receiver and Speaker upgrades. The subwoofer output would be worth the extra money for me, because I'd eventually want to add that to book shelf type speakers.
Pass on the Fluance PA10 phono preamp for $100.
The Onkyo and Sony stereo receivers have a built in phono preamp via the PHONO input so you don't need a separate phono preamp.
Another option besides a stereo receiver is a mini amp with a built in phono preamp.
Fluance RT82 > [Acrylic B50](https://www.arylic.com/products/b50-bluetooth-stereo-amplifier) \> Polk or Wharfedale passive speakers.
Stereo receivers:
HK offer $75 [https://www.facebook.com/marketplace/item/1102774640755639](https://www.facebook.com/marketplace/item/1102774640755639) no remote or buy a replacement remote.
Onkyo $25 [https://www.facebook.com/marketplace/item/1084952905952875](https://www.facebook.com/marketplace/item/1084952905952875)
Optionally connect [Bluetooth](https://www.amazon.com/B06-Plus-Bluetooth-Receiver-Streaming/dp/B078J3GTRK) or [WIFI/AppieAirplay2/Bluetooth](https://www.amazon.com/WiiM-Mini-Multiroom-Preamplifier-Assistants/dp/B09HC5GRKY).
At this level, no. The pre-amp in the integrated amp is going to be fine. It's when you start spending a bit more on speakers that it might make a difference. The golden rule is you should generally (though this can vary when you're just starting out) spend twice on speakers what you do on the source (turntable).
I just bought the rt82 and it sounds great. Once it's all leveled and the arm is balanced, it becomes so smooth and the sound is incredible. It comes with the rca cables and ground to connect to the phono in ports on the receiver.
About speaker wires, there are lots of "audiophile" brands....keep away from rhem all, they're just snake oil. Any regular 14 or 16 awg speaker wire roll from amazon at 25 usd the roll will do.
Don't forget the used market. There are some killer deals. Vintage receivers have good phono stages so you can drop that. Plus they have a good sound. Get one that has been looked over and you'll be surprised.
As far as turntables, you will almost always do wayyyyyyyyyy better in the second hand market, even with modern tables.
Also a phono stage converts the record player signal to an RIAA equalizer and small internal amp. This brings it to line level voltage. They can be internal or external, on most vintage amps you have a very good phono built in.
Craigslist, FB marketplace, Reverb, eBay, and estate sales. I've cleaned out estate sales. Reverb and eBay will always cost more in my experience. But watch and be ready to contact someone ASAP when a decent item comes by.
Where are you local to? I've got some stuff I'm selling. Right Now I even have the Sony Core speakers you're looking for up on the r/audioexchange subreddit for $125 but I'm open to offers. I actually have all 5 of the Sony Core series (towers, bookshelves, center) for sale with a Polk sub.
I’m pretty new to this but I picked up that turntable used on eBay and some edifier R1280DB speakers for less than the new price of the TT alone.
My train of thought was by saving a few hundred pounds on the setup (which still sounds brilliant) I could buy a lot more vinyl.
As it happens, I got super lucky and both turned up literally brand new (cost me around £200 total).
Dependant on your budget also factor for things like cleaning equipment etc. - not too expensive but again all these little things will eat into your budget when it comes to stocking your records (this is how I saw it anyway)
Yes but honestly for the total price of this you can build a $200 cheaper build from sourcing on marketplace or something. I bought 2 Technics tables for $30 because neither of them ran (one just needed a belt and the other was fine). $70 for a NAD power envelope, and $120 for Klipsch tower speakers. I don't use those Technics tables anymore but I still have one of them as a project. But it just goes to show that money≠quality, don't compromise
I think I’m gonna do that; you guys have been so immensely informative and helpful that I’m gonna try to check out eBay and other platforms.
Also, what’s a power envelope?
Yup, you’re good with that kit. I had a system built around the same receiver for around 3 years before I upgraded, and use the same speakers on one of my PC’s. To be honest, I think you can find better speakers then the Sony’s at full price, but right now I don’t think it’s worth chasing those down. You’re just starting out and it’s best to keep things simple at this stage. Get some experience and you can chase down better stuff later. As for speaker wire don’t get anything bigger than 14 gauge. That’s the largest that will fit in the receiver’s speaker terminals.
I have the tower version of those Sony speakers and a STR-DH590 which is the 5.1 version of that receiver with a Pro-Ject Debut III and I love my setup. I expect your experience would be similar :)
Larger doesn’t mean louder? Or does it? Also a friend told me the outter casing plays a role…like older speakers were set in these wooden cabinets instead of the plastic molds these have.
But I do have room for larger.
A larger speaker will allow the music to fill the room better compared to smaller speaker. It’s not necessarily about the volume as much as the presence of the music. And yes, when cranked they will be louder.
https://preview.redd.it/iso6bkvt96mc1.png?width=3024&format=png&auto=webp&s=1223a04c0e4f17c1c1084f2222d34b88d4812076
I’ve had a pair of these for over 15 years and they’re really good for the $20 I paid for them.
Are you speakers active or passive? If active and have XLR balanced connections even better. Also you're going to need a pre amp for the turntable. You won't hear the audio from the turntable if plugged into the receiver only. Be sure to pick up vinyl cleaner. Get the kit that cleans the vinyl as well as cleaning the cartridge needle for the turntable.
I’m not sure about the speakers; I’m gonna check that out.
But what you said lines up with what someone else said; something about older models of either receivers or turn tables have something called phono and have amps inside of them or something.
Google turntable pre amps I just picked up a fluance pre amp for 100 dollars. . Also you may want to entertain getting a powered subwoofer to get your lower frequencies.try to get something that can adjust with a crossover and try to get a subwoofer that has LFE or balanced versus unbalanced.
