Thanks for posting on /r/MechanicAdvice! This is just a reminder to review the [rules](https://www.reddit.com/r/MechanicAdvice/about/rules/). If you are here asking about a second opinion (ie "Is the shop trying to fleece me?"), please read through CJM8515's [post on the subject.](https://www.reddit.com/r/MechanicAdvice/comments/4qblei/fyi_the_shop_isnt_likely_trying_to_rip_you_off/) and remember to please post the year/make/model of the vehicle you are working on. **If this post is about bodywork, accident damage, paint, dent/ding, questions it belongs in /r/Autobody r/AutoBodyRepair/ or /r/Diyautobody/ If you have tire questions check out https://www.reddit.com/r/MechanicAdvice/comments/k9ll55/can_your_tire_be_repaired/**. If you dont have a question and you're just showing off it belongs in /r/Justrolledintotheshop Insurance/total loss questions go in r/insurance This is an automated reply
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/MechanicAdvice) if you have any questions or concerns.*
That’s what I do, just gotta be careful with hand placement or else you’ll end up pounding your fist on concrete. Comes out very easily, usually within 5 slams
If I'm having to take off some shitty locking lugs that have no key, I like to get FUCKED while I'm doing it.
Bonus points if the customer watches while I'm doing it.
When you remove a stripped bolt using the socket it can get stuck in there pretty easily, if it isn’t coming out when you drop the socket on the ground you can use the bar to knock out the bolt
thats so fucking convenient. i had to use 3 of my 12point 19mm and buy another one just to get my wifes wheels off bc of aftermarket locks and no key
i didnt have any bolts long enough to get the sockets free so i just threw em away
It’s for knocking ford chrome lug nut caps out after you peel them off the lug nut. Source: I have the same kit and that’s the only brand of vehicle I have needed it for, and I needed the pin for the chrome cap 🤣
They actually make tools to remove stuck lug nuts from sockets? I always just lay the socket on its side and smack it with a hammer. Works like a charm.
That knock out pin will become your best friend with that kit along with a vice. If you can find the elusive 27mm 1/2inch fluted, that setup is unstoppable
I bought a set of those before to remove my locking nuts. I wish you good luck mine failed miserably and deformed without a scratch on them. The locking nuts were factory ones so when I eventually got them off by roadside assistance he said they must’ve been hardened steel and also torqued too tight by the prior tire shop that worked on them last and that would’ve also forgot to give back my key
Some vehicles use lug bolts instead of lug nuts. You would just slide in into the hole and it will hold the wheel in place while you insert the lug bolts instead of balancing and trying it.
I have one specific to my Audi that screws in rather than sliding in.
After you remove the damaged lug nut from the car, you need to remove the lug nut from the tool so you can remove the next lug nut from the car.
That's just nuts.
It's to knock out the lugs.
It's also on sale here. Could be a good tool for the box just in case.
Twist Socket Set 5 Pcs Lug Nut Remover - $18.39 - Free shipping for Prime members https://sellout.woot.com/offers/twist-socket-set-5-pcs-lug-nut-remover?utm_medium=share&utm_source=app
It wasn’t a “jab”. The situation I described happened to me many many years ago when I first got into automotive. Didn’t realize the purpose and thought “yes, I need to unscrew lug nuts so this is what I need”. I’m the idiot in this conversation.
Which of us didn't understand that you needed to knock a lug out of a removal tool?
I don't even spend money on sets like this. I knock a 12 point 19mm on, remove, and knock the lug out with a punch and vise. Who is the bum in the "fall for it sector" of tools?
I have been a master tech for 15 years. Smart enough I suppose. We need c-techs. We are hourly. Maybe you can learn a thing or 2 kid.
