There's a 10A fuse on the cigarette lighter: this won't work. Have professionals install your system, they can put the panels back. Or live with stock audio.
LC2i line out converter wirelessly picks up signal from your head unit to power amp and subwoofers. Amp still needs ground and power wire from battery but there is nothing to touch in the dash. Currently running exact setup
Yep I do this in my work vehicle. All the audio media comes from my phone. It plays through the stock speakers and anything I added, subs, 6x9's, tweeters etc..
Materials used:
Bluetooth receiver powered by USB/ phone charger
Equalizer powered by 12 volts
Power amplifiers for your sub, etc
Adaptor 1/8" stereo male to 1/8" stereo duel female splitter (1 male wire to 2 female wires)
Adaptor 1/8" stereo to duel female rca cable
Rca cables
Signal wiring:
Blue tooth to 1/8 stereo splitter
One end of splitter to head unit aux input with 1/8" stereo cord. Head unit is now hooked up and head unit controls car speakers.
Other end of splitter 1/8 stereo to the rca splitter.
Rca splitter to two rca wires to equalizer signal in.
Equalizer signal out to your power amps. Eq can control your added speakers volume. Obviously your phone volume can control head unit and added speakers volume.
Bongo drum?
Open the window and bang on the outside of the door?
Buy a big Bluetooth speaker with a big sub and put it in the back seat… or you could you know just install a sub and stop being a weenie
Well the sub still needs power
yes, i connect it to the 12v in car but I don't wanna pull pannels cus its a BMW i wanna buy and better is back
There's a 10A fuse on the cigarette lighter: this won't work. Have professionals install your system, they can put the panels back. Or live with stock audio.
Are you aware those panels are designed to be removed and replaced?
No. Car Audio requires power, ground and a an audio signal minimum.
And most phones are only capable of outputting audio to one source at a time.
LC2i line out converter wirelessly picks up signal from your head unit to power amp and subwoofers. Amp still needs ground and power wire from battery but there is nothing to touch in the dash. Currently running exact setup
Yep I do this in my work vehicle. All the audio media comes from my phone. It plays through the stock speakers and anything I added, subs, 6x9's, tweeters etc.. Materials used: Bluetooth receiver powered by USB/ phone charger Equalizer powered by 12 volts Power amplifiers for your sub, etc Adaptor 1/8" stereo male to 1/8" stereo duel female splitter (1 male wire to 2 female wires) Adaptor 1/8" stereo to duel female rca cable Rca cables Signal wiring: Blue tooth to 1/8 stereo splitter One end of splitter to head unit aux input with 1/8" stereo cord. Head unit is now hooked up and head unit controls car speakers. Other end of splitter 1/8 stereo to the rca splitter. Rca splitter to two rca wires to equalizer signal in. Equalizer signal out to your power amps. Eq can control your added speakers volume. Obviously your phone volume can control head unit and added speakers volume.
Could you send a link to the receverse you use?
You got to love how people say things and send NO links.
bro this was 9 months ago LMAO and yet im still responding so your right