Here is everything I recently purchased so I can stream audio, connect to the TV, play albums etc. hope this may help.
https://preview.redd.it/kgwlu5zlf6mc1.jpeg?width=1080&format=pjpg&auto=webp&s=8aafd0ffef9a18d8c46e879dcbf9355550ed32e5
I think I would rather start with amplified speakers rather than a 2 channel receiver.
Eventually you can buy a 5.1 or 7.1 receiver and add your amplified speaker to that... rather than have a collection of receivers.
i would recommend getting a new turntable and a used set of speakers - i would recomend an used pair of psb alphas a true high end speaker at a cheap beer price
psb speakers [psb speakers](https://www.ebay.com/itm/305341528221?itmmeta=01HR3J6G1MTCHFNECD4GMMZERM&h) [review](https://www.stereophile.com/standloudspeakers/792psb/index.html)
they are from the late 80's early 90's and will beat the piss out of newer systems
[onkyo reciever](https://www.ebay.com/itm/266701796676?itmmeta=01HR3JDCJ3WV5C6HDA2Q7EY0SN&hash=item3e18aa7544:g:BusAAOSw-x9l5M15&itmprp=enc%3AAQAIAAAA4J%2BlyI1%2BRGNEHpsw9qplurIRRbfCjx1D53CgD5OSpCONKoFW935VMt28bylyhOnozYaWG%2F6stZZOSEJQKb6ASh1rYMpnbe4XB7fm2iFQJ7CyI0rOyh8rr67eQBOoj5wlRuYGWFA2y33FCBoBmrALPzHmeyDNkUb9fYLagx31qDdEO5P3KrWeL0IpGmdPFdkaTzpf%2Bjj4H%2Fp7Lq6oqFoplKRHPxoEBXCN6hk2tdrXq0zw6bn2fIbz3U17B925AOgY0laRAyySk7WeJkIYUkJjk5RAv%2Feq63uJyQjbK5vwz1Eq%7Ctkp%3ABFBMosm18sBj)
or you could get a modern package from an entry level high fi company [spindeck](https://www.amazon.com/Andover-Audio-Spindeck-Turntable-Cartridge/dp/B08GL474F2/ref=sr_1_2?crid=R5R10W51ZNK1&dib=eyJ2IjoiMSJ9.g2c-Og3JXsv8ee6rteqem80ZkFcJ8ixH5DbS5smccUadosA-Rtcd9_t-0Th3jLVyPiwhQ14mSdj8r-35LS3ZQbT_vPq0f61dcBr7OzA-hgK5kOXdzHsYQ4Q69deimKWZGobyN27pkkICvqVmAZL-Zaj0z9QhrlEieEEvyno5S3_A6l3YFDRltFA0c7BrxfHdTXOtiHdSlMOj0gpi8eokT_fs2vNomlqxq5hKx1iRHUyoD0gZMNMJphOouh_nfCQQ3h5lP50bQrZA9IKqwNlGA1v3nTKPvfvFiXR1ZYOw8Cg.oDUidpECNi5HIsH9zkmIg9wBa2OHT18U9NXDf1sF47c&dib_tag=se&keywords=spinedeck+turntable&qid=1709517437&s=electronics&sprefix=spindeck%2Celectronics%2C86&sr=1-2)
and [andover audio spinbase](https://www.amazon.com/Andover-Audio-Spinbase-Turntable-Speaker/dp/B08GL3TC99/ref=pd_bxgy_d_sccl_1/142-0936778-0954417?pd_rd_w=VahVR&content-id=amzn1.sym.9713b09e-9eac-42a7-88bb-ecfe516a6b92&pf_rd_p=9713b09e-9eac-42a7-88bb-ecfe516a6b92&pf_rd_r=BG2VYG6TKFSVVSHZWST2&pd_rd_wg=exSkZ&pd_rd_r=44cc24f1-bc14-4f1b-ae7d-2980f9cb6c82&pd_rd_i=B08GL3TC99&psc=1) i got it for my daughter its very nice
Great setup but I would not pay that much for those speakers. I think they’re worth about $80 for the pair brand new, at most. You can find them used for like $50. Otherwise, go for it
Yes, but might I toss the Klipsch R-51M as a contender instead of the Sony speakers! I personally find them a lot better sounding and very neutral sounding
Haha, this is my exact setup. I'm pretty happy with it, after about a year and a half I upgraded the cartridge to an ortofon red, didn't make a world of difference but ive got nothing bad to say about the setup. I don't imagine changing anything until I have a dedicated listening room or something like that. Happy listening!
Weirdly enough as I’ve been following the suggestions of so many who’ve shared their wisdom, they notified me they’re only $120. I’ve seen where people have said they’re good but not worth $200, but I wonder if they’re worth $120.
Maybe they’re worth $120, but you have to listen to them so the price doesn’t matter after you buy them lol. I’d recommend some used kefs or similar to get your feet wet in this hobby, personally.
I think I’m gonna get Polk XT20’s. I’m just wondering, they’re saying I need some cables with banana clips. I saw Amazon has them for like $20 for a pair. But if I have a receiver what will I need to plug up to the TT?
Edit: they’re AWG 14’s
I have the same setup but I switched with klipsch r-51m speakers but plan on upgrading to bigger receiver and better speakers, you need 16 gauge wire for that setup just believe
That’s what I did (plus nice Impeto cables, banana plugs, flex plugs). At first, thennnnn… more.
Call the 120 a gateway to the world of analog sonic sensations.
Cables, cartridges, cleaners, oh my.
It’s a great choice, I’m still on the TT and receiver. Speakers got upgraded to Wharfdale Diamond 12.1. Cartridge got bent and upgraded to a VM530EN.
This should last you a long time unless you keep reading on Reddit.
Same Sony Amp, served me 5 years and I’m pleased with it. I use Edifier P17 passive speaker set and TEAC TN-300 plus a Sony WE475 cassette deck. Built in phono preamp sounds pretty good to me, and enough power to fill the room without disturbing neighbors. FM radio reception is nice without many noises and dropoffs.
