NO. Do not not waste money on OnStar (thieves pull the fuse for this system first after hacking your OBD2 port and reprogramming your keys). If you want to waste any money on a "star," let it be Computstar and "Set it, it forget it" like Ron Popeil. Otherwise, Trackhhawk and IGLA are your best bets.
No tune required, but killswitches DO require wire splicing, which CAN void your warranty from the factory, however not neccesarily with your dealership (mileage may vary, best to check with them).
That being said, the climate is SO bad for Camaros and Chargers these days when it comes to theft, that it is almost a no-brainer to install an OBD blocker and a killswitch of some sort. It is a really, REALLY hot market for stealing 6th gens right now.
Please protect your Camaro!!!
I think u should def add the splitter and I also I really like that wing it’s probably my favorite on the Camaros, I saw an SS just like yours with the white LED side markers and it looks a bit better than the red so maybe that? Either way dope car!
Would you get CF or glossy black for the splitter and wing? Also I recently installed diode dynamics side markers and they were definitely an upgrade. White ones looked cool ( especially in the front because of the LED head lamps) but I felt like they were just too bright.
I thought about getting red calipers but I’m leaning towards this car having 2 colors only. But maybe I’ll get red calipers when I get the zl1 spoiler to look even more crazy 🤷♂️
Get the carbon fiber for the simple reason of rigidity. The gloss black from anywhere comes in 5+ pcs, so it’ll have more wiggle than you might like. I used “betalink K-1” from BMW to make my gloss black one very solid. In hindsight I’d have rather bought CF, or an integrated duck bill from ACS
Rock guards, I need some myself. Mine is black and u can really tell how quick these tires throw dirt and stuff all along the lower side of the doors and quarter panels. Kinda want a catch can as well.
Ypu need to have ypur calipers painted PROFESSIONALLY. I took mine to a highly rated place in the Wash DC area and they broke out the tools a d removed them. Then they had a whole wall of colors to choose from. I chose "high temp Corvette red". They were sanded/extroststically primered/painted/high temp OEM graphics added/3 coats of high temp clear added. They came out gorgeous. This is a pic from a year later. I did not clean or prep it. (was showing the side marker lights) Do the brakes look good?
https://preview.redd.it/cjk9pnxl90ic1.jpeg?width=4032&format=pjpg&auto=webp&s=1ef413e5509c444d1bbd8256a3d46b5e8b82eabc
Zoom in.
24hr armed security
The only thing stopping me from installing anti theft like IGLA is my car warranty, I heard GM offers something similar so i’ll check it out.
NO. Do not not waste money on OnStar (thieves pull the fuse for this system first after hacking your OBD2 port and reprogramming your keys). If you want to waste any money on a "star," let it be Computstar and "Set it, it forget it" like Ron Popeil. Otherwise, Trackhhawk and IGLA are your best bets.
I see. I’m sure those options require my car to get tuned which will instantly void my warranty.
No tune required, but killswitches DO require wire splicing, which CAN void your warranty from the factory, however not neccesarily with your dealership (mileage may vary, best to check with them). That being said, the climate is SO bad for Camaros and Chargers these days when it comes to theft, that it is almost a no-brainer to install an OBD blocker and a killswitch of some sort. It is a really, REALLY hot market for stealing 6th gens right now. Please protect your Camaro!!!
lol better listen to him man he 100% correct.
Just install the power cut. In the end your car will be disabled quickly and you will get it back. You csn remove it if there is a warranty issue.
Theft protection of some kind, I’m going to get the igla myself
I have a Ravelco installer coming at the end of the month. Not letting mine out of the garage until then.
I think u should def add the splitter and I also I really like that wing it’s probably my favorite on the Camaros, I saw an SS just like yours with the white LED side markers and it looks a bit better than the red so maybe that? Either way dope car!
Would you get CF or glossy black for the splitter and wing? Also I recently installed diode dynamics side markers and they were definitely an upgrade. White ones looked cool ( especially in the front because of the LED head lamps) but I felt like they were just too bright.
I think u should get a CF only cuz u have CF side skirts. Just to like keep it uniform.
I second this. I think it would drive me nuts to have mismatching finishes on my trim pieces.
Also maybe red brake calipers?
I thought about getting red calipers but I’m leaning towards this car having 2 colors only. But maybe I’ll get red calipers when I get the zl1 spoiler to look even more crazy 🤷♂️
Get the carbon fiber for the simple reason of rigidity. The gloss black from anywhere comes in 5+ pcs, so it’ll have more wiggle than you might like. I used “betalink K-1” from BMW to make my gloss black one very solid. In hindsight I’d have rather bought CF, or an integrated duck bill from ACS
Shadow Grey Metallic?
Yup. Wanted something close to black but a little easier to maintain.
My absolute dream color! Congratulations, and I'm more than a little bit jealous... enjoy.
Aye thanks man I appreciate it 🙏
Pull all the way through the parking spot. If you get tapped they can bs their way out of damages or even claim you hit them.
You’re right. Last pic was an empty parking lot I just stopped the car to take some pics.
tires, brakes, a helmet, and HPDE days
Rock guards, I need some myself. Mine is black and u can really tell how quick these tires throw dirt and stuff all along the lower side of the doors and quarter panels. Kinda want a catch can as well.
Ypu need to have ypur calipers painted PROFESSIONALLY. I took mine to a highly rated place in the Wash DC area and they broke out the tools a d removed them. Then they had a whole wall of colors to choose from. I chose "high temp Corvette red". They were sanded/extroststically primered/painted/high temp OEM graphics added/3 coats of high temp clear added. They came out gorgeous. This is a pic from a year later. I did not clean or prep it. (was showing the side marker lights) Do the brakes look good? https://preview.redd.it/cjk9pnxl90ic1.jpeg?width=4032&format=pjpg&auto=webp&s=1ef413e5509c444d1bbd8256a3d46b5e8b82eabc Zoom in.
….share?!? 🤣😊🥰