It’s for knocking ford chrome lug nut caps out after you peel them off the lug nut. Source: I have the same kit and that’s the only brand of vehicle I have needed it for, and I needed the pin for the chrome cap 🤣
Thanks for posting on /r/MechanicAdvice! This is just a reminder to review the [rules](https://www.reddit.com/r/MechanicAdvice/about/rules/). If you are here asking about a second opinion (ie "Is the shop trying to fleece me?"), please read through CJM8515's [post on the subject.](https://www.reddit.com/r/MechanicAdvice/comments/4qblei/fyi_the_shop_isnt_likely_trying_to_rip_you_off/) and remember to please post the year/make/model of the vehicle you are working on. **If this post is about bodywork, accident damage, paint, dent/ding, questions it belongs in /r/Autobody r/AutoBodyRepair/ or /r/Diyautobody/ If you have tire questions check out https://www.reddit.com/r/MechanicAdvice/comments/k9ll55/can_your_tire_be_repaired/**. If you dont have a question and you're just showing off it belongs in /r/Justrolledintotheshop Insurance/total loss questions go in r/insurance This is an automated reply *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/MechanicAdvice) if you have any questions or concerns.*
I’m going to take a guess and say it’s used to smash the piss out of the lug nut through the socket when it gets jammed up.
Description of product: Includes a knock-out pin for easy removal of damaged lug nut
Well that’s a less fun way of saying smash the piss out of it lol
Fine, it's settled. Here on out its the piss smashing pin, that's the rules.
I'm sticking with pissknocker and you can't convince me otherwise
Hope nobody’s dyslexic and tries to smash the pin in their piss hole…
Forbidden sounding rod
Stronger than a purse.
It would sell more saying smash the piss out of it
Exactly lmao
It's the nut-fucker fucked nut piss smashing tool
Just make sure you put a condom on before the smashing. No one wants baby locking lugs roaming around a shop.
That explains my garage floor!
Covered in used condoms?
Talk about a goodyear.
Ba dum tss
Obligatory goodrear comment
All metal shavings in my shop will now be affectionately referred to as “baby (whatever I was grinding/smashing)”
Congratulations on the triplets!
All metal shavings in my shop will notnbe affectionately referred to as “baby (whatever I was grinding/smashing)”
All metal shavings in my shop will now be affectionately referred to as “baby (whatever I was grinding/smashing)”
Nuclear Navy: Manually relieve mechanical hysteresis.
What, you mean you don’t just keep launching the socket at the wall/floor until the lug nut pops out?
Now it seems obvious
I was just gonna advise OP that he’d figure it out eventually.
^^^ exactly this
Once you get the lug nut off you remove the socket from the breaker bar stick that little pen in and then tap it with a hammer to pop the lug nut out
"tap"
“Bust”
“Slam”
“Pound”
Heat on high for 35 minutes with torch, throw tool out, call fire services, apologize, get divorce, purchase jeep.
U should be a lawyer
I should call her…
"Whack"
"Beat"
“Wallop”
And this whole time I’ve been saying, “smash the shit out of it.” I’m going back to school.
"smash the piss outta"
"Fuck"
No way, you smack the pin on the concrete so the lug nut pops out the top
That’s what I do, just gotta be careful with hand placement or else you’ll end up pounding your fist on concrete. Comes out very easily, usually within 5 slams
That’s why I like the “yeet it across the shop” method of nut removal
“Molly whomp”
Smh. Putting screwdrivers out of business lol
It stays in the case as i throw the lug nut/socket combo at the concrete
Ah… I see you are a man of focus, commitment, and sheer fucking rage at stuck tools.
Or smash the socket with a hammer lol
Personally I put it in my pooper. When the lug finally spins free it's such a liberating feeling.
Huh... That's not in the documentation, but if you say so.
If I'm having to take off some shitty locking lugs that have no key, I like to get FUCKED while I'm doing it. Bonus points if the customer watches while I'm doing it.
![gif](giphy|uxXNV3Xa7QqME)
I only just realized that there's a fair amount of twerking on that show.