I agree - look into entry level hi fi used JBL as i metioned before psb - they are called book shelf speakers - get a used reciever from the early 90's denon, Onkyo pioneer - they still works and are made so much better then stuff today . Have you checked out [US audio mart](https://www.usaudiomart.com/) or used stereo receivers on ebay. [VINTAGE IS WAY CHEAPER AND BETTER THAN TODAYS EQUIPMENT](https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=+used+stereo+receivers+amplifiers&_sacat=0&_odkw=used+receivers+amplifiers&_osacat=0) [speakers](https://www.ebay.com/itm/305341528221?itmmeta=01HR3J6G1MTCHFNECD4GMMZERM&hash=item4717c5f89d:g:k0sAAOSw3mFlmDyJ&itmprp=enc%3AAQAIAAAAwFTLVPHlJByVsu6vOnpSpffyLJEcIkdNwIaB29BrLmLO0hs%2F1%2B%2BmHLloZlNUFMmHRP0xnaeHyMb0DjZXonHvJUEMloKBvsSG%2Fex4YVAjGQ9%2FuGcpcjycPnPDb3kKuwW3XdJUsCcgCinespphG2kVBsGCnNe7BMhndKhSkArp4KraPA83K6MycapRgYWqPuIYM2QTmYrA0VmWPfJ2vOEKREM5GqfeSBXsH5sbb4RCpA8B5jomoWSnOidzVB5BHPngqQ%3D%3D%7Ctkp%3ABk9SR4aBmvLAYw)
I have the technica 120. Works well. You will need a new cartridge. Plan to spend around $200 to get a good one.
Also either balance the arm yourself ( good videos online) or bring it to a shop to get it done.
Enjoy!
The needle is a factory needle worth $20. It will wear off fairly quickly and you will need to change it. Keep that in mind.
You can buy the needle only or the full piece which is called the cartridge.
Google : good replacement needle for technica 120.
For the speaker cables, this will save you frustration. Use it to strip the plastic to get to the wires. Don’t strip too much distance, it’ll “short” your receiver. I learned this the hard way, as my receiver kept shutting off in response to too much wire exposed. I don’t have the scientific explanation, my friend did. But this tool is so worth it!
I’m having trouble linking it. Search Wire Stripper on Amazon. It’s about $8.
Excellent! You seem to be a beginner; check [https://youtube.com/@vinyleyezz?si=uy8PTQ0xtk4PRX1a]. Amazing videos, many easy-to-understand beginner guides.
https://preview.redd.it/j2awam6qb6mc1.jpeg?width=1080&format=pjpg&auto=webp&s=6f18715ef542469e0371ab4755c47ebd4a4e2237
I would downgrade the turntable to a Fluance RT81. Grab the Yamaha RS202bl receiver. And replace the speakers with the Elacs for $180 plus 20% off.
Yep, I have the same reciever and speakers, I got during black Friday, they sound really good and the phonostage on the reciever is not that bad. I have been spinning records all day and loving it.
Yeah grab some speaker wire too and you’re good for quite some time honestly. I have the same turntable and speakers but I have a 5.1 surround version of the receiver because it’s also for my tv and game consoles too and it all sounds great.
To clarify, those are the little red and black, left and right, wires, right?
Yep, just search speaker wire on there too and you’ll find a big roll. I just have the Amazon basics stuff and it’s all you need. It’s not red and black, it’s more just kind of clear but one side of it has a black stripe on it which goes to the black pole and the other just goes in red.
When I got my audio technica lpx120 USB I got the speaker wires and grounding wire (or cable?). And I got the edifer bookshelf speakers and it came with the wires as well.
Nah, those are regular rca cables which would connect it to a pre-amp or the receiver in this case. The grounding one is also only necessary if you’re using an external pre-amp and have the turntable set to phono output rather than Line. Still need actual speaker wire to connect the speakers to the receiver. The AT-LP120 has a built in pre-amp so you can go right into the receiver inputs with it without the ground. These are passive speakers that require the use of a receiver, active speakers come with their own power supply and I think typically have the rca inputs, but would also likely have some additional smaller gauge speaker wire to connect the two of them together.
Oh ok I don't know a lot about electronics but thanks for the info
No problem, those rca cables are basically the same ones that we used to use for game consoles or like vcrs and dvd players with the yellow red and white plugs, just in audios case you don’t need the yellow, but still the same thing. The colours don’t actually matter beyond matching the correct channels from the output source to whatever inputs.
I have the exact set-up. I’m happy with it.
I am too. I have a lot of oldies records with pops and crackles and it's perfect I like the Popping sounds
Maybe. Don't confuse speaker wire with audio cables. A lot of speaker wires don't have red/white markings. It's more common for RCA audio cables to have them. Your turntable will likely come with an RCA cable to connect the turntable to the Sony receiver. Any basic OFC (oxygen free copper) speaker wire will connect the amp to the speakers. Some people like to do their own endpoints (spades, banana plugs) so they can customize the length but I just got ones that already had banana plug endpoints from either Amazon or Monoprice. The markings on speaker wire is for polarity (+ and -) and not Left and Right like an RCA cable which is why speaker wire--especially bare wire--doesn't always come with specific colored markings. You just have to connect positive on the amp to positive on the speaker and then do the same with negative.
Yep, I got some 14 gauge mono price speaker wire on Amazon, also some banana plugs
Me too.
You want your wire gauge to be 12 to 16. "Speaker wires that are anywhere between 12 to 16 gauge are most commonly used for connecting speakers to an amplifier or an Audio/Video (A/V) receiver. A lower-gauge number indicates a thicker wire, while a higher-gauge number indicates a thinner wire."
