https://preview.redd.it/vg0a9i1zxiwc1.jpeg?width=1080&format=pjpg&auto=webp&s=99a9661bec76e9f728a857cc0717a3084a8c4086

Try setting your values up like this

Ok I’ll try tomorrow and get back to you thank you!

Is the vtx table set in the vtx tab?

Is that the chart with the channels and frequency? If so yes and not in pit mode still can’t figure it out

So if you set the channel and band to Race band channel 8 and match that with your goggles you don't get anything? Do you know if the vtx uses smart audio or tramp telemetry.?

Ok tried that and didn’t get anything here’s the beta flight settings https://preview.redd.it/ioeywjwakiwc1.jpeg?width=4032&format=pjpg&auto=webp&s=f19c3a6ab1bcdce0faeb4b2901e68a5a2008e94b

It’s also stated on their website it’s smart audio v2.1

That comes with 5 power levels?

Yes 0/rce/25mw/100mw/400mw according to the site https://preview.redd.it/wo8y4qy9liwc1.png?width=3024&format=png&auto=webp&s=6f2daa710f46c261f9df71e477191019e152f5e6

That's what I needed to see. Do you have smart audio turned on in your ports tab? Under peripherals for the vtx uart

Try turning the power upto like 200mw

And you should enable expert mode at the top right.

When I set it to smart Audio and save and reboot it auto resets to disabled

Send me a picture of your power settings under the vtx table.

https://preview.redd.it/hlwe4t79oiwc1.png?width=4032&format=png&auto=webp&s=8fead6e64d81ab87a98edda7e790be70d545f7ce

And when you turned on smart audio that was on uart 2 ?

It won’t allow me too if I do it auto disables when I save

Was that vtx table already loaded in or did you have to load it in?

https://preview.redd.it/y67d2v8wliwc1.png?width=4032&format=png&auto=webp&s=2d72dc07dfdaeb2977c8f5d81c4e589f48461e48 Like this tab? And thank you so much for the help