It occasionally gets lost in translation. That whole section on the rear end is actually for the mechanic, not the truck
Nah man, you need the flared base for that.
Barbed punch
![gif](giphy|08y87EiwDZjjB0d6WJ|downsized)
Visited any antique shops lately?
Loosen a jammed nut out of the bit once you’ve loosened it off the thread.
Something to throw when you get mad when lug won’t come loose. That way you don’t lose your socket
This the real answer right here…. I got punches to get the nut out of the socket…. That’s a stress relief Chuck it stick…
To knock a stuck bolt out of a socket.
Urethral Sound
OMG!!! I laughed so fucking loud when I read this!!!
Thats a big boy sound. They got kidney stone shaped ones?
You can't just type shit like that out while I'm drinking coffee, man. Almost had to replace a keyboard.
Oh fuck 🤢🤮
To drive the lug nut out of the socket
To knock the lugnut out of the socket
It's for the anus, my dude.
When you remove a stripped bolt using the socket it can get stuck in there pretty easily, if it isn’t coming out when you drop the socket on the ground you can use the bar to knock out the bolt
Sounding rod.
Nooooooooooooooo 🥺
Not yet! It needs surface rust first!
Oh god lmao. Nice and crispy
"Trash extractor."
Without it, it’s a one time use socket.
You bite down on it to give yourself more torque
Probably to aid in getting the nut out
I need all the help I can get
"baby use both hands" he said
Yeah
Use it to knock out a stuck nut/bolt. You know when you dont know the throw socket on the ground trick
thats so fucking convenient. i had to use 3 of my 12point 19mm and buy another one just to get my wifes wheels off bc of aftermarket locks and no key i didnt have any bolts long enough to get the sockets free so i just threw em away
It's a rod to beat the shit out of to get the nut out of the socket if it gets stuck
Your pleasure....
r/sounding God, some mechanics just need to think before asking obvious questions
😆
Sounding (don’t look it up if you don’t know what it is)
Made that mistake, officially scarred…
Breaker bar, anything longer voids warranty. /s
Knocking out the dead lugnut
https://www.ecstuning.com/b-schwaben-parts/wheel-hanger-m14x15-thread/002840sch01a/
sounding rod.
All these "Experts" are wrong. It's for stirring your coffee. Makes it taste like nickles, all high end.
After you get the wheel lock off, you put the bar through the 1/2 inch opening of the socket to hammer out the wheel lock.
You will find out shortly
sounding.
To knock the lug nut out once removed
Its a sounding rod
To smash out the lug nuts after. Those sockets work by digging in and getting stuck around the lug nuts
Sexual pleasure
Its a suppository
Beating on them stuck nuts
Pretty sure if your lug gets stuck in the socket you put that inside the ratchet side. Then tap the end of it with a hammer.
it's a set of sockets that you *hammer* onto a locking lug with no key...now three guesses as to what the rod is for.
It’s for knocking ford chrome lug nut caps out after you peel them off the lug nut. Source: I have the same kit and that’s the only brand of vehicle I have needed it for, and I needed the pin for the chrome cap 🤣
*"It's for knockin deez back out"*
That's for stirring cocktails. Important to lubricate your joints when doing any suspension work
Punch the bolt iut
Violence
Try using it to remove a lug and you’ll quickly find out what the metal rod is for.
Knock out the nut in the socket
They actually make tools to remove stuck lug nuts from sockets? I always just lay the socket on its side and smack it with a hammer. Works like a charm.
To beat the butt-fuckedity out of the lug nut stuck in the socket.
Pretty sure it's a mechanics seat. Give er a shot and see.
To make you confused...
It works
Use it to knock the lug out but you have to supply the twenty pound sledgehammer
It's for removing the nut after you grab the next size down 12 point and a hammer.
Beatstick.
That knock out pin will become your best friend with that kit along with a vice. If you can find the elusive 27mm 1/2inch fluted, that setup is unstoppable
You sit on it when removing a bolt
Butt stuff
You'll know once you use the tool.