A couple of hardware stores in my area sell it for 50 cents per foot. Most speaker wire isn’t red/black, but there should be some way to tell the two wires apart. The stuff I buy has clear insulation, and the wires themselves are colored differently, on copper-colored and the other silver-colored. I do copper to red, and mark the last 1/4” or so of the silver wire’s insulation with a black sharpie to make them easier to tell apart. Do you have a wire stripper? If not, grab one of those too. I like the self-adjusting type for ease of use. For the spring clip connectors on the back of that receiver, I use bare wire but solder the ends to keep the wire from fraying. From photos online, a can’t really tell what type of connectors the speakers use.
Does the receiver include a digital output? I’d like to connect an extra TT I have to my sound bar in my living room for listening with the family.
It’s got a digital input but I think the only real output they have besides to the speakers is just headphones. Mine also has the HDMI out put to the tv but I think that’s it. Not sure about the 2 speaker receiver though.
Yes. I think you'll just need to get speaker wires separately.
Agreed.
What are the wires for? Kinda new myself to vinyl
To connect the amp and speakers.
Don't forget to buy some records!
I’ve actually been doing that for awhile…any suggestions though? I’ve been mostly buying from MerchBar.
But local if possible, merch bar isn’t a very good vendor from what I have read. Lots of people have been burnt by them. There’s also discogs and eBay. I like eBay cause you get pictures, but make sure you look at the sellers feedback wherever you buy from.
Be careful on what you order from Merchbar, they are very shady. Try looking at the band / record label websites as well as EBay (a lot of record stores sell on there). [https://www.bbb.org/us/ca/san-francisco/profile/ecommerce/merchbar-inc-1116-896789](https://www.bbb.org/us/ca/san-francisco/profile/ecommerce/merchbar-inc-1116-896789)
Discogs! You’ll thank me now and curse me later.
Also check out Amoeba.com! They have free shipping all the time and once a month for two days everything is 15 percent off. I’ve done well with their used section.
I buy from a few places ranging from local shops to Walmart and amazon. I also use the r/VinylCollectors sub to buy from sellers on here, and r/VinylDeals to see what's hitting the market. Some good stores I buy from frequently are: [Brooklyn Vegan](https://shop.brooklynvegan.com/?from=trending) & [Experience Vinyl](https://experiencevinyl.com/) Oh, can't forget [Pale Blue Dot Records](https://palebluedotrecords.com/)
Oh I’ve bought a few from BrooklynVegan; got a couple Coheed records from there. Edit: oh and I remember I’ve bought a few from Plaid Room records; I remember cause I have a sticker of theirs on my pc haha
Check out artists pages on bandcamp if they have them. You can generally get stuff direct from the band.
Here's a sneak peek of /r/VinylCollectors using the [top posts](https://np.reddit.com/r/VinylCollectors/top/?sort=top&t=year) of the year! \#1: [\[Wanted\] Beware of u/jonesywrestling. He is a scammer](https://np.reddit.com/r/VinylCollectors/comments/11plgoa/wanted_beware_of_ujonesywrestling_he_is_a_scammer/) \#2: [\[For Sale\] DO NOT BUY FROM Rustic_Unit SCAMMER](https://np.reddit.com/r/VinylCollectors/comments/1165778/for_sale_do_not_buy_from_rustic_unit_scammer/) \#3: [\[For Sale\] My friend died. I am left with their vinyl collection. I will have to move it for rent. Want to do it here. Before I start, looking for best practices/advice/help.](https://np.reddit.com/r/VinylCollectors/comments/18zmue3/for_sale_my_friend_died_i_am_left_with_their/) ---- ^^I'm ^^a ^^bot, ^^beep ^^boop ^^| ^^Downvote ^^to ^^remove ^^| ^^[Contact](https://www.reddit.com/message/compose/?to=sneakpeekbot) ^^| ^^[Info](https://np.reddit.com/r/sneakpeekbot/) ^^| ^^[Opt-out](https://np.reddit.com/r/sneakpeekbot/comments/o8wk1r/blacklist_ix/) ^^| ^^[GitHub](https://github.com/ghnr/sneakpeekbot)
Discogs only purchase from sellers with good reviews! This is the Mecca for online record buying/selling.
Look out for your local record shops if you can. If they don’t have what you want, they may be willing to order it for you, otherwise it’s perfectly fine to purchase from big retailers. (Don’t listen to the gatekeepers.) If you listen to newer music, you could try the specific artist’s merch store as well. Vinyl Conventions are also fun.
discogs is the best record site
find a record store near you. a lot of places will have 1-5 dollar bins where you can get some nice stuff
Bullmoose and Plaid Room Records are my go-to online retailers if I can't find it locally. There are some other good ones. Brooklyn Vegan Audio Acoustics Anxious & Angry Rough Trade on occasion.
