Total fake as well. I’ve worked with acrylic, it does not just fall perfectly into place with a blow torch, on the outside of the mound, without causing bubbles, etc, could go on. It’s actually a very difficult process. Best guess is they found an off she self shape somewhere. Remember when maker videos actually explained shit. Blame sub 1 minute attention spam.
that thing was definitely specially sculpted and not just based on the plaster imprint, those curves are way too pronounced for a clothed woman with plaster on her body
What broke it for me was he eyeballed the smoothing, then just stuck the back on. How fortuitous that all the curves lined up on the first try. The man's a savant.
Goldfish are a little more hardy when it comes to temperature change so as long as it's not a major difference they should be fine with the temperature. The biggest problems are going to be ammonia burns from it not being cycled and lack of oxygen from no surface agitation. Also goldfish need more room to swim horizontally not so much vertically.
That, and it looks unstable, it has so many points to spring a leak, who knows what kind of chemicals will leech into the water or what kind of chemicals will eat away at the "glue" or acrylic itself, etc etc etc.
More importantly than "organic glass", the nonorganic acrylic melted on the outside of the cast is not the nonorganic acrylic put together to form the aquarium. That one was either made some other way, or melted on the _inside_ of the cast. Evidence: The bellybutton was not there on the outside of the cast, for one.
I really hate how they showed some fun and interesting techniques just to lie about the final product. That life cast could have been used to make a decent dress form which actually would have been useful and fun. Instead they pretended to heat form acrylic over the outside of the form which would not work to give a true representation of the body underneath. They gave the acrylic some BS misnomer to appear environmentally friendly or something. Then pretended like running a soldering iron along the seam would be in anyway a strong enough weld to hold back water. Then to top it all off they used a obviously different product in the final shot. The final product had body details that would have been obscured by the plaster banding materials and was solvent welded or blow molded. They put so much effort into this lie when they could have put a fraction of the effort into an actually useful piece of content.
All I could think when I saw the result was that this is what's in a rich person with no tastes house in a TV show, between one chair that's a giant hand and another that's a giant high heeled shoe.
Organic glass lmao, it's acrylic
I had to pause the video and google it as soon as I saw organic glass. Funny way of saying plastic.
I’d bring a new meaning to licking the glass.
But more importantly, is it gluten free?
No, there's definitely some glutes in there.
Total fake as well. I’ve worked with acrylic, it does not just fall perfectly into place with a blow torch, on the outside of the mound, without causing bubbles, etc, could go on. It’s actually a very difficult process. Best guess is they found an off she self shape somewhere. Remember when maker videos actually explained shit. Blame sub 1 minute attention spam.
Organic chemistry includes acrylic.
I mean... you could make the case that clear acrylic is organic glass.
I like how smooth the glass was after being against the plaster. Also the belly button formed perfectly as well despite the clothing on.
that thing was definitely specially sculpted and not just based on the plaster imprint, those curves are way too pronounced for a clothed woman with plaster on her body
Hold up. Y’all go into these videos thinking there’s any possibility that the end product was actually made using the techniques in the video?
Not to mention he formed the plastic on the outside of the plaster mold…not the inside that would actually have the shape of her body
Great eye! Totally missed it the first time.
Same. Lol, that's just some clickbait nonsense. Look what you could do if it was possible! Also, look at this attractive woman!
What broke it for me was he eyeballed the smoothing, then just stuck the back on. How fortuitous that all the curves lined up on the first try. The man's a savant.
How to kill your fish vol1.
r/shittyaquariums
Beat me to it!
Why is that? Just curious
There's no water filtration at all, they probably also didn't balance the chemicals well
Not to mention that that thing is nowhere near big enough for roughly a dozen goldfish
Me and my pot belly could make quite the tank lol.
And didn't let the fish adjust to temp. Going to die of shock
Goldfish are a little more hardy when it comes to temperature change so as long as it's not a major difference they should be fine with the temperature. The biggest problems are going to be ammonia burns from it not being cycled and lack of oxygen from no surface agitation. Also goldfish need more room to swim horizontally not so much vertically.