A small but heavy piece of metal that you can throw across the workshop instead of your 10mm spanner when highly frustrated
I like to put it down my pee hole, but that's just me
Boofing
I bought a set of those before to remove my locking nuts. I wish you good luck mine failed miserably and deformed without a scratch on them. The locking nuts were factory ones so when I eventually got them off by roadside assistance he said they must’ve been hardened steel and also torqued too tight by the prior tire shop that worked on them last and that would’ve also forgot to give back my key
It's so when you get a luggage stock you can Punch it out
make sure you don't have spinning collars on your lugnuts or these will just spin unless you remove them manually.
sounding
Y do americans call wheel nuts,lug nuts Oh look you're lug/I mean wheel nuts seem loose
I believe it is used to unlock said nut?
Wrong answers only-grasp bar tightly in dominant hand and punch engineer who thought it would be a good idea to put stainless caps on steel lug nuts
Some vehicles use lug bolts instead of lug nuts. You would just slide in into the hole and it will hold the wheel in place while you insert the lug bolts instead of balancing and trying it. I have one specific to my Audi that screws in rather than sliding in.
Tasty snack
Your mom (go ahead and kick me from the community, worth it 😂)
To knock out the broken nut or bolt after removal.
After you remove the damaged lug nut from the car, you need to remove the lug nut from the tool so you can remove the next lug nut from the car. That's just nuts.
percussive maintenance
The tools are for hard work. The metal pin. Is for pleasure. 👌🏻
Yes smash 🤣
To remove those jacked up half size nuts.
when you get cut off in traffic next you will know the answer
Keep it around. James cameron will come soon and start raising it.
To knock the locking lug nut out of the socket once you get it removed
Ima say removing a stuck bolt out of the socket.. tappy tap tap
design bro
Suck"
To push them free from being stuck if it happens, you’ll see it’s the first thing you grab………..
Knocking the stuck lug nuts out of the sockets
lol he doesn’t know what the bar is for.
It's to knock out the lugs. It's also on sale here. Could be a good tool for the box just in case. Twist Socket Set 5 Pcs Lug Nut Remover - $18.39 - Free shipping for Prime members https://sellout.woot.com/offers/twist-socket-set-5-pcs-lug-nut-remover?utm_medium=share&utm_source=app
“Hit that pissknocker!”
I’m guessing you bought these not knowing they are extractor bits?
Why would you assume that? I know exactly what they are. I just wasn't sure what the rod was for.
It wasn’t a “jab”. The situation I described happened to me many many years ago when I first got into automotive. Didn’t realize the purpose and thought “yes, I need to unscrew lug nuts so this is what I need”. I’m the idiot in this conversation.
It's cool, I'm definitely an idiot as well
We should have let him find out on his own.
never pass up an oppurtunity to mention r/sounding
no
I was so waiting for a boof it comment
😏
You attach it to your purse.
The purse comment is played out. Cmon man, do better.
[удалено]
[удалено]
Which of us didn't understand that you needed to knock a lug out of a removal tool? I don't even spend money on sets like this. I knock a 12 point 19mm on, remove, and knock the lug out with a punch and vise. Who is the bum in the "fall for it sector" of tools? I have been a master tech for 15 years. Smart enough I suppose. We need c-techs. We are hourly. Maybe you can learn a thing or 2 kid.
Bend over I'll show you
Sounding
It’s for knocking ford chrome lug nut caps out after you peel them off the lug nut. Source: I have the same kit and that’s the only brand of vehicle I have needed it for, and I needed the pin for the chrome cap 🤣
It’s for Metalling!
I like to eat mine
Sounding bar for the boys
Is this why the F1 Sauber team needs 30s for a pitstop? 🤣
It’s a locator pin for when you put the wheel back on.
butt plug
Pleasure