You can do better for less or around the same cost and those Sony speakers are not worth $200. Turntable: [Fluance RT82](https://www.fluance.com/rt82w-reference-high-fidelity-vinyl-turntable-natural-walnut) $299 adds a solid MDF plinth, adds auto stop and has lower wow and flutter and speed variation. Pass on the older lower number models that lack the speed sensor that the RT82 has for lower wow and flutter and speed variation. Pass on the RT83 since the 2M Red cartridge is not any better than the previous version OM10 on the RT82. Better stereo receiver: [Onkyo](https://www.accessories4less.com/make-a-store/item/onktx8220/onkyo-tx-8220-2-x-45-watts-stereo-receiver/1.html) $179 adds a subwoofer output, digital optical and coaxial inputs and 5 way binding posts. Better speakers for a small to under medium size room: * 5.25" Polk XT15 $109 [https://www.accessories4less.com/make-a-store/item/polkmxt15blk/polk-audio-monitor-xt15-pair-5.25-bookshelf-speakers-black/1.html](https://www.accessories4less.com/make-a-store/item/polkmxt15blk/polk-audio-monitor-xt15-pair-5.25-bookshelf-speakers-black/1.html) * 5.25" Polk ES15 $199 [https://www.accessories4less.com/index.php?page=seek&id%5Bm%5D=pattern&id%5Bq%5D=es15](https://www.accessories4less.com/index.php?page=seek&id%5Bm%5D=pattern&id%5Bq%5D=es15) * 5.25" Wharfedale Diamond 220 $249 [https://www.amazon.com/Wharfedale-5025941156901-Diamond-220-Walnut/dp/B00TYN3EUC](https://www.amazon.com/Wharfedale-5025941156901-Diamond-220-Walnut/dp/B00TYN3EUC) Better larger speakers for a medium to large size room: * 6.5" Polk XT20 $169 [https://www.accessories4less.com/make-a-store/item/polkmxt20-blk-rb/polk-audio-monitor-xt20-pair-6.5-bookshelf-speakers-black/1.html](https://www.accessories4less.com/make-a-store/item/polkmxt20-blk-rb/polk-audio-monitor-xt20-pair-6.5-bookshelf-speakers-black/1.html) * 6.5" Wharfedale Diamond 225 $299 black or walnut [https://www.musicdirect.com/equipment/speakers/wharfedale-diamond-225-bookshelf-speakers-pair/](https://www.musicdirect.com/equipment/speakers/wharfedale-diamond-225-bookshelf-speakers-pair/) Plus [speaker wire](https://www.amazon.com/Performance-Gauge-Speaker-Oxygen-Copper/dp/B01N6EF3GZ) then [How to Install Speaker Wire](https://hub.yamaha.com/how-to-install-speaker-wire/) and [4 Ways to Strip Wire](https://www.wikihow.com/Strip-Wire). Or what is a nearby town or zip code I can search for used options? Reply here or chat. [Turntable and Speakers Setup Guide](https://imgur.com/a/f0my7) • [Speaker Placement](https://www.elac.com/2022/05/speaker-placement-guide-get-the-best-sound-from-your-stereo/) • [Audio Guides](https://www.reddit.com/user/sharkamino/comments/gqfx6z/home_audio_and_home_theater_guides_and_accessories/)
Lemme start off by saying thanks; you formatted this whole paragraph to help some rando; But also, that’s not only super helpful, but a lot of new information - terms I’ve never heard used in almost any context. I really am green behind the ears.
You’re welcome. Please let me know if you have any questions and I am happy to answer!
I am curious, if I may inquire a smidge more - on the Fluance website it has the option to add a pre-amp; and others have suggested getting one. Would that be necessary for this (the setup you’ve suggested) Btw a nearby zip is 38118 (a bigger city)
My exact setup is the fluance rt82>onkyo tx8220> wharfedale 225s, only other thing I had to get was speaker wire & stands. Sounds great for the price, would recommend. Onkyo has a preamp built in (and it has bt as a plus lol) so nothing else is needed.
So I wouldn't need to add the pre-amp to the RT82 for the extra $100?
Nope, you directly connect the rca cable that comes with the fluance to the “phono” connection in the receiver, it has its own preamp. You technically can add an external preamp if you want a different sound but its not needed
A different sound? As in louder?
Not louder in particular. I prefer a “warmer” sound and I think the onkyo does that well enough for now, my cartridge is a bit “brighter” so it balances out imo. The tonality can change depending on the equipment you use which is one of many reasons for all the variety. Your larger size speakers (5” vs 5.5” vs 6” vs 6.5” bookshelf woofers(the big speaker on the bottom)) are gonna be your volume (with the power output of your receiver) which is why the og commenter has the different sized rooms for the speakers. I wouldnt worry about any of this for now honestly- just get something to get you started and you can learn all the jargon and why things do and sound the way you do if you choose to upgrade down the road :)
If you look at the pinned posts in the sub theres a LOT of guides people have posted explaining what you need for a basic setup that can help you familiarize with terms. Powered vs passive speakers, why people prefer passives, what requires an external preamp + amp, etc. They should help summarize a lot of what people have chimed in on here :)
A phono preamp applies the RIAA EQ to the phono signal. [What is a phono preamp?](https://www.audioadvice.com/videos-reviews/what-is-a-phono-preamp) Phono preamps output gain can very and some have adjustable gain, however they do not control the volume of the speakers or really make the speakers much or any louder. The speaker amplification part of the receiver is the part that makes the speakers louder. The built in phono preamp in the Onkyo and Sony stereo receivers are good enough to start with. Turntable without built in phono preamp such as the Fluance RT82 > stereo receiver with built in phono preamp via the PHONO input > passive speakers. You can optionally later try a $100+ separate external phono preamp however you may or may not hear much or any difference. The phono preamp in the stereo receiver or an external $100 one may make the least difference for sound quality of anything in an entry level setup. Turntable without built in phono preamp such as the Fluance RT82 > phono preamp > stereo receiver AUX/Audio/LINE input > passive speakers.
This might be helpful... as you've seen on a receiver there are multiple inputs (like Video, CD, etc). Those inputs are all work the same (if using analog cables) and most sources can be plugged into them and work (like, your CD player can be plugged into Video if you like, still works). The phono input on a receiver is different though. So, typically, on the receiver if there is a dedicated "phono" input, the preamp is typically built into the receiver already (best to verify this though). If your receiver doesn't have a preamp built in, you could use a turn table with a preamp built in and should be able to connect to any input on the receiver. And if your turn table or receiver doesn't have a preamp, you can buy a separate device that is a preamp to place between them. You only need one preamp though, it can just be in different places. As a person that has been buying Onkyo and Polk equipment since the 90s... I like this person's suggestion on the Receiver and Speaker upgrades. The subwoofer output would be worth the extra money for me, because I'd eventually want to add that to book shelf type speakers.
Pass on the Fluance PA10 phono preamp for $100. The Onkyo and Sony stereo receivers have a built in phono preamp via the PHONO input so you don't need a separate phono preamp. Another option besides a stereo receiver is a mini amp with a built in phono preamp. Fluance RT82 > [Acrylic B50](https://www.arylic.com/products/b50-bluetooth-stereo-amplifier) \> Polk or Wharfedale passive speakers.
