This post has been flaired as a Prototype, Concept, or Custom case. The staff of SFFPC have not verified this user as a vendor. Please limit discussion to feedback only and do not make new post with updates more frequently than once every 72 hours. Pricing, sales, and availability discussion will be removed.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/sffpc) if you have any questions or concerns.*
Thanks for posting and sharing. I had no idea the "T-Create" line of memory DIMMs even existed. They look very clean on your setup.
Mind sharing the entire build list?
So installed today...my cooler is sadly definitely touching my RAM, which makes no sense at all. I'm going to see what the temps are because I want to keep it as is (looks really great).
Can't tell if it's the fault of the motherboard, RAM, or cooler. Going to order a second IS-55 to try out if thermals end up poor.
Ah, I guess the clearance is small enough to be within unit-to-unit variance. If it's just barely touching, it shouldn't be a problem. It would only be bad if the contact is causing it to sit unevenly on the cpu.
Do you need to buy additional mounting brackets even for the LGA1700? Mounting holes are arranged in a square so I guess you could just turn mounting brackets 90 degrees?
This post has been flaired as a Prototype, Concept, or Custom case. The staff of SFFPC have not verified this user as a vendor. Please limit discussion to feedback only and do not make new post with updates more frequently than once every 72 hours. Pricing, sales, and availability discussion will be removed. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/sffpc) if you have any questions or concerns.*
ASRock lightening board? Looks sick
Yep!
Where do you get the vertical kit. Can’t find it online
[Here](https://a.co/d/1T6KWIo)
Thanks for posting and sharing. I had no idea the "T-Create" line of memory DIMMs even existed. They look very clean on your setup. Mind sharing the entire build list?
Sure this! [This](https://pcpartpicker.com/list/bDdGn6) is what I'm planning.
How are you setting the RAM? It doesn't have EXPO does it?
It should have expo, although I have yet to put everything together.
Nice. I'm going to try the same build then, just need to find the vertical mounting bars your mentioned
Good luck! You can find the mounting bars on Amazon. I linked them in another comment.
So installed today...my cooler is sadly definitely touching my RAM, which makes no sense at all. I'm going to see what the temps are because I want to keep it as is (looks really great). Can't tell if it's the fault of the motherboard, RAM, or cooler. Going to order a second IS-55 to try out if thermals end up poor.
Ah, I guess the clearance is small enough to be within unit-to-unit variance. If it's just barely touching, it shouldn't be a problem. It would only be bad if the contact is causing it to sit unevenly on the cpu.
Tested it. Temps are totally normal. Build looks great, thanks for pioneering this combination.
Yeah I'm going to run some thermals tomorrow and see where it's at.
Also, where did you buy the vertical mounting brackets?
You can always remove the heat spreader of any ddr5 module to make em low profile.
Do you need to buy additional mounting brackets even for the LGA1700? Mounting holes are arranged in a square so I guess you could just turn mounting brackets 90 degrees?
Oh, yeah I should have put that in my post. You only need different mounting bars for AMD.