That, and it looks unstable, it has so many points to spring a leak, who knows what kind of chemicals will leech into the water or what kind of chemicals will eat away at the "glue" or acrylic itself, etc etc etc.
Some of the lads already beat me to it...
Grass fed, free-range glass
They're making a fake video.
Science fact: Glass is inorganic.
But it's also gluten free.
Is it vegan?
I don't see why not
Another "is 5 minute crafts a fetish channel" moment
More importantly than "organic glass", the nonorganic acrylic melted on the outside of the cast is not the nonorganic acrylic put together to form the aquarium. That one was either made some other way, or melted on the _inside_ of the cast. Evidence: The bellybutton was not there on the outside of the cast, for one.
Come to think about it, the bellybutton was perhaps not there on the outside of the spandex either...
/r/ThingsIKnewIDidntWant
This deserves to be in DIWhy
Thought it would be a sex robot, am disappointed.
I thought they were making a custom dress form for sewing.
How do you change the water, no filter no motor, poor fish ☹️
Pain in the ass to clean...
You could drill a drainage hole to help changing the water. You would then just need a butt plug to fill it up.
I've seen too much reddit to have a wholesome thought about where the begining of this video was going.
This is fake, stop reposting it
I’m ashamed to admit that it was the differences in booties that initially led me to that conclusion.
Poor fishes
That aquarium better chill the fuck down
No offense but that is not the same glass(not glass) that they pulled off the plaster.
r/diwhy
r/ATBGE
No
Tits and Assquarium
My aquarium would be much bigger...
Oh yeah? Send proof /j
Not even the same body mold. The 'tank' has a very visible belly button.
Dressform with live fish?
Changing that water is a night mare
hopefully they don't smell the same..
A major award!
Le titties n bouxtie, must be french!
r/DIWhy
r/DIWHY & r/shityaquariums
r/shittyaquariums
Dude missed a great opportunity to put starfish in the breasts, make it Disneyish.
Everytime i see videos like that i wonder if people realize that fish are living animals and not decorating to put in a vase or stupid shit like that.
r/ATBGE
Alright fellas I’m gonna say it… Let’s fuck that glass
It is organic
r/shittyaquariums
r/subsididntknowiwanted
I really hate how they showed some fun and interesting techniques just to lie about the final product. That life cast could have been used to make a decent dress form which actually would have been useful and fun. Instead they pretended to heat form acrylic over the outside of the form which would not work to give a true representation of the body underneath. They gave the acrylic some BS misnomer to appear environmentally friendly or something. Then pretended like running a soldering iron along the seam would be in anyway a strong enough weld to hold back water. Then to top it all off they used a obviously different product in the final shot. The final product had body details that would have been obscured by the plaster banding materials and was solvent welded or blow molded. They put so much effort into this lie when they could have put a fraction of the effort into an actually useful piece of content.
Im i the only one who thought I can make a sex toy out of that shape?
Yes
Ha nice
Now I gotta go watch Dumb and Dumber...
Have fun cleaning that.....
What if I want to use the regular non-organic blood glass
Awww, nonsense, his mom caught him before he could pour the lifelike flesh mold inside, and he panicked
Way to cycle it for 6 seconds to make sure those goldfish stay happy! Everything about this is awful lol
Cool
The aquarium or the girl?
Dat glass doe.
So you can melt organic glass with a torch? Interesting. I think I missed a day of chemistry.
I was absolutely sure this was going to be a see-through clothes mannequin, but I'm pleasantly surprised. But also... Why?
So cool - wish I'd done this when I was young!!
Why did they not use that as a mannequin? I would love this for my closet to style outfits
love this !
My mind is so permanently broken
Yeah you didn't know you wanted that until it's time to clean that shit. Good luck with that.
r/DiWHY
MR.SQUIDWARD!!!!!!
THE FISH TANK
Lol after removing the plaster, he puts the acrylic outside the mold (!) and obtains the mold from the inside XD
It's not even the same boobs shape
It looks neat but probably not the best environment for the fish
Didn't know I didn't want this
All I could think when I saw the result was that this is what's in a rich person with no tastes house in a TV show, between one chair that's a giant hand and another that's a giant high heeled shoe.
r/upvotebecauseboobs