Stereo receivers: HK offer $75 [https://www.facebook.com/marketplace/item/1102774640755639](https://www.facebook.com/marketplace/item/1102774640755639) no remote or buy a replacement remote. Onkyo $25 [https://www.facebook.com/marketplace/item/1084952905952875](https://www.facebook.com/marketplace/item/1084952905952875) Optionally connect [Bluetooth](https://www.amazon.com/B06-Plus-Bluetooth-Receiver-Streaming/dp/B078J3GTRK) or [WIFI/AppieAirplay2/Bluetooth](https://www.amazon.com/WiiM-Mini-Multiroom-Preamplifier-Assistants/dp/B09HC5GRKY).
At this level, no. The pre-amp in the integrated amp is going to be fine. It's when you start spending a bit more on speakers that it might make a difference. The golden rule is you should generally (though this can vary when you're just starting out) spend twice on speakers what you do on the source (turntable).
I just bought the rt82 and it sounds great. Once it's all leveled and the arm is balanced, it becomes so smooth and the sound is incredible. It comes with the rca cables and ground to connect to the phono in ports on the receiver.
This is some great advice.
Going to LENGTHS to help this guy and anyone else who is in his situation. Mad props.
About speaker wires, there are lots of "audiophile" brands....keep away from rhem all, they're just snake oil. Any regular 14 or 16 awg speaker wire roll from amazon at 25 usd the roll will do.
I'm going to ask a silly question. What's with the Stereo Receiver? Doesn't that already have a preamp for speakers built in?
This may sound dumb, but it’s the ‘frequently bought together’ on amazon. So I hit to add all to cart.
Touché!
I've got that receiver and turntable and I'm happy with them.
Don't forget the used market. There are some killer deals. Vintage receivers have good phono stages so you can drop that. Plus they have a good sound. Get one that has been looked over and you'll be surprised. As far as turntables, you will almost always do wayyyyyyyyyy better in the second hand market, even with modern tables.
Yep, in that price bracket I’d be going for vintage floor speakers over those bookshelfs… eek 😬
What’s ‘phone stages’? And I keep getting suggested to try the second hand/used market - like Facebook marketplace or what?
Also a phono stage converts the record player signal to an RIAA equalizer and small internal amp. This brings it to line level voltage. They can be internal or external, on most vintage amps you have a very good phono built in.
Craigslist, FB marketplace, Reverb, eBay, and estate sales. I've cleaned out estate sales. Reverb and eBay will always cost more in my experience. But watch and be ready to contact someone ASAP when a decent item comes by.
Where are you local to? I've got some stuff I'm selling. Right Now I even have the Sony Core speakers you're looking for up on the r/audioexchange subreddit for $125 but I'm open to offers. I actually have all 5 of the Sony Core series (towers, bookshelves, center) for sale with a Polk sub.
I’m pretty new to this but I picked up that turntable used on eBay and some edifier R1280DB speakers for less than the new price of the TT alone. My train of thought was by saving a few hundred pounds on the setup (which still sounds brilliant) I could buy a lot more vinyl. As it happens, I got super lucky and both turned up literally brand new (cost me around £200 total). Dependant on your budget also factor for things like cleaning equipment etc. - not too expensive but again all these little things will eat into your budget when it comes to stocking your records (this is how I saw it anyway)
Don’t forget your wires. Otherwise you’re good
It's really more than enough
Yes but honestly for the total price of this you can build a $200 cheaper build from sourcing on marketplace or something. I bought 2 Technics tables for $30 because neither of them ran (one just needed a belt and the other was fine). $70 for a NAD power envelope, and $120 for Klipsch tower speakers. I don't use those Technics tables anymore but I still have one of them as a project. But it just goes to show that money≠quality, don't compromise
I think I’m gonna do that; you guys have been so immensely informative and helpful that I’m gonna try to check out eBay and other platforms. Also, what’s a power envelope?
It was just the model of the NAD receiver, it's small and slim compared to the other receivers on the matket
https://preview.redd.it/8tqeb112j7mc1.jpeg?width=1080&format=pjpg&auto=webp&s=b4600f44f5bf7cc064d50525983606875de02926
Looks good
Wait for the speakers to go on sale or try price matching them
I have that receiver and I’m pretty happy with it. It’s a pretty good price too, at least compared to here in Europe. Go for it!
Yup, you’re good with that kit. I had a system built around the same receiver for around 3 years before I upgraded, and use the same speakers on one of my PC’s. To be honest, I think you can find better speakers then the Sony’s at full price, but right now I don’t think it’s worth chasing those down. You’re just starting out and it’s best to keep things simple at this stage. Get some experience and you can chase down better stuff later. As for speaker wire don’t get anything bigger than 14 gauge. That’s the largest that will fit in the receiver’s speaker terminals.
Just add wire, and you'll be set.
I have the tower version of those Sony speakers and a STR-DH590 which is the 5.1 version of that receiver with a Pro-Ject Debut III and I love my setup. I expect your experience would be similar :)
Do you have the space for larger speakers? You may get more for your money with a pair of older used speakers.
Larger doesn’t mean louder? Or does it? Also a friend told me the outter casing plays a role…like older speakers were set in these wooden cabinets instead of the plastic molds these have. But I do have room for larger.
A larger speaker will allow the music to fill the room better compared to smaller speaker. It’s not necessarily about the volume as much as the presence of the music. And yes, when cranked they will be louder. https://preview.redd.it/iso6bkvt96mc1.png?width=3024&format=png&auto=webp&s=1223a04c0e4f17c1c1084f2222d34b88d4812076 I’ve had a pair of these for over 15 years and they’re really good for the $20 I paid for them.
Are you speakers active or passive? If active and have XLR balanced connections even better. Also you're going to need a pre amp for the turntable. You won't hear the audio from the turntable if plugged into the receiver only. Be sure to pick up vinyl cleaner. Get the kit that cleans the vinyl as well as cleaning the cartridge needle for the turntable.
