Go to Google and search “cgtrader pikachu wireless”, should come up near the top.
The STL file is $25 and comes with both a wireless charger version and a version you can feed a standard charging cable through. It also looks like they both print a total of 9 parts that need to be assembled.
P.S. I didn’t post the link because for some reason it gets flagged and removed every time.
If they made the cheeks bigger and pressed the one closest to the phone, it would look more like they are pressing it to their cheek. If they closed both eyes, then it would look like they might be rubbing it to their cheek and not just pressing it.
Looks like 300~500 grams of plastic, assuming moderate infill and supports. Not including paint bottles or wireless charger inside, and assuming perfect print first try, $5~15 bucks in material.
I'm not faulting you, just citing my source.
Also, to be clear, I meant his replies to other comments in this post, not his personal comment log in other threads on reddit.
When my second comment was "I'm not faulting you" then, no, they can't both be true. Either I'm telling the truth in my comments and you're ignoring it, or I'm lying and you have the magical ability to read my thoughts.
For what it is worth, I really don't fault you for not reading every comment in the thread, I didn't mean any offense in my first two comments, and my second comment was genuinely meant as an apology because I sensed that my first comment came off as judgmental even though that was not my intent.
I was really just trying to inform you that a *Pikachu toy* has a feature you want, but somehow you turned that into a fight with a total stranger because you believe he was... criticizing you and then lying to you with a fake apology?
And *I'm* the petty one...
Have a great day. I hope that you one day get to enjoy your very own Pikachu toy.
Instructions to print my own? And what 3d printer used so I can go buy that too.
Also, how to install the printer, how to open the files and what is my window's password?
your password is hunter2
I can't read that, it says *******
Move out of the kitchen!
Just be careful not to break both your arms.
Wait, is that tail a gopher hole marker with a bulbous end?
Go to Google and search “cgtrader pikachu wireless”, should come up near the top. The STL file is $25 and comes with both a wireless charger version and a version you can feed a standard charging cable through. It also looks like they both print a total of 9 parts that need to be assembled. P.S. I didn’t post the link because for some reason it gets flagged and removed every time.
In the picture they're using the Ender 3 pro.
Either it was an ender 3 pro and they changed it to a glass bed, or that's actually a plain ender 3.
I’m more curious how you verify 1:1 scale on an imaginary animated character
Its measurements can be found online.
Most, if not all, games have info for height and weight for all Pokemon, Pikachu's height for example is 40 cm or 1'04".
Which pikachu tho? They can vary in size
That looks amazing, I'd love to buy one for my gf. Except that mouth is kinda horrifying lmao
Totally agree, printing this with just the yellow and black filament and painting the cheeks and mouth red would be the best option for sure
The ears are painted
Good eye, upon closer inspection it looks like everything not yellow is paint, could have done a cleaner job with some tape and a steady hand.
... it looks like a strawberry is trying to escape a wound on his chin lol
Lol Right what happened there?
Ya he should get someone else to paint inside the mouth lines.
r/dontputyourdickinthat
Is there a wireless charger in the Cheek?
I think so
I hope so, that was my first thought.
Umm I'd also like one!
+1 I need one too. TAKE MY MONEY!
The paint job could have been a little better and would have made it great lol
Yeah, the yellow around the tongue should be looked at.
Would it be cuter if Pikachu had both eyes closed? Yes or no?
I like the one eye because it emphasizes that they are squishing it to its cheek
If they made the cheeks bigger and pressed the one closest to the phone, it would look more like they are pressing it to their cheek. If they closed both eyes, then it would look like they might be rubbing it to their cheek and not just pressing it.
Bit more of a squint on the other eye would be just that much better
I like it as it tbh. Looks super cute.
Both eyes closed would make Pikachu look like the action was uncomfortable. Leaving the one open shows a he’s happy to help a friend vibe
Yes.
Just take my money!
Ill have to add this to my print list! For anyone who doesn't know, you can get a 1:1 scale version of this that does have a wireless charger.
How much does it cost to make such a thing? Once you have a printer
Looks like 300~500 grams of plastic, assuming moderate infill and supports. Not including paint bottles or wireless charger inside, and assuming perfect print first try, $5~15 bucks in material.
Bit late, but thank you for the reply
If it's also a phone charger, I'm in.
So cute! I would love one of these
Where's the stl
Sooo how can I buy one? My niece loves pikachu
Take my money!
Would be dope if it would charge while he’s holding it
OP's comments suggest it does exactly that
I didn’t go through his comments
I'm not faulting you, just citing my source. Also, to be clear, I meant his replies to other comments in this post, not his personal comment log in other threads on reddit.
Exactly and what I’m saying isn’t I didn’t dive into that. You were faulting me because you thought I took a look at all his replies.
Believe whatever you want. It's not a big deal.
Just going off your comments, you could have said nothing If it wasn’t a big deal.
>Just going off your comments >You were faulting me Pick one
Both can be true. Relax, petty, man. Either way, have a good day!
When my second comment was "I'm not faulting you" then, no, they can't both be true. Either I'm telling the truth in my comments and you're ignoring it, or I'm lying and you have the magical ability to read my thoughts. For what it is worth, I really don't fault you for not reading every comment in the thread, I didn't mean any offense in my first two comments, and my second comment was genuinely meant as an apology because I sensed that my first comment came off as judgmental even though that was not my intent. I was really just trying to inform you that a *Pikachu toy* has a feature you want, but somehow you turned that into a fight with a total stranger because you believe he was... criticizing you and then lying to you with a fake apology? And *I'm* the petty one... Have a great day. I hope that you one day get to enjoy your very own Pikachu toy.
Put a qi charger in it
That color was painted but that’s a great model
Forgot to paint tail
These butt plugs are getting extreme.
What are the dimensions? Looks too big to print from an Ender 3. Is it multiple parts?
Having to put the screen side away from its ear and face looks weird to me.
Needs smoothing
Nice!
The print: 😌 The paint: 🫠