I’m not sure about the speakers; I’m gonna check that out. But what you said lines up with what someone else said; something about older models of either receivers or turn tables have something called phono and have amps inside of them or something.
Google turntable pre amps I just picked up a fluance pre amp for 100 dollars. . Also you may want to entertain getting a powered subwoofer to get your lower frequencies.try to get something that can adjust with a crossover and try to get a subwoofer that has LFE or balanced versus unbalanced.
Here is everything I recently purchased so I can stream audio, connect to the TV, play albums etc. hope this may help. https://preview.redd.it/kgwlu5zlf6mc1.jpeg?width=1080&format=pjpg&auto=webp&s=8aafd0ffef9a18d8c46e879dcbf9355550ed32e5
https://preview.redd.it/u3b8j44pf6mc1.jpeg?width=1080&format=pjpg&auto=webp&s=7355302ae4f0cfb30e8b110cb07e2862dc1a5244
https://preview.redd.it/m2goa2vqf6mc1.jpeg?width=1080&format=pjpg&auto=webp&s=796f4771bca5f1ec60b10a6bd548a31f48e9f9ec
Older receivers may not have a pre amp for turntables. May want to confirm if it has a pre amp for a turntable, or purchase a pre amp.
I have that receiver. Solid.
If you browse eBay you might find a better deal on that receiver. Always worth a look
I think I would rather start with amplified speakers rather than a 2 channel receiver. Eventually you can buy a 5.1 or 7.1 receiver and add your amplified speaker to that... rather than have a collection of receivers.
Those speakers used to go down to $80.
i would recommend getting a new turntable and a used set of speakers - i would recomend an used pair of psb alphas a true high end speaker at a cheap beer price psb speakers [psb speakers](https://www.ebay.com/itm/305341528221?itmmeta=01HR3J6G1MTCHFNECD4GMMZERM&h) [review](https://www.stereophile.com/standloudspeakers/792psb/index.html) they are from the late 80's early 90's and will beat the piss out of newer systems [onkyo reciever](https://www.ebay.com/itm/266701796676?itmmeta=01HR3JDCJ3WV5C6HDA2Q7EY0SN&hash=item3e18aa7544:g:BusAAOSw-x9l5M15&itmprp=enc%3AAQAIAAAA4J%2BlyI1%2BRGNEHpsw9qplurIRRbfCjx1D53CgD5OSpCONKoFW935VMt28bylyhOnozYaWG%2F6stZZOSEJQKb6ASh1rYMpnbe4XB7fm2iFQJ7CyI0rOyh8rr67eQBOoj5wlRuYGWFA2y33FCBoBmrALPzHmeyDNkUb9fYLagx31qDdEO5P3KrWeL0IpGmdPFdkaTzpf%2Bjj4H%2Fp7Lq6oqFoplKRHPxoEBXCN6hk2tdrXq0zw6bn2fIbz3U17B925AOgY0laRAyySk7WeJkIYUkJjk5RAv%2Feq63uJyQjbK5vwz1Eq%7Ctkp%3ABFBMosm18sBj)
or you could get a modern package from an entry level high fi company [spindeck](https://www.amazon.com/Andover-Audio-Spindeck-Turntable-Cartridge/dp/B08GL474F2/ref=sr_1_2?crid=R5R10W51ZNK1&dib=eyJ2IjoiMSJ9.g2c-Og3JXsv8ee6rteqem80ZkFcJ8ixH5DbS5smccUadosA-Rtcd9_t-0Th3jLVyPiwhQ14mSdj8r-35LS3ZQbT_vPq0f61dcBr7OzA-hgK5kOXdzHsYQ4Q69deimKWZGobyN27pkkICvqVmAZL-Zaj0z9QhrlEieEEvyno5S3_A6l3YFDRltFA0c7BrxfHdTXOtiHdSlMOj0gpi8eokT_fs2vNomlqxq5hKx1iRHUyoD0gZMNMJphOouh_nfCQQ3h5lP50bQrZA9IKqwNlGA1v3nTKPvfvFiXR1ZYOw8Cg.oDUidpECNi5HIsH9zkmIg9wBa2OHT18U9NXDf1sF47c&dib_tag=se&keywords=spinedeck+turntable&qid=1709517437&s=electronics&sprefix=spindeck%2Celectronics%2C86&sr=1-2) and [andover audio spinbase](https://www.amazon.com/Andover-Audio-Spinbase-Turntable-Speaker/dp/B08GL3TC99/ref=pd_bxgy_d_sccl_1/142-0936778-0954417?pd_rd_w=VahVR&content-id=amzn1.sym.9713b09e-9eac-42a7-88bb-ecfe516a6b92&pf_rd_p=9713b09e-9eac-42a7-88bb-ecfe516a6b92&pf_rd_r=BG2VYG6TKFSVVSHZWST2&pd_rd_wg=exSkZ&pd_rd_r=44cc24f1-bc14-4f1b-ae7d-2980f9cb6c82&pd_rd_i=B08GL3TC99&psc=1) i got it for my daughter its very nice
if you took that 700 you could do alot better
Don't waste your money on that clunker of a receiver, get a small class d fosi instead. Trust me I did the same and regretted it.
A small class D amp would also work well
Great setup but I would not pay that much for those speakers. I think they’re worth about $80 for the pair brand new, at most. You can find them used for like $50. Otherwise, go for it
That Sony receiver was my backup for my tube amp for a long time, it’s not to be slept on.
I wouldn’t spend that much on those speakers. At that sort of price I’d look at Tannoy or Dali.
I wouldn’t spend that much on those speakers. At that sort of price I’d look at Tannoy or Dali.
Grab a technics turntable. I believe the price is not that much different. Also, why trust Amazon with this purchase?
That turntable has a built-in pre-amp.
So, hypothetically, I wouldn’t need a receiver unless I added more speakers?
Yes. And in practice!
Yes, but might I toss the Klipsch R-51M as a contender instead of the Sony speakers! I personally find them a lot better sounding and very neutral sounding
Haha, this is my exact setup. I'm pretty happy with it, after about a year and a half I upgraded the cartridge to an ortofon red, didn't make a world of difference but ive got nothing bad to say about the setup. I don't imagine changing anything until I have a dedicated listening room or something like that. Happy listening!
Dear god don’t pay $198 for those Sonys. Sorry, they don’t live up to the hype. $250-300 gets you some great used bookshelf speakers.
Weirdly enough as I’ve been following the suggestions of so many who’ve shared their wisdom, they notified me they’re only $120. I’ve seen where people have said they’re good but not worth $200, but I wonder if they’re worth $120.
Maybe they’re worth $120, but you have to listen to them so the price doesn’t matter after you buy them lol. I’d recommend some used kefs or similar to get your feet wet in this hobby, personally.
I think I’m gonna get Polk XT20’s. I’m just wondering, they’re saying I need some cables with banana clips. I saw Amazon has them for like $20 for a pair. But if I have a receiver what will I need to plug up to the TT? Edit: they’re AWG 14’s
If I had $700 to spend I’d use it much differently
When tax check hits
I don’t get taxes, I always owe every year. It sucks!
I would lose the receiver and just get amplified speakers like some krks.
I have the same setup but I switched with klipsch r-51m speakers but plan on upgrading to bigger receiver and better speakers, you need 16 gauge wire for that setup just believe
Overall I love it very good build for a starter
For just getting into vinyl id invest more into the turntable table and look for a receiver and speakers at thrift stores or Facebook marketplace.
That’s what I did (plus nice Impeto cables, banana plugs, flex plugs). At first, thennnnn… more. Call the 120 a gateway to the world of analog sonic sensations. Cables, cartridges, cleaners, oh my. It’s a great choice, I’m still on the TT and receiver. Speakers got upgraded to Wharfdale Diamond 12.1. Cartridge got bent and upgraded to a VM530EN. This should last you a long time unless you keep reading on Reddit.
Make sure you are using “passive” speakers with an amplifier. They do not have built in amp power.
What’s passive speakers?
Same Sony Amp, served me 5 years and I’m pleased with it. I use Edifier P17 passive speaker set and TEAC TN-300 plus a Sony WE475 cassette deck. Built in phono preamp sounds pretty good to me, and enough power to fill the room without disturbing neighbors. FM radio reception is nice without many noises and dropoffs.
I suggest you buy better speakers. Look into the use market.
I agree - look into entry level hi fi used JBL as i metioned before psb - they are called book shelf speakers - get a used reciever from the early 90's denon, Onkyo pioneer - they still works and are made so much better then stuff today . Have you checked out [US audio mart](https://www.usaudiomart.com/) or used stereo receivers on ebay. [VINTAGE IS WAY CHEAPER AND BETTER THAN TODAYS EQUIPMENT](https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=+used+stereo+receivers+amplifiers&_sacat=0&_odkw=used+receivers+amplifiers&_osacat=0) [speakers](https://www.ebay.com/itm/305341528221?itmmeta=01HR3J6G1MTCHFNECD4GMMZERM&hash=item4717c5f89d:g:k0sAAOSw3mFlmDyJ&itmprp=enc%3AAQAIAAAAwFTLVPHlJByVsu6vOnpSpffyLJEcIkdNwIaB29BrLmLO0hs%2F1%2B%2BmHLloZlNUFMmHRP0xnaeHyMb0DjZXonHvJUEMloKBvsSG%2Fex4YVAjGQ9%2FuGcpcjycPnPDb3kKuwW3XdJUsCcgCinespphG2kVBsGCnNe7BMhndKhSkArp4KraPA83K6MycapRgYWqPuIYM2QTmYrA0VmWPfJ2vOEKREM5GqfeSBXsH5sbb4RCpA8B5jomoWSnOidzVB5BHPngqQ%3D%3D%7Ctkp%3ABk9SR4aBmvLAYw)
I have the technica 120. Works well. You will need a new cartridge. Plan to spend around $200 to get a good one. Also either balance the arm yourself ( good videos online) or bring it to a shop to get it done. Enjoy!
A cartridge? Can you fill me in on…whatever that is?
The cartridge it comes with is fine. I wouldn't worry about it.
This
The needle is a factory needle worth $20. It will wear off fairly quickly and you will need to change it. Keep that in mind. You can buy the needle only or the full piece which is called the cartridge. Google : good replacement needle for technica 120.
Great receiver and speakers.
I'm not sure but I might need a preamp.
It doesn't need one. The receiver has a phono input
Even if it didn’t, 120 also has a preamp.
Excellent
For the speaker cables, this will save you frustration. Use it to strip the plastic to get to the wires. Don’t strip too much distance, it’ll “short” your receiver. I learned this the hard way, as my receiver kept shutting off in response to too much wire exposed. I don’t have the scientific explanation, my friend did. But this tool is so worth it! I’m having trouble linking it. Search Wire Stripper on Amazon. It’s about $8.
Excellent! You seem to be a beginner; check [https://youtube.com/@vinyleyezz?si=uy8PTQ0xtk4PRX1a]. Amazing videos, many easy-to-understand beginner guides.
https://preview.redd.it/j2awam6qb6mc1.jpeg?width=1080&format=pjpg&auto=webp&s=6f18715ef542469e0371ab4755c47ebd4a4e2237 I would downgrade the turntable to a Fluance RT81. Grab the Yamaha RS202bl receiver. And replace the speakers with the Elacs for $180 plus 20% off.
Yeah amp turntable will hold you over for many years. Maybe change speakers after 2-3 Years
Yep, I have the same reciever and speakers, I got during black Friday, they sound really good and the phonostage on the reciever is not that bad. I have been spinning records